scholarly journals Intrinsic characterisation of structure-borne sound sources and isolators from in-situ measurements.

2013 ◽  
Author(s):  
Andy Moorhouse ◽  
Andrew S. Elliot ◽  
YongHwa Heo
Keyword(s):  
In Situ Measurements ◽  
Sound Sources

Comparison of different in situ measurements techniques of intelligibility in an open-plan office

2018 ◽  
Vol 25 (2) ◽  
pp. 111-122 ◽  
Author(s):  
Dario D’Orazio ◽  
Elena Rossi ◽  
Massimo Garai
Keyword(s):  
Direct Method ◽  
Measurement Techniques ◽  
Background Level ◽  
In Situ Measurements ◽  
Sound Sources ◽  
Transmission Index ◽  
Acoustic Comfort ◽  
Open Plan

Acoustic comfort in open-plan offices is a relatively recent research topic and some practices have not yet been consolidated. The goal in these spaces is to achieve good speech privacy at every workstation, reaching a high value of spatial decay of the sound pressure level. In case of refurbishment, a proper measurement of intelligibility criteria is needed, for example, in order to properly calibrate a numerical model or to plan acoustic treatments. This work compares different measurement techniques to evaluate the spatial distribution of intelligibility criteria. In situ measurements were done in an open-plan office used as a case study. Both omnidirectional and directional sound sources with different sound power levels were used, according, respectively, to ISO 3382-3:2012 and ITU-T P.51:1996. Furthermore, compensation algorithms were used in impulse response measurements in presence of Heating, Ventilation and Air Conditioning noise. The study shows, in a preliminary way, how different techniques and equipment can influence intelligibility criteria used in the open-plan office characterization. Results show that the indirect method of measuring Speech Transmission Index could not be used when the background level is high as the case study while the direct method returns good results.

The Carbon:²³⁴Thorium ratios of sinking particles in the California Current Ecosystem 2: Examination of a thorium sorption, desorption, and particle transport model

2019 ◽  
Author(s):  
Michael Stukel ◽  
Thomas Kelly
Keyword(s):  
Organic Carbon ◽  
Water Column ◽  
Particulate Organic Carbon ◽  
Transport Model ◽  
California Current ◽  
In Situ Measurements ◽  
Power Law Distribution ◽  
Sinking Particles ◽  
Organic Carbon Concentration

Thorium-234 (234Th) is a powerful tracer of particle dynamics and the biological pump in the surface ocean; however, variability in carbon:thorium ratios of sinking particles adds substantial uncertainty to estimates of organic carbon export. We coupled a mechanistic thorium sorption and desorption model to a one-dimensional particle sinking model that uses realistic particle settling velocity spectra. The model generates estimates of 238U-234Th disequilibrium, particulate organic carbon concentration, and the C:234Th ratio of sinking particles, which are then compared to in situ measurements from quasi-Lagrangian studies conducted on six cruises in the California Current Ecosystem. Broad patterns observed in in situ measurements, including decreasing C:234Th ratios with depth and a strong correlation between sinking C:234Th and the ratio of vertically-integrated particulate organic carbon (POC) to vertically-integrated total water column 234Th, were accurately recovered by models assuming either a power law distribution of sinking speeds or a double log normal distribution of sinking speeds. Simulations suggested that the observed decrease in C:234Th with depth may be driven by preferential remineralization of carbon by particle-attached microbes. However, an alternate model structure featuring complete consumption and/or disaggregation of particles by mesozooplankton (e.g. no preferential remineralization of carbon) was also able to simulate decreasing C:234Th with depth (although the decrease was weaker), driven by 234Th adsorption onto slowly sinking particles. Model results also suggest that during bloom decays C:234Th ratios of sinking particles should be higher than expected (based on contemporaneous water column POC), because high settling velocities minimize carbon remineralization during sinking.

Evaluation of reanalysis and satellite-based sea surface winds using in situ measurements from Chinese Antarctic Expeditions

2013 ◽  
Vol 24 (3) ◽  
pp. 147
Author(s):  
Ming LI ◽  
Qinghua YANG ◽  
Jiechen ZHAO ◽  
Lin ZHANG ◽  
Chunhua LI ◽  
...  
Keyword(s):  
In Situ Measurements ◽  
Sea Surface ◽  
Surface Winds ◽  
Sea Surface Winds

The effects of surcharged manholes on the travel time and dispersion of solutes in sewer systems

1995 ◽  
Vol 31 (7) ◽  
pp. 51-59 ◽  
Author(s):  
Ian Guymer ◽  
Rob O'Brien
Keyword(s):  
Travel Time ◽  
Moment Method ◽  
In Situ Measurements ◽  
Time Change ◽  
Longitudinal Dispersion ◽  
Laboratory System ◽  
Environmental Load ◽  
Hydraulic Characteristics ◽  
Sewer Systems

Previously, the design of sewer systems has been limited to studies of their hydraulic characteristics, in particular the ability of the system to convey the maximum discharge. Greater environmental awareness has necessitated that new designs, and some existing schemes, are assessed to determine the environmental load which the scheme will deliver to any downstream component. This paper describes a laboratory programme which has been designed to elucidate the effects of manholes on the longitudinal dispersion of solutes. A laboratory system is described, which allows in situ measurements to be taken of the concentration of a fluorescent solute tracer, both up- and down-stream of a surcharged manhole junction. Results are presented from a preliminary series of studies undertaken for a single manhole geometry over a range of discharges, with varying levels of surcharge. Results are presented showing the variation of travel time, change in second moment of the distribution and of a dispersion factor with surcharge, assuming a Taylor approach and determining the dispersion factor using a ‘change in moment’ method. The effect of the stored volume within the manhole is clearly evident. The limitations and the applicability of this approach are discussed.

scholarly journals Development of the Statistical Model for Monitoring Salinization in the Mekong Delta of Vietnam Using Remote Sensing Data and In-Situ Measurements

Proceedings ◽  
2018 ◽  
Vol 2 (10) ◽  
pp. 565
Author(s):  
Nguyen Nguyen Vu ◽  
Le Van Trung ◽  
Tran Thi Van
Keyword(s):  
Statistical Model ◽  
Mekong Delta ◽  
Remote Sensing Data ◽  
Principal Component ◽  
Measured Data ◽  
In Situ Measurements ◽  
Landsat 8 ◽  
Spectral Bands ◽  
Component Band

This article presents the methodology for developing a statistical model for monitoring salinity intrusion in the Mekong Delta based on the integration of satellite imagery and in-situ measurements. We used Landsat-8 Operational Land Imager and Thermal Infrared Sensor (Landsat- 8 OLI and TIRS) satellite data to establish the relationship between the planetary reflectance and the ground measured data in the dry season during 2014. The three spectral bands (blue, green, red) and the principal component band were used to obtain the most suitable models. The selected model showed a good correlation with the exponential function of the principal component band and the ground measured data (R2 > 0.8). Simulation of the salinity distribution along the river shows the intrusion of a 4 g/L salt boundary from the estuary to the inner field of more than 50 km. The developed model will be an active contribution, providing managers with adaptation and response solutions suitable for intrusion in the estuary as well as the inner field of the Mekong Delta.

Sign in / Sign up

Export Citation Format

Share Document