Limiting performance and optimal synthesis of elastic‐inertial multi‐degree‐of‐freedom vibration isolation systems

2007 ◽  
Vol 121 (5) ◽  
pp. 3097-3097
Author(s):  
Vyacheslav Ryaboy
Keyword(s):  
Vibration Isolation ◽  
Degree Of Freedom ◽  
Optimal Synthesis ◽  
Isolation Systems

A Modular-Type Three-Axis Vibration Isolation System Using Negative Stiffness

2010 ◽  
Author(s):  
Md. Emdadul Hoque ◽  
Takeshi Mizuno ◽  
Yuji Ishino ◽  
Masaya Takasaki
Keyword(s):  
Vibration Isolation ◽  
Degree Of Freedom ◽  
Experimental Results ◽  
Negative Stiffness ◽  
Isolation System ◽  
Single Degree Of Freedom ◽  
Vibration Isolation System ◽  
Single Degree ◽  
In Series ◽  
Isolation Systems

A vibration isolation system is presented in this paper which is developed by the combination of multiple vibration isolation modules. Each module is fabricated by connecting a positive stiffness suspension in series with a negative stiffness suspension. Each vibration isolation module can be considered as a self-sufficient single-degree-of-freedom vibration isolation system. 3-DOF vibration isolation system can be developed by combining three modules. As the number of motions to be controlled and the number of actuators are equal, there is no redundancy in actuators in such vibration isolation systems. Experimental results are presented to verify the proposed concept of the development of MDOF vibration isolation system using vibration isolation modules.

Design and analysis of a vibration isolation system with cam–roller–spring–rod mechanism

2021 ◽  
pp. 107754632110005
Author(s):  
Yonglei Zhang ◽  
Guo Wei ◽  
Hao Wen ◽  
Dongping Jin ◽  
Haiyan Hu
Keyword(s):  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Experimental Studies ◽  
Excitation Amplitude ◽  
Isolation System ◽  
Vibration Isolation System ◽  
Stiffness Characteristic ