Establishing the admissible waves and the steady state response of a rib-stiffened, layered plate structure subjected to high frequency acoustic loading

2013 ◽  
Vol 134 (5) ◽  
pp. 4013-4013
Author(s):  
Kirubel Teferra ◽  
Jeffrey Cipolla
Keyword(s):  
Steady State ◽  
High Frequency ◽  
Steady State Response ◽  
Layered Plate ◽  
Plate Structure ◽  
State Response

A Loading Correction Scheme for a Structure-Dependent Integration Method

2016 ◽  
Vol 12 (1) ◽  
Author(s):  
Shuenn-Yih Chang
Keyword(s):  
Steady State ◽  
High Frequency ◽  
Truncation Error ◽  
Integration Method ◽  
Frequency Mode ◽  
Local Truncation Error ◽  
Steady State Response ◽  
High Frequency Mode ◽  
State Response ◽  
Correction Scheme

A structure-dependent integration method may experience an unusual overshooting behavior in the steady-state response of a high frequency mode. In order to explore this unusual overshooting behavior, a local truncation error is established from a forced vibration response rather than a free vibration response. As a result, this local truncation error can reveal the root cause of the inaccurate integration of the steady-state response of a high frequency mode. In addition, it generates a loading correction scheme to overcome this unusual overshooting behavior by means of the adjustment the difference equation for displacement. Apparently, these analytical results are applicable to a general structure-dependent integration method.

Assessments of Structure-Dependent Integration Methods with Explicit Displacement and Velocity Difference Equations

2017 ◽  
Vol 34 (6) ◽  
pp. 771-778 ◽  
Author(s):  
S. Y. Chang ◽  
T. H. Wu
Keyword(s):  
Steady State ◽  
High Frequency ◽  
Initial Conditions ◽  
Time Integration ◽  
Steady State Response ◽  
Integration Methods ◽  
Practical Applications ◽  
High Frequency Response ◽  
State Response ◽  
Structural Nonlinearity

AbstractA family of structure-dependent integration methods has been proposed by Gui et al. for time integration. Although it has desirable numerical properties, such as unconditional stability, explicit formulation and second-order accuracy, it has some adverse properties, such as a poor capability to capture structural nonlinearity, an overshoot in a high frequency steady- state response and a weak instability in the high frequency response of nonzero initial conditions. The causes of these adverse properties are explored. A poor capability to capture structural nonlinearity may originate from the convergence rate of 1 in velocity error. This family method has an overshoot in a high frequency steady-state response and this overshoot can be eliminated by adding a load-dependent term into the displacement difference equation. It is also analytically verified that the family method generally has no weak instability. However, the special member with λ = 4, i.e., CR explicit method, is shown to have a weak instability. Thus, it must be prohibited from practical applications although many applications of this method were found in the literature.

The Auditory Steady-State Response: Full-Term and Premature Neonates

2002 ◽  
Vol 13 (05) ◽  
pp. 260-269 ◽  
Author(s):  
Barbara Cone-Wesson ◽  
John Parker ◽  
Nina Swiderski ◽  
Field Rickards
Keyword(s):  
Steady State ◽  
Premature Infants ◽  
Modulation Frequency ◽  
Otoacoustic Emission ◽  
Full Term ◽  
Steady State Response ◽  
Pass Rates ◽  
Term Infants ◽  
State Response ◽  
Auditory Steady State Response

Two studies were aimed at developing the auditory steady-state response (ASSR) for universal newborn hearing screening. First, neonates who had passed auditory brainstem response, transient evoked otoacoustic emission, and distortion-product otoacoustic emission tests were also tested with ASSRs using modulated tones that varied in frequency and level. Pass rates were highest (> 90%) for amplitude-modulated tones presented at levels ≥ 69 dB SPL. The effect of modulation frequency on ASSR for 500- and 2000-Hz tones was evaluated in full-term and premature infants in the second study. Full-term infants had higher pass rates for 2000-Hz tones amplitude modulated at 74 to 106 Hz compared with pass rates for a 500-Hz tone modulated at 58 to 90 Hz. Premature infants had lower pass rates than full-term infants for both carrier frequencies. Systematic investigation of ASSR threshold and the effect of modulation frequency in neonates is needed to adapt the technique for screening.

scholarly journals Steady State Response of Linear Time Invariant Systems Modeledby Multibond Graphs

2021 ◽  
Vol 11 (4) ◽  
pp. 1717
Author(s):  
Gilberto Gonzalez Avalos ◽  
Noe Barrera Gallegos ◽  
Gerardo Ayala-Jaimes ◽  
Aaron Padilla Garcia
Keyword(s):  
Steady State ◽  
Linear Time ◽  
Direct Determination ◽  
The State ◽  
Steady State Response ◽  
State Variables ◽  
Linear Time Invariant ◽  
State Response ◽  
Time Invariant

The direct determination of the steady state response for linear time invariant (LTI) systems modeled by multibond graphs is presented. Firstly, a multiport junction structure of a multibond graph in an integral causality assignment (MBGI) to get the state space of the system is introduced. By assigning a derivative causality to the multiport storage elements, the multibond graph in a derivative causality (MBGD) is proposed. Based on this MBGD, a theorem to obtain the steady state response is presented. Two case studies to get the steady state of the state variables are applied. Both cases are modeled by multibond graphs, and the symbolic determination of the steady state is obtained. The simulation results using the 20-SIM software are numerically verified.

Sign in / Sign up

Export Citation Format

Share Document