A rigid-body model for diffraction imaging of solid objects: Theory and experimental results

2014 ◽  
Vol 135 (4) ◽  
pp. 2360-2360
Author(s):  
Edward H. Pees
Keyword(s):  
Rigid Body ◽  
Experimental Results ◽  
Body Model ◽  
Solid Objects ◽  
Rigid Body Model ◽  
Diffraction Imaging

A Fully Compliant Constant Velocity Universal Joint

2015 ◽  
Author(s):  
D. Farhadi Machekposhti ◽  
N. Tolou ◽  
J. L. Herder
Keyword(s):  
Rigid Body ◽  
Rotational Motion ◽  
Constant Velocity ◽  
Large Deflection ◽  
Experimental Results ◽  
Universal Joint ◽  
Compliant Structure ◽  
Body Model ◽  
Rigid Body Model ◽  
Kinematic Properties

This paper presents the concept and fabrication of a large deflection compliant Constant Velocity universal joint (CV joint). A novel compliant structure is proposed based on the 6R Hybrid spatial overconstrained linkage. Due to symmetry, its kinematic properties are such that can transfer rotational motion between two angled shafts with true constant velocity. The kinematic of the mechanism and the Pseudo-Rigid-Body model of its compliant configuration are studied and analyzed. A prototype was manufactured and experimentally evaluated. It was verified that the experimental results are consistent with the theoretical expectations.

Dynamic Response of Compliant Mechanisms Using the Pseudo-Rigid-Body Model

1997 ◽  
Author(s):  
Scott M. Lyon ◽  
Mark S. Evans ◽  
Paul A. Erickson ◽  
Larry L. Howell
Keyword(s):  
Dynamic Response ◽  
Rigid Body ◽  
Nonlinear Analysis ◽  
Natural Frequencies ◽  
Compliant Mechanisms ◽  
Experimental Results ◽  
Body Model ◽  
Straight Line ◽  
Model Predictions ◽  
Rigid Body Model

Abstract The pseudo-rigid-body modeling technique is used to simplify the nonlinear analysis of compliant mechanisms. This paper presents the first work that investigates the possibility of using the pseudo-rigid-body model to predict the dynamic response of compliant mechanisms. Four different configurations of the parallel-guiding mechanism are modeled and tested, as well as two configurations of compliant straight-line mechanisms. The model predictions of the first natural frequencies were compared with experimental results for all six mechanism configurations. The model predictions are within 9% of the experimental results for all cases.

Prediction of the First Modal Frequency of Compliant Mechanisms Using the Pseudo-Rigid-Body Model

1999 ◽  
Vol 121 (2) ◽  
pp. 309-313 ◽  
Author(s):  
S. M. Lyon ◽  
P. A. Erickson ◽  
M. S. Evans ◽  
L. L. Howell
Keyword(s):  
Rigid Body ◽  
Natural Frequencies ◽  
Compliant Mechanisms ◽  
Experimental Results ◽  
Modal Frequency ◽  
Body Model ◽  
Modal Response ◽  
Straight Line ◽  
Model Predictions ◽  
Rigid Body Model

The pseudo-rigid-body modeling technique is used to simplify the nonlinear analysis of compliant mechanisms. This paper presents the first work that investigates the possibility of using the pseudo-rigid-body model to predict the first modal response of compliant mechanisms. Four different configurations of the parallel-guiding mechanism are modeled and tested, as well as two configurations of compliant straight-line mechanisms. The model predictions of the first natural frequencies were compared with experimental results for all six mechanism configurations. The model predictions are within 9 percent of the experimental results for all cases.

A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments

1998 ◽  
Vol 120 (3) ◽  
pp. 392-400 ◽  
Author(s):  
A. Saxena ◽  
S. N. Kramer
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Elliptic Integral ◽  
Beam Equation ◽  
Large Deflections ◽  
Euler Beam ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads. Because of this fact, traditional methods of deflection analysis do not apply. Since the nonlinearities introduced by these large deflections make the system comprising such members difficult to solve, parametric deflection approximations are deemed helpful in the analysis and synthesis of compliant mechanisms. This is accomplished by representing the compliant mechanism as a pseudo-rigid-body model. A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms. In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads. A numerical integration technique using quadrature formulae has been employed to solve the large deflection Bernoulli-Euler beam equation for the tip deflection. Implementation of this scheme is simpler than the elliptic integral formulation and provides very accurate results. An example for the synthesis of a compliant mechanism using the proposed model is also presented.

