The optimal weight vectors research on the far-field sound field control of the low-frequency phased array

2016 ◽  
Vol 140 (4) ◽  
pp. 3407-3407
Author(s):  
Haifeng Lee ◽  
Li Ma
Keyword(s):  
Phased Array ◽  
Low Frequency ◽  
Sound Field ◽  
Far Field ◽  
Optimal Weight ◽  
Field Control ◽  
Field Sound

scholarly journals An Analytical Solution for the Vibration and Far-Field Sound Radiation Analysis of Finite, Semisubmerged Cylindrical Shells

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Wenjie Guo ◽  
Zhou Yang ◽  
Yueyang Han
Keyword(s):  
Cylindrical Shell ◽  
Free Surface ◽  
Present Method ◽  
Sound Pressure ◽  
Low Frequency ◽  
Sound Radiation ◽  
Far Field ◽  
Vibration Responses ◽  
Frequency Excitation ◽  
Field Sound

The vibration response and far-field sound radiation of a semisubmerged, finite cylindrical shell with low-frequency excitation are studied. The solution to this problem can be divided into two steps. The first step is to apply the wave propagation approach to determine the vibration response of the cylindrical shell. In the cylindrical coordinate system, the Flügge shell equations and Laplace equation are used to describe the cylindrical shell and surrounding fluid so that the vibration responses of the shell can be addressed analytically. The fluid free surface effect is taken into account by applying the sine series to force the velocity potential on the free surface to be zero. Furthermore, compared with the FEM (the finite element method), the present method is not only reliable but also effective. In the second step, the far-field sound radiation is solved by the Fourier transform technique and the stationary phase method in accordance with the vibration responses of the shell from the previous step. The boundary element method is applied to validate the reliability of the acoustical radiation calculation. The circumferential directivity of far-field sound pressure is discussed, and it is found that the maximum value of the sound pressure always appears directly under the structure when the driving frequencies are relatively low. Besides, in consideration of simplicity and less computation effort, the present method can be used for the rapid prediction of the vibration and far-field sound pressure of a semisubmerged cylindrical shell with low-frequency excitation.

Laboratory and in situ sound absorption measurement under a synthetized diffuse acoustic field

2019 ◽  
Vol 26 (4) ◽  
pp. 223-242
Author(s):  
Olivier Robin ◽  
Alain Berry ◽  
Celse Kafui Amédin ◽  
Noureddine Atalla ◽  
Olivier Doutres ◽  
...  
Keyword(s):  
Acoustic Field ◽  
Sound Absorption ◽  
Low Frequency ◽  
Sound Field ◽  
Geometrical Parameters ◽  
In Situ Conditions ◽  
Field Excitation ◽  
Acoustic Environments ◽  
Field Sound

This article reports numerical and experimental results concerning the estimation of the diffuse field sound absorption coefficient of several different materials under a synthetized diffuse acoustic field excitation in laboratory and in situ conditions. The proposed measurement method is based on a sound field reproduction approach and a synthetic array of acoustic monopoles facing the material to be tested. Numerical simulations are first conducted to optimize the geometrical parameters of the method and to compute theoretical sound absorption coefficients of the considered materials. Measurements on a set of six typical acoustic materials are then conducted following the standardized reverberant room method as well as the proposed approach in a hemi-anechoic room and in two realistic rooms. Albeit showing limitations in the low-frequency domain, the proposed method enables a significant reduction of the tested specimen dimensions compared with the reverberant room method and allows performing tests in non-ideal acoustic environments.

scholarly journals Digital Predistortion of Phased-Array Transmitter With Shared Feedback and Far-Field Calibration

2021 ◽  
Vol 69 (1) ◽  
pp. 1000-1015
Author(s):  
Nuutti Tervo ◽  
Bilal Khan ◽  
Olli Kursu ◽  
Janne P. Aikio ◽  
Markku Jokinen ◽  
...  
Keyword(s):  
Phased Array ◽  
Far Field ◽  
Digital Predistortion ◽  
Field Calibration

scholarly journals Structural and Acoustic Responses of a Submerged Stiffened Conical Shell

2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Meixia Chen ◽  
Cong Zhang ◽  
Xiangfan Tao ◽  
Naiqi Deng
Keyword(s):  
Conical Shell ◽  
Element Model ◽  
Analytical Models ◽  
Superposition Method ◽  
Far Field ◽  
Fluid Loading ◽  
Low Frequencies ◽  
Structural Responses ◽  
The Individual ◽  
Field Sound

This paper studies the vibrational behavior and far-field sound radiation of a submerged stiffened conical shell at low frequencies. The solution for the dynamic response of the conical shell is presented in the form of a power series. A smeared approach is used to model the ring stiffeners. Fluid loading is taken into account by dividing the conical shell into narrow strips which are considered to be local cylindrical shells. The far-field sound pressure is solved by the Element Radiation Superposition Method. Excitations in two directions are considered to simulate the loading on the surface of the conical shell. These excitations are applied along the generator and normal to the surface of the conical shell. The contributions from the individual circumferential modes on the structural responses of the conical shell are studied. The effects of the external fluid loading and stiffeners are discussed. The results from the analytical models are validated by numerical results from a fully coupled finite element/boundary element model.

