Micromechanical modeling of discontinuous shear thickening in granular media-fluid suspension

2017 ◽  
Vol 61 (2) ◽  
pp. 265-277 ◽  
Author(s):  
Daniel H. Johnson ◽  
Farshid Vahedifard ◽  
Bohumir Jelinek ◽  
John F. Peters
Keyword(s):  
Granular Media ◽  
Shear Thickening ◽  
Micromechanical Modeling

scholarly journals Pattern Formation and flow to Fracture Transitions in Granular and Sheer Thickening Materials

2020 ◽  
Author(s):  
◽  
Deren Ozturk
Keyword(s):  
Food Processing ◽  
Granular Media ◽  
Shear Thickening ◽  
Body Armour ◽  
Fracture Patterns ◽  
Fracture Formation ◽  
Fracture Transition ◽  
Frictional Forces ◽  
The Subject ◽  
Hele Shaw Cell

The conditions under which a mixture of water and grains will fracture like a solid, rather than flow like a liquid, is the subject of this thesis. Flow to fracture transitions in saturated granular materials are relevant to numerous geological and engineering environments, in-cluding magma cavern activity, methane venting on seabeds, carbon dioxide storage, food processing, and innovations in body armour. To examine the flow to fracture transition, two systems are considered. The first is gas-driven fracturing of settled granular media, a slow creeping process that forms labyrinthine patterns. The second is gas-driven fractur-ing of suspended cornstarch particles, a system which exhibits fascinating “discontinuous shear thickening” behaviour, a topic of much debate in literature. Both systems are sub-ject to experiments within a Hele-Shaw cell, which enables the visualisation of pseudo-2D invasion flow or fracture patterns. Image analysis performed on these patterns led to the application of theories that can predict their behaviours. Fracture formation is found to be a friction dominated process. The invading pressure pushes on the local grains while surface tension of the receding water pulls on them until frictional forces become strong enough to maintain a front, forcing the pressure to disturb grains elsewhere, and in do-ing so extend and branch the fractures forming a patterned network. Various parameter studies are performed to uncover the variables that determine why a mixture might flow or fracture. Interestingly, the first system is found to transition from fracturing to flowing with increasing pressures, whilst the second system is found to do the opposite.

Role of contact couples and couple stress in the behaviour of granular media

1998 ◽  
Vol 08 (PR8) ◽  
pp. Pr8-87-Pr8-94
Author(s):  
F. Dedecker ◽  
Ph. Dubujet ◽  
B. Cambou
Keyword(s):  
Couple Stress ◽  
Granular Media

Avalanche Stratification - Experimental Tests of the “Metastable Wedge” and “Continuous Flow” Models

2000 ◽  
Vol 627 ◽  
Author(s):  
M. E. Swanson ◽  
M. Landreman ◽  
J. Michel ◽  
J. Kakalios
Keyword(s):  
Continuous Flow ◽  
Granular Media ◽  
Experimental Tests ◽  
Coarse Sand ◽  
Angle Of Repose ◽  
Flow Models ◽  
Maximum Angle ◽  
Stratification Effect ◽  
Upward Moving ◽  
Moving Layer

ABSTRACTWhen an initially homogeneous binary mixture of granular media such as fine and coarse sand is poured near the closed edge of a “quasi-two-dimensional” Hele-Shaw cell consisting of two vertical transparent plates held a narrow distance apart, the mixture spontaneously forms alternating segregated layers. Experimental measurements of this stratification effect are reported in order to determine which model, one which suggests that segregation only occurs when the granular material contained within a metastable heap between the critical and maximum angle of repose avalanches down the free surface, or one for which the segregation results from smaller particles becoming trapped in the top surface and being removed from the moving layer during continuous flow. The result reported here indicate that the Metastable Wedge model provides a natural explanation for the initial mixed zone which precedes the formation of the layers, while the Continuous Flow model explains the observed upward moving kink of segregated material for higher granular flux rates, and that both mechansims are necessary in order to understand the observed pairing of segregated layersfor intermediate flow rates and cell separations.

Stress fields in granular material and implications for performance of robot locomotion over granular media

2015 ◽  
Vol 8 (1) ◽  
pp. 2005-2009
Author(s):  
Diandong Ren ◽  
Lance M. Leslie ◽  
Congbin Fu
Keyword(s):  
Mechanical Properties ◽  
Granular Material ◽  
Granular Media ◽  
Rotation Frequency ◽  
Legged Locomotion ◽  
Working Environment ◽  
Navier Stokes ◽  
Maximum Speed ◽  
Sigmoid Curve ◽  
Multi Body

 Legged locomotion of robots has advantages in reducing payload in contexts such as travel over deserts or in planet surfaces. A recent study (Li et al. 2013) partially addresses this issue by examining legged locomotion over granular media (GM). However, they miss one extremely significant fact. When the robot’s wheels (legs) run over GM, the granules are set into motion. Hence, unlike the study of Li et al. (2013), the viscosity of the GM must be included to simulate the kinematic energy loss in striking and passing through the GM. Here the locomotion in their experiments is re-examined using an advanced Navier-Stokes framework with a parameterized granular viscosity. It is found that the performance efficiency of a robot, measured by the maximum speed attainable, follows a six-parameter sigmoid curve when plotted against rotating frequency. A correct scaling for the turning point of the sigmoid curve involves the footprint size, rotation frequency and weight of the robot. Our proposed granular response to a load, or the ‘influencing domain’ concept points out that there is no hydrostatic balance within granular material. The balance is a synergic action of multi-body solids. A solid (of whatever density) may stay in equilibrium at an arbitrary depth inside the GM. It is shown that there exists only a minimum set-in depth and there is no maximum or optimal depth. The set-in depth of a moving robot is a combination of its weight, footprint, thrusting/stroking frequency, surface property of the legs against GM with which it has direct contact, and internal mechanical properties of the GM. If the vehicle’s working environment is known, the wheel-granular interaction and the granular mechanical properties can be grouped together. The unitless combination of the other three can form invariants to scale the performance of various designs of wheels/legs. Wider wheel/leg widths increase the maximum achievable speed if all other parameters are unchanged.

