Investigation of the impact of water column variability on acoustic inversions in a shallow water ocean.

2009 ◽  
Vol 125 (4) ◽  
pp. 2510-2510
Author(s):  
Ying‐Tsong Lin ◽  
James F. Lynch ◽  
Timothy F. Duda
Keyword(s):  
Shallow Water ◽  
Water Column ◽  
The Impact

scholarly journals Computational Evaluation of Shock Wave Interaction with a Cylindrical Water Column

2021 ◽  
Vol 11 (11) ◽  
pp. 4934
Author(s):  
Viola Rossano ◽  
Giuliano De Stefano
Keyword(s):  
Shock Wave ◽  
Water Column ◽  
Wave Interaction ◽  
Navier Stokes ◽  
Plane Shock ◽  
Governing Equations ◽  
Computational Evaluation ◽  
Air Water Interface ◽  
The Mean ◽  
The Impact

Computational fluid dynamics was employed to predict the early stages of the aerodynamic breakup of a cylindrical water column, due to the impact of a traveling plane shock wave. The unsteady Reynolds-averaged Navier–Stokes approach was used to simulate the mean turbulent flow in a virtual shock tube device. The compressible flow governing equations were solved by means of a finite volume-based numerical method, where the volume of fluid technique was employed to track the air–water interface on the fixed numerical mesh. The present computational modeling approach for industrial gas dynamics applications was verified by making a comparison with reference experimental and numerical results for the same flow configuration. The engineering analysis of the shock–column interaction was performed in the shear-stripping regime, where an acceptably accurate prediction of the interface deformation was achieved. Both column flattening and sheet shearing at the column equator were correctly reproduced, along with the water body drift.

scholarly journals Paleoenvironment of the Lower–Middle Cambrian Evaporite Series in the Tarim Basin and Its Impact on the Organic Matter Enrichment of Shallow Water Source Rocks

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 659
Author(s):  
Mingyang Wei ◽  
Zhidong Bao ◽  
Axel Munnecke ◽  
Wei Liu ◽  
G. William M. Harrison ◽  
...  
Keyword(s):  
Organic Matter ◽  
Shallow Water ◽  
Tarim Basin ◽  
Water Environment ◽  
Water Source ◽  
Major Elements ◽  
Source Rocks ◽  
Middle Cambrian ◽  
Sedimentary Environments ◽  
The Impact

Just as in deep-water sedimentary environments, productive source rocks can be developed in an evaporitic platform, where claystones are interbedded with evaporites and carbonates. However, the impact of the paleoenvironment on the organic matter enrichment of shallow water source rocks in an evaporite series has not been well explored. In this study, two wells in the central uplift of the Tarim Basin were systematically sampled and analyzed for a basic geochemical study, including major elements, trace elements, and total organic carbon (TOC), to understand the relationship between TOC and the paleoenvironmental parameters, such as paleosalinity, redox, paleoclimate, paleo-seawater depth, and paleoproductivity. The results show that the Lower–Middle Cambrian mainly developed in a fluctuating salinity, weak anoxic to anoxic, continuous dry and hot, and proper shallow water environment. The interfingering section of evaporites, carbonates, and claystones of the Awatag Fm. have higher paleoproductivity and higher enrichment of organic matter. Paleosalinity, redox, paleoclimate, paleo-seawater depth, and paleoproductivity jointly control the organic matter enrichment of shallow water source rocks in the evaporite series. The degree of enrichment of organic matter in shallow water source rocks first increases and then decreases with the increase in paleosalinity. All the samples with high content of organic matter come from the shallower environment of the Awatag Fm.

Biogeochemical and ecological features of sinking particulate matter in the deep Ionian Sea (E. Mediterranean) during a 10-year time series study: impacts of atmospheric and oceanographic variabilities on carbon production and sequestration

2021 ◽  
Author(s):  
Alexandra Gogou ◽  
Constantine Parinos ◽  
Spyros Stavrakakis ◽  
Emmanouil Proestakis ◽  
Maria Kanakidou ◽  
...  
Keyword(s):  
Particulate Matter ◽  
Organic Carbon ◽  
Carbon Cycle ◽  
Atmospheric Deposition ◽  
Water Column ◽  
Particulate Organic Carbon ◽  
Nutrient Dynamics ◽  
Ionian Sea ◽  
Ecological Features ◽  
The Impact