Hydrodynamic Noise and Radiated Mechanism of 3D Cavity

2012 ◽  
Vol 217-219 ◽  
pp. 2590-2593 ◽  
Author(s):  
Yu Wang ◽  
Bai Zhou Li
Keyword(s):  
Sound Pressure ◽  
Near Field ◽  
Low Frequency ◽  
Dipole Source ◽  
Fluctuating Pressure ◽  
Common Structure ◽  
Hydrodynamic Noise ◽  
Near Field Sound ◽  
Equivalent Sources ◽  
Field Sound

The flow past 3D rigid cavity is a common structure on the surface of the underwater vehicle. The hydrodynamic noise generated by the structure has attracted considerable attention in recent years. Based on LES-Lighthill equivalent sources method, a 3D cavity is analyzed in this paper, when the Mach number is 0.0048. The hydrodynamic noise and the radiated mechanism of 3D cavity are investigated from the correlation between fluctuating pressure and frequency, the near-field sound pressure intensity, and the propagation directivity. It is found that the hydrodynamic noise is supported by the low frequency range, and fluctuating pressure of the trailing-edge is the largest, which is the main dipole source.

Ground Attenuation Factor Based on Measurements

2021 ◽  
Vol 263 (3) ◽  
pp. 3436-3447
Author(s):  
Dan Lin ◽  
Andrew Eng
Keyword(s):  
Near Field ◽  
Attenuation Factor ◽  
Measurement Data ◽  
Low Frequency ◽  
Sound Sources ◽  
Frequency Sound ◽  
Sound Levels ◽  
Different Types ◽  
Noise Measurements ◽  
Field Sound

Assumptions made on the ground types between sound sources and receivers can significantly impact the accuracy of environmental outdoor noise prediction. A guideline is provided in ISO 9613-2 and the value of ground factor ranges from 0 to 1, depending on the coverage of porous ground. For example, a ground absorption factor of 1 is suggested for grass ground covers. However, it is unclear if the suggested values are validated. The purpose of this study is to determine the sound absorption of different types of ground by measurements. Field noise measurements were made using an omnidirectional loudspeaker and two microphones on three different types of ground in a quiet neighborhood. One microphone was located 3ft from the loudspeaker to record near field sound levels in 1/3 and 1 octave bands every second. The other microphone was located a few hundred feet away to record far field sound in the same fashion as the near field microphone. The types of ground tested were concrete, grass, and grass with trees. Based on the measurement data, it was found that grass and trees absorb high frequency sound well and a ground factor of 1 may be used for 500Hz and up when using ISO 9613-2 methodology. However, at lower frequencies (125 Hz octave band and below), grassy ground reflects sound the same as concrete surfaces. Trees absorb more low frequency sound than grass, but less than ISO 9613-2 suggested.

Interface for barge-in free spoken dialogue system using adaptive sound field control

2004 ◽  
Author(s):  
Tatsunori Asai ◽  
Shigeki Miyabe ◽  
Hiroshi Saruwatari ◽  
Kiyohiro Shikano
Keyword(s):  
Sound Field ◽  
Dialogue System ◽  
Spoken Dialogue ◽  
Spoken Dialogue System ◽  
Field Control

scholarly journals Spiral Sound Wave Transducer Based on the Longitudinal Vibration

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3674 ◽  
Author(s):  
Wei Lu ◽  
Yu Lan ◽  
Rongzhen Guo ◽  
Qicheng Zhang ◽  
Shichang Li ◽  
...  
Keyword(s):  
Sound Wave ◽  
Longitudinal Vibration ◽  
Three Dimensional ◽  
Low Frequency ◽  
Sound Field ◽  
Field Measurements ◽  
Sound Waves ◽  
Underwater Sound ◽  
Three Dimensional Finite Element ◽  
Wave Transducer

A spiral sound wave transducer comprised of longitudinal vibrating elements has been proposed. This transducer was made from eight uniform radial distributed longitudinal vibrating elements, which could effectively generate low frequency underwater acoustic spiral waves. We discuss the production theory of spiral sound waves, which could be synthesized by two orthogonal acoustic dipoles with a phase difference of 90 degrees. The excitation voltage distribution of the transducer for emitting a spiral sound wave and the measurement method for the transducer is given. Three-dimensional finite element modeling (FEM)of the transducer was established for simulating the vibration modes and the acoustic characteristics of the transducers. Further, we fabricated a spiral sound wave transducer based on our design and simulations. It was found that the resonance frequency of the transducer was 10.8 kHz and that the transmitting voltage resonance was 140.5 dB. The underwater sound field measurements demonstrate that our designed transducer based on the longitudinal elements could successfully generate spiral sound waves.

Sign in / Sign up

Export Citation Format

Share Document