A longitudinal shear wave and transverse compressional wave in solids

2014 ◽  
Vol 136 (4) ◽  
pp. 2196-2196
Author(s):  
ali Zorgani ◽  
Stefan Catheline ◽  
Nicolas Benech
Keyword(s):  
Shear Wave ◽  
Longitudinal Shear ◽  
Compressional Wave

Evaluation of direct hydrocarbon indicators through comparison of compressional‐ and shear‐wave seismic data: a case study of the Myrnam gas field, Alberta

Geophysics ◽  
1985 ◽  
Vol 50 (1) ◽  
pp. 37-48 ◽  
Author(s):  
Ross Alan Ensley
Keyword(s):  
Shear Wave ◽  
Seismic Data ◽  
Compressional Wave ◽  
Bright Spot ◽  
Low Velocity ◽  
Gas Reservoir ◽  
Gas Field ◽  
Compressional Waves ◽  
The Relationship

Shear waves differ from compressional waves in that their velocity is not significantly affected by changes in the fluid content of a rock. Because of this relationship, a gas‐related compressional‐wave “bright spot” or direct hydrocarbon indicator will have no comparable shear‐wave anomaly. In contrast, a lithology‐related compressional‐wave anomaly will have a corresponding shear‐wave anomaly. Thus, it is possible to use shear‐wave seismic data to evaluate compressional‐wave direct hydrocarbon indicators. This case study presents data from Myrnam, Alberta which exhibit the relationship between compressional‐ and shear‐wave seismic data over a gas reservoir and a low‐velocity coal.

Sonic logging of compressional‐wave velocities in a very slow formation

Geophysics ◽  
1995 ◽  
Vol 60 (6) ◽  
pp. 1627-1633 ◽  
Author(s):  
Bart W. Tichelaar ◽  
Klaas W. van Luik
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Compressional Wave ◽  
P Wave ◽  
Dipole Source ◽  
Frequency Spectra ◽  
Unconsolidated Sands ◽  
Wave Velocities ◽  
Shear Wave Velocities ◽  
Sonic Logging

Borehole sonic waveforms are commonly acquired to produce logs of subsurface compressional and shear wave velocities. To this purpose, modern borehole sonic tools are usually equipped with various types of acoustic sources, i.e., monopole and dipole sources. While the dipole source has been specifically developed for measuring shear wave velocities, we found that the dipole source has an advantage over the monopole source when determining compressional wave velocities in a very slow formation consisting of unconsolidated sands with a porosity of about 35% and a shear wave velocity of about 465 m/s. In this formation, the recorded compressional refracted waves suffer from interference with another wavefield component identified as a leaky P‐wave, which hampers the determination of compressional wave velocities in the sands. For the dipole source, separation of the compressional refracted wave from the recorded waveforms is accomplished through bandpass filtering since the wavefield components appear as two distinctly separate contributions to the frequency spectrum: a compressional refracted wave centered at a frequency of 6.5 kHz and a leaky P‐wave centered at 1.3 kHz. For the monopole source, the frequency spectra of the various waveform components have considerable overlap. It is therefore not obvious what passband to choose to separate the compressional refracted wave from the monopole waveforms. The compressional wave velocity obtained for the sands from the dipole compressional refracted wave is about 2150 m/s. Phase velocities obtained for the dispersive leaky P‐wave excited by the dipole source range from 1800 m/s at 1.0 kHz to 1630 m/s at 1.6 kHz. It appears that the dipole source has an advantage over the monopole source for the data recorded in this very slow formation when separating the compressional refracted wave from the recorded waveforms to determine formation compressional wave velocities.

FLUID SATURATION EFFECTS ON DYNAMIC ELASTIC PROPERTIES OF SEDIMENTARY ROCKS

Geophysics ◽  
1976 ◽  
Vol 41 (5) ◽  
pp. 895-921 ◽  
Author(s):  
A. R. Gregory
Keyword(s):  
Shear Wave ◽  
Elastic Moduli ◽  
Sedimentary Rocks ◽  
Compressional Wave ◽  
Reflection Coefficients ◽  
High Porosity ◽  
Wave Velocities ◽  
Shear Wave Velocities ◽  
Fluid Saturation ◽  
Saturation Effects

The influence of saturation by water, oil, gas, and mixtures of these fluids on the densities, velocities, reflection coefficients, and elastic moduli of consolidated sedimentary rocks was determined in the laboratory by ultrasonic wave propagation methods. Twenty rock samples varying in age from Pliocene to early Devonian and in porosity from 4 to 41 percent were tested under uniform pressures equivalent to subsurface depths of 0 to 18,690 ft. Fluid saturation effects on compressional‐wave velocity are much larger in low‐porosity than in high‐porosity rocks; this correlation is strengthened by elevated pressures but is absent at atmospheric pressure. At a frequency of 1 MHz, the shear‐wave velocities do not always decrease when liquid pore saturants are added to rocks as theorized by Biot; agreement with theory is dependent upon pressure, porosity, fluid‐mineral chemical interactions, and the presence of microcracks in the cementing material. Experimental results support the belief that lower compressional‐wave velocities and higher reflection coefficients are obtained in sedimentary rocks that contain gas. Replacing pore liquids with gas markedly reduces the elastic moduli of rocks, and the effect is enhanced by decreasing pressure. As a rule, the moduli decrease as the porosity increases; Poisson’s ratio is an exception to the rule. Liquid and gas saturation in consolidated rocks can also be distinguished by the ratio of compressional and shear wave velocities [Formula: see text]. The potential diagnostic value of elastic moduli in seismic exploration may stimulate interest in the use of shear‐wave reflection methods in the field.

Sign in / Sign up

Export Citation Format

Share Document