<p>Biotic and abiotic processes that form, alter, transport, and remineralize particulate organic carbon, silicon, calcium carbonate, and other minor and trace chemical species in the water column are central to the ocean’s ecological and biogeochemical functioning and of fundamental importance to the ocean carbon cycle. Sinking particulate matter is the major vehicle for exporting carbon from the sea surface to the deep sea. During its transit towards the sea floor, most particulate organic carbon (POC) is returned to inorganic form and redistributed in the water column. This redistribution determines the surface concentration of dissolved CO<sub>2</sub>, and hence the rate at which the ocean can absorb CO<sub>2</sub> from the atmosphere. The ability to predict quantitatively the depth profile of remineralization is therefore critical to deciphering the response of the global carbon cycle to natural and human-induced changes.</p><p>Aiming to investigate the significant biogeochemical and ecological features and provide new insights on the sources and cycles of sinking particulate matter, a mooring line of five sediment traps was deployed from 2006 to 2015 (with some gap periods) at 5 successive water column depths (700, 1200, 2000, 3200 and 4300 m) in the SE Ionian Sea, northeastern Mediterranean (‘NESTOR’ site). We have examined the long-term records of downward fluxes for Corg, N<sub>tot</sub>, δ<sup>13</sup>Corg and δ<sup>15</sup>N<sub>tot</sub>, along with the associated ballast minerals (opal, lithogenics and CaCO<sub>3</sub>), lipid biomarkers, Chl-a and PP rates, phytoplankton composition, nutrient dynamics and atmospheric deposition.  </p><p>The satellite-derived seasonal and interannual variability of phytoplankton metrics (biomass and phenology) and atmospheric deposition (meteorology and air masses origin) was examined for the period of the sediment trap experiment. Regarding the atmospheric deposition, synergistic opportunities using Earth Observation satellite lidar and radiometer systems are proposed (e.g. Cloud‐Aerosol Lidar with Orthogonal Polarization - CALIOP, Moderate Resolution Imaging Spectroradiometer - MODIS), aiming towards a four‐dimensional exploitation of atmospheric aerosol loading (e.g. Dust Optical Depth) in the study area.</p><p>Our main goals are to: i) develop a comprehensive knowledge of carbon fluxes and associated mineral ballast fluxes from the epipelagic to the mesopelagic and bathypelagic layers, ii) elucidate the mechanisms governing marine productivity and carbon export and sequestration to depth and iii) shed light on the impact of atmospheric forcing and deposition in respect to regional and large scale circulation patterns and climate variability and the prevailing oceanographic processes (internal variability).</p><p>Acknowledgments</p><p>We acknowledge support of this work by the Action ‘National Network on Climate Change and its Impacts – <strong>CLIMPACT</strong>’, funded by the Public Investment Program of Greece (GSRT, Ministry of Development and Investments).</p>

scholarly journals The mass impacts on chemosynthetic primary producers: potential implications on anammox communities and their consequences

2018 ◽  
Vol 18 (05) ◽  
pp. 440-444
Author(s):  
Noel Pérez ◽  
Jorge Luis Velazco-Vargas ◽  
Osmel Martin ◽  
Rolando Cardenas ◽  
Jesús Martínez-Frías
Keyword(s):  
Water Column ◽  
Deposition Rate ◽  
Extreme Case ◽  
Chemical Compounds ◽  
Global Scale ◽  
Biogeochemical Cycle ◽  
Potential Influence ◽  
Asteroid Impact ◽  
Global Cooling ◽  
The Impact

AbstractThe potential of a mass asteroid impact on Earth to disturb the chemosynthetic communities at global scale is discussed. Special emphasis is made on the potential influence on anammox communities and their implications in the nitrogen biogeochemical cycle. According to our preliminary estimates, anammox communities could be seriously affected as a consequence of global cooling and the large process of acidification usually associated with the occurrence of this kind of event. The scale of affectations could vary in a scenario like the Chicxulub as a function of the amount of soot, depth of the water column and the deposition rate for sulphates assumed in each case. The most severe affectations take place where the amount of soot and sulphates produced during the event is higher and the scale of time of settlements for sulphates is short, of the order of 10 h. In this extreme case, the activity of anammox is considerably reduced, a condition that may persist for several years after the impact. Furthermore, the impact of high levels of other chemical compounds like sulphates and nitrates associated with the occurrence of this kind of event are also discussed.

scholarly journals Measuring the Impact of Observations on the Predictability of the Kuroshio Extension in a Shallow-Water Model