A Simple and Accurate Method for Determining Large Deflections in Complaint Mechanisms Subjected to End Forces and Moments

1998 ◽  
Author(s):  
A. Saxena ◽  
Steven N. Kramer
Keyword(s):  
Rigid Body ◽  
Numerical Integration ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Beam Equation ◽  
Integration Scheme ◽  
Large Deflections ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Abstract Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads for which, traditional methods of deflection analysis do not apply Nonlinearities introduced by these large deflections make the system comprising such members difficult to solve Parametric deflection approximations are then deemed helpful in the analysis and synthesis of compliant mechanisms This is accomplished by seeking the pseudo-rigid-body model representation of the compliant mechanism A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads with positive end moments A numerical integration technique using quadrature formulae has been employed to solve the nonlinear Bernoulli-Euler beam equation for the tip deflection Implementation of this scheme is relatively simpler than the elliptic integral formulation and provides nearly accurate results Results of the numerical integration scheme are compared with the beam finite element analysis An example for the synthesis of a compliant mechanism using the proposed model is also presented.

Evaluation of Equivalent Spring Stiffness for Use in a Pseudo-Rigid-Body Model of Large-Deflection Compliant Mechanisms

1994 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Spring Stiffness ◽  
Model Concept ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Body Joints

Abstract Compliant mechanisms gain some or all of their mobility from the flexibility of their members rather than from rigid-body joints only. More efficient and usable analysis and design techniques are needed before the advantages of compliant mechanisms can be fully utilized. In an earlier work, a pseudo-rigid-body model concept, corresponding to an end-loaded geometrically nonlinear, large-deflection beam, was developed to help fulfill this need. In this paper, the pseudo-rigid-body equivalent spring stiffness is investigated and new modeling equations are proposed. The result is a simplified method of modeling the force/deflection relationships of large-deflection members in compliant mechanisms. Flexible segments which maintain a constant end angle are discussed, and an example mechanism is analyzed. The resulting models are valuable in the visualization of the motion of large-deflection systems, as well as the quick and efficient evaluation and optimization of compliant mechanism designs.

Parametric Deflection Approximations for Initially Curved, Large-Deflection Beams in Compliant Mechanisms

1996 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Curved Beam ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Fundamental Type ◽  
Applied Forces ◽  
Flexible Member

Abstract The analysis of systems containing highly flexible members is made difficult by the nonlineararities caused by large deflections of the flexible members. The analysis and design of many such systems may be simplified by using pseudo-rigid-body approximations in modeling the flexible members. The pseudo-rigid-body model represents flexible members as rigid links, joined at pin joints with torsional springs. Appropriate values for link lengths and torsional spring stiffnesses are determined such that the deflection path and force-deflection relationships are modeled accurately. Pseudo-rigid-body approximations have been developed for initially straight beams with externally applied forces at the beam end. This work develops approximations for another fundamental type of flexible member, the initially curved beam with applied force at the beam end. This type of flexible member is commonly used in compliant mechanisms. An example of the use of the resulting pseudo-rigid-body approximations in compliant mechanisms is included.

Compliant Pantographs via the Pseudo-Rigid-Body Model

1998 ◽  
Author(s):  
Andrew J. Nielson ◽  
Larry L. Howell
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Test Results ◽  
Rigid Link ◽  
Body Model ◽  
Design Flexibility ◽  
Model Predictions ◽  
Rigid Body Model ◽  
Classical Mechanism

Abstract This paper uses a familiar classical mechanism, the pantograph, to demonstrate the utility of the pseudo-rigid-body model in the design of compliant mechanisms to replace rigid-link mechanisms, and to illustrate the advantages and limitations of the resulting compliant mechanisms. To demonstrate the increase in design flexibility, three different compliant mechanism configurations were developed for a single corresponding rigid-link mechanism. The rigid-link pantograph consisted of six links and seven joints, while the corresponding compliant mechanisms had no more than two links and three joints (a reduction of at least four links and four joints). A fourth compliant pantograph, corresponding to a rhomboid pantograph, was also designed and tested. The test results showed that the pseudo-rigid-body model predictions were accurate over a large range, and the mechanisms had displacement characteristics of rigid-link mechanisms in that range. The limitations of the compliant mechanisms included reduced range compared to their rigid-link counterparts. Also, the force-deflection characteristics were predicted by the pseudo-rigid-body model, but they did not resemble those for a rigid-link pantograph because of the energy storage in the flexible segments.

Sign in / Sign up

Export Citation Format

Share Document