β-Cyclodextrin Polymers on Microcrystalline Cellulose as a Granular Media for Organic Micropollutant Removal from Water

2018 ◽  
Author(s):  
Diego Alzate-Sanchez ◽  
Yuhan Ling ◽  
Chenjun Li ◽  
Benjamin Frank ◽  
Reiner Bleher ◽  
...  
Keyword(s):  
Microcrystalline Cellulose ◽  
Continuous Flow ◽  
Granular Media ◽  
Anaerobic Biodegradation ◽  
Thin Coating ◽  
Micropollutant Removal ◽  
Cyclodextrin Polymers ◽  
Flow Experiments ◽  
Aerobic And Anaerobic ◽  
Cellulose Composite

This manuscript describes cyclodextrin polymers formed as a thin coating on microcrystalline cellulose. The resulting polymer/cellulose composite shows promising performance for removing organic pollutants from water and can be packed into columns for continuous-flow experiments. The polymer/cellulose composite also shows excellent resistance to aerobic and anaerobic biodegradation.

Structure of a shear-thickening polysaccharide extracted from the New Zealand black tree fern, Cyathea medullaris

2020 ◽  
Author(s):  
M Wee ◽  
M Mastrangelo ◽  
Susan Carnachan ◽  
Ian Sims ◽  
K Goh
Keyword(s):  
New Zealand ◽  
Uronic Acid ◽  
Average Molecular Weight ◽  
Shear Thickening ◽  
Water Soluble ◽  
Size Exclusion ◽  
Resonance Spectroscopy ◽  
Tree Fern ◽  
13C Nuclear Magnetic Resonance ◽  
Exclusion Chromatography

A shear-thickening water-soluble polysaccharide was purified from mucilage extracted from the fronds of the New Zealand black tree fern (Cyathea medullaris or 'mamaku' in Māori) and its structure characterised. Constituent sugar analysis by three complementary methods, combined with linkage analysis (of carboxyl reduced samples) and 1H and 13C nuclear magnetic resonance spectroscopy (NMR) revealed a glucuronomannan comprising a backbone of 4-linked methylesterified glucopyranosyl uronic acid and 2-linked mannopyranosyl residues, branched at O-3 of 45% and at both O-3 and O-4 of 53% of the mannopyranosyl residues with side chains likely comprising terminal xylopyranosyl, terminal galactopyranosyl, non-methylesterified terminal glucopyranosyl uronic acid and 3-linked glucopyranosyl uronic acid residues. The weight-average molecular weight of the purified polysaccharide was ~1.9×106Da as determined by size-exclusion chromatography coupled with multi-angle laser light scattering (SEC-MALLS). The distinctive rheological properties of this polysaccharide are discussed in relation to its structure. © 2014 Elsevier B.V.

Analysis of process of emulsions transport in hydrophilic/oleophilic granular porous media driven by capillary force

2018 ◽  
Vol 2 (21) ◽  
pp. 85-101
Author(s):  
Olga Shtyka ◽  
Łukasz Przybysz ◽  
Mariola Błaszczyk ◽  
Jerzy P. Sęk
Keyword(s):  
Porous Media ◽  
Experimental Research ◽  
Granular Media ◽  
Single Phase ◽  
Influential Factor ◽  
Dispersed Phase ◽  
Porous Structures ◽  
Phase Concentration ◽  
Granular Porous Media ◽  
Kinetics Of

The research focuses on the issues concerning a process of multiphase liquids transport in granular porous media driven by the capillary pressure. The current publication is meant to introduce the results of experimental research conducted to evaluate the kinetics of the imbibition and emulsions behavior inside the porous structures. Moreover, the influence of the dispersed phase concentration and granular media structure on the mentioned process was considered. The medium imbibition with emulsifier-stabilized emulsions composed of oil as the dispersed phase in concentrations of 10 vol%, 30 vol%, and 50 vol%, was investigated. The porous media consisted of oleophilic/hydrophilic beads with a fraction of 200–300 and 600–800 μm. The experimental results provided that the emulsions imbibition in such media depended stronger on its structure compare to single-phase liquids. The increase of the dispersed phase concentration caused an insignificant mass decreasing of the imbibed emulsions and height of its penetration in a sorptive medium. The concentrations of the imbibed dispersions exceeded their initial values, but reduced with permeants front raise in the granular structures that can be defined as the influential factor for wicking process kinetics.

Development of Flexible Extremities Protection utilizing Shear Thickening Fluid/Fabric Composites

2012 ◽  
Author(s):  
Mahesh Hosur ◽  
Norman Wagner ◽  
C. T. Sun ◽  
Vijaya Rangari ◽  
Jack Gillespie ◽  
...  
Keyword(s):  
Shear Thickening ◽  
Shear Thickening Fluid ◽  
Fabric Composites
Sign in / Sign up

Export Citation Format

Share Document