2012 ◽  
Vol 42 (1) ◽  
pp. 3-17 ◽  
Author(s):  
Werner Kramer ◽  
Henk A. Dijkstra ◽  
Stefano Pierini ◽  
Peter Jan van Leeuwen
Keyword(s):  
Shallow Water ◽  
Particle Filtering ◽  
Predictive Power ◽  
Kuroshio Extension ◽  
Water Model ◽  
Ensemble Prediction ◽  
Shallow Water Model ◽  
One Year ◽  
The Impact ◽  
The Kuroshio

Abstract In this paper, sequential importance sampling is used to assess the impact of observations on an ensemble prediction for the decadal path transitions of the Kuroshio Extension. This particle-filtering approach gives access to the probability density of the state vector, which allows the predictive power—an entropy-based measure—of the ensemble prediction to be determined. The proposed setup makes use of an ensemble that, at each time, samples the climatological probability distribution. Then, in a postprocessing step, the impact of different sets of observations is measured by the increase in predictive power of the ensemble over the climatological signal during one year. The method is applied in an identical-twin experiment for the Kuroshio Extension using a reduced-gravity shallow-water model. This study investigates the impact of assimilating velocity observations from different locations during the elongated and the contracted meandering states of the Kuroshio Extension. Optimal observation locations correspond to regions with strong potential vorticity gradients. For the elongated state the optimal location is in the first meander of the Kuroshio Extension. During the contracted state it is located south of Japan, where the Kuroshio separates from the coast.

Uncertainty in Wave Basin Testing of a Fixed Oscillating Water Column Wave Energy Converter

2021 ◽  
Author(s):  
Frances M. Judge ◽  
Eoin Lyden ◽  
Michael O'Shea ◽  
Brian Flannery ◽  
Jimmy Murphy
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Width Ratio ◽  
Oscillating Water Column ◽  
Energy Converter ◽  
The Monte Carlo Method ◽  
Wave Basin ◽  
Measurement Location ◽  
The Impact

Abstract This research presents a methodology for carrying out uncertainty analysis on measurements made during wave basin testing of an oscillating water column wave energy converter. Values are determined for Type A and Type B uncertainty for each parameter of interest, and uncertainty is propagated using the Monte Carlo method to obtain an overall Expanded Uncertainty with a 95% confidence level associated with the Capture Width Ratio of the device. An analysis into the impact of reflections on the experimental results reveals the importance of identifying the incident and combined wave field at each measurement location used to determine device performance, in order to avoid misleading results.

Overcoming the challenges of a shallow-water sparse wide-azimuth survey to improve deep reservoir imaging in the East China Sea

2019 ◽  
Vol 38 (8) ◽  
pp. 610-616
Author(s):  
Yun Wei ◽  
Hua Chen ◽  
Senqing Hu ◽  
Peipei Deng ◽  
Yongdeng Xiao ◽  
...  
Keyword(s):  
Shallow Water ◽  
East China Sea ◽  
Three Dimensional ◽  
Water Layer ◽  
Velocity Model ◽  
East China ◽  
The East China Sea ◽  
China Sea ◽  
Well Data ◽  
The Impact

A new broadband wide-azimuth towed-streamer (WATS) survey was acquired to better resolve reservoir compartments in a shallow-water region of the East China Sea. To offset the shortcomings of narrow-azimuth acquisition along the strike direction, two vessels were added side-by-side as additional source vessels to form the WATS acquisition geometry for this survey. This WATS acquisition was much sparser than typical WATS surveys used in deepwater environments due to its one-sided configuration. The combination of sparse acquisition, shallow water, and deep targets set the challenge of how to optimally reveal the potential of side-gun data to improve the final image. Three-dimensional effects and severe aliasing in the crossline direction pose significant challenges for side-gun data processing. We present a comprehensive workflow to resolve these challenges consisting of 3D deghosting, 3D model-based water-layer demultiple, 3D surface-related multiple elimination, and 4D regularization for sparse and shallow-water wide-azimuth data. A tilted orthorhombic velocity model is built with better constraints from the wide-azimuth data, leading to improved fault positioning and imaging. Side-gun data clearly enhance the final target reservoir image and tie better with well data due to improved illumination. A new channel is discovered based on interpretation from the inverted VP/VS, explaining the previous incorrect prediction for one failed well that was drilled into a thinner and shallower channel unconnected to the main reservoir. An analysis of the impact of side-gun data from different offsets and azimuths shows that better azimuthal distribution within middle offset ranges had a more significant impact than far offsets in the final image of this survey. This information provides valuable reference in similar geologic conditions for future acquisition designs.

