Dynamic characterization of viscoelastic porous foams used in vehicles based on an inverse finite element method

2014 ◽  
Vol 135 (4) ◽  
pp. 1834-1843 ◽  
Author(s):  
Svante Finnveden ◽  
Nils-Erik Hörlin ◽  
Mathias Barbagallo
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Dynamic Characterization ◽  
Inverse Finite Element Method ◽  
Element Method

scholarly journals Shape Sensing of a Complex Aeronautical Structure with Inverse Finite Element Method

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1388
Author(s):  
Daniele Oboe ◽  
Luca Colombo ◽  
Claudio Sbarufatti ◽  
Marco Giglio
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Boundary Conditions ◽  
Strain Field ◽  
Element Analysis ◽  
Inverse Finite Element Method ◽  
Shape Sensing ◽  
Definition Of ◽  
High Level ◽  
Element Method

The inverse Finite Element Method (iFEM) is receiving more attention for shape sensing due to its independence from the material properties and the external load. However, a proper definition of the model geometry with its boundary conditions is required, together with the acquisition of the structure’s strain field with optimized sensor networks. The iFEM model definition is not trivial in the case of complex structures, in particular, if sensors are not applied on the whole structure allowing just a partial definition of the input strain field. To overcome this issue, this research proposes a simplified iFEM model in which the geometrical complexity is reduced and boundary conditions are tuned with the superimposition of the effects to behave as the real structure. The procedure is assessed for a complex aeronautical structure, where the reference displacement field is first computed in a numerical framework with input strains coming from a direct finite element analysis, confirming the effectiveness of the iFEM based on a simplified geometry. Finally, the model is fed with experimentally acquired strain measurements and the performance of the method is assessed in presence of a high level of uncertainty.

scholarly journals Structural Damage Identification Based on Integrated Utilization of Inverse Finite Element Method and Pseudo-Excitation Approach

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 606
Author(s):  
Tengteng Li ◽  
Maosen Cao ◽  
Jianle Li ◽  
Lei Yang ◽  
Hao Xu ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Structural Damage ◽  
Damage Identification ◽  
Displacement Measurement ◽  
Engineering Practice ◽  
Position Measurement ◽  
Inverse Finite Element Method ◽  
Pseudo Excitation ◽  
Element Method

The attempt to integrate the applications of conventional structural deformation reconstruction strategies and vibration-based damage identification methods is made in this study, where, more specifically, the inverse finite element method (iFEM) and pseudo-excitation approach (PE) are combined for the first time, to give rise to a novel structural health monitoring (SHM) framework showing various advantages, particularly in aspects of enhanced adaptability and robustness. As the key component of the method, the inverse finite element method (iFEM) enables precise reconstruction of vibration displacements based on measured dynamic strains, which, as compared to displacement measurement, is much more adaptable to existing on-board SHM systems in engineering practice. The PE, on the other hand, is applied subsequently, relying on the reconstructed displacements for the identification of structural damage. Delamination zones in a carbon fibre reinforced plastic (CFRP) laminate are identified using the developed method. As demonstrated by the damage detection results, the iFEM-PE method possesses apparently improved accuracy and significantly enhanced noise immunity compared to the original PE approach depending on displacement measurement. Extensive parametric study is conducted to discuss the influence of a variety of factors on the effectiveness and accuracy of damage identification, including the influence of damage size and position, measurement density, sensor layout, vibration frequency and noise level. It is found that different factors are highly correlated and thus should be considered comprehensively to achieve optimal detection results. The application of the iFEM-PE method is extended to better adapt to the structural operational state, where multiple groups of vibration responses within a wide frequency band are used. Hybrid data fusion is applied to process the damage index (DI) constructed based on the multiple responses, leading to detection results capable of indicating delamination positions precisely.

Acoustic Characterization of Inhomogenous Layers using Finite Element Method

2021 ◽  
Author(s):  
Per Kristian Bolstad ◽  
Tung Manh ◽  
Martijn Frijlink ◽  
Lars Hoff
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Acoustic Characterization ◽  
Element Method

A Sub-Domain Inverse Finite Element Characterization of Hyperelastic Membranes Including Soft Tissues

2003 ◽  
Vol 125 (3) ◽  
pp. 363-371 ◽  
Author(s):  
Padmanabhan Seshaiyer ◽  
Jay D. Humphrey
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Soft Tissues ◽  
Nonlinear Behavior ◽  
Local Stress ◽  
Biological Tissues ◽  
Material Behavior ◽  
Inverse Finite Element Method ◽  
Complicated Geometry ◽  
Element Method

Quantification of the mechanical behavior of hyperelastic membranes in their service configuration, particularly biological tissues, is often challenging because of the complicated geometry, material heterogeneity, and nonlinear behavior under finite strains. Parameter estimation thus requires sophisticated techniques like the inverse finite element method. These techniques can also become difficult to apply, however, if the domain and boundary conditions are complex (e.g. a non-axisymmetric aneurysm). Quantification can alternatively be achieved by applying the inverse finite element method over sub-domains rather than the entire domain. The advantage of this technique, which is consistent with standard experimental practice, is that one can assume homogeneity of the material behavior as well as of the local stress and strain fields. In this paper, we develop a sub-domain inverse finite element method for characterizing the material properties of inflated hyperelastic membranes, including soft tissues. We illustrate the performance of this method for three different classes of materials: neo-Hookean, Mooney Rivlin, and Fung-exponential.

Sign in / Sign up

Export Citation Format

Share Document