scholarly journals Genesis and Evolution of Ferromanganese Crusts from the Summit of Rio Grande Rise, Southwest Atlantic Ocean

Minerals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 349 ◽  
Author(s):  
Mariana Benites ◽  
James R. Hein ◽  
Kira Mizell ◽  
Terrence Blackburn ◽  
Luigi Jovane
Keyword(s):  
Atlantic Ocean ◽  
Shallow Water ◽  
Water Column ◽  
Rio Grande ◽  
Intermediate Water ◽  
Mode Water ◽  
Southwest Atlantic ◽  
Ferromanganese Crusts ◽  
Depositional Processes ◽  
Water Depths

The Rio Grande Rise (RGR) is a large elevation in the Atlantic Ocean and known to host potential mineral resources of ferromanganese crusts (Fe–Mn), but no investigation into their general characteristics have been made in detail. Here, we investigate the chemical and mineralogical composition, growth rates and ages of initiation, and phosphatization of relatively shallow-water (650–825 m) Fe–Mn crusts dredged from the summit of RGR by using computed tomography, X-ray diffraction, 87Sr/86Sr ratios, U–Th isotopes, and various analytical techniques to determine their chemical composition. Fe–Mn crusts from RGR have two distinct generations. The older one has an estimated age of initiation around 48–55 Ma and was extensively affected by post-depositional processes under suboxic conditions resulting in phosphatization during the Miocene (from 20 to 6.8 Ma). As a result, the older generation shows characteristics of diagenetic Fe–Mn deposits, such as low Fe/Mn ratios (mean 0.52), high Mn, Ni, and Li contents and the presence of a 10 Å phyllomanganate, combined with the highest P content among crusts (up to 7.7 wt %). The younger generation is typical of hydrogenetic crusts formed under oxic conditions, with a mean Fe/Mn ratio of 0.75 and mean Co content of 0.66 wt %, and has the highest mean contents of Bi, Nb, Ni, Te, Rh, Ru, and Pt among crusts formed elsewhere. The regeneration of nutrients from local biological productivity in the water column is the main source of metals to crusts, providing mainly metals that regenerate rapidly in the water column and are made available at relatively shallow water depths (Ni, As, V, and Cd), at the expense of metals of slower regeneration (Si and Cu). Additionally, important contributions of nutrients may derive from various water masses, especially the South Atlantic Mode Water and Antarctic Intermediate Water (AAIW). Bulk Fe–Mn crusts from the summit of RGR plateau are generally depleted in metals considered of greatest economic interest in crusts like Co, REE, Mo, Te, and Zr, but are the most enriched in the critical metals Ni and Li compared to other crusts. Further investigations are warranted on Fe–Mn crusts from deeper-water depths along the RGR plateau and surrounding areas, which would less likely be affected by phosphatization.

scholarly journals Improvement of anisotropic porosity models with a merging technique

2018 ◽  
Vol 40 ◽  
pp. 06023
Author(s):  
Martin Bruwier ◽  
Pierre Archambeau ◽  
Sébastien Erpicum ◽  
Michel Pirotton ◽  
Benjamin Dewals
Keyword(s):  
Shallow Water ◽  
Flow Characteristics ◽  
Threshold Value ◽  
Computational Grid ◽  
Computational Time ◽  
Time Step ◽  
Shallow Water Models ◽  
The Cost ◽  
The Impact ◽  
Porosity Model

Anisotropic porosity shallow-water models are used to take into account detailed topographic information through porosity parameters multiplying the various terms of the shallow-water equations. A storage porosity is assigned to each cell to reflect the void fraction in the cell and a conveyance porosity is used at each edge to reproduce the impact of subgrid obstacles on the flux terms. To guaranty the numerical stability, the time step depends on the value of the porosity parameters. This may hamper severely the computational efficiency in the presence of cells with low values of storage porosity. Cartesian grids are particularly sensitive to such a case since the meshing stems directly from the choice of the grid size. In this paper, this problem is addressed by using an original merging technique consisting in merging cells with a storage porosity lower than a threshold value with neighbouring cells. The model was tested for modelling a prismatic channel with different orientations between the Cartesian computational grid and the channel direction. The results show that the standard anisotropic porosity model (without merging) improves the reproduction of the flow characteristics; but at the cost of a significantly higher computational time. In contrast, the computational time is drastically reduced and the accuracy preserved when the merging technique is used with the porosity model.

Sign in / Sign up

Export Citation Format

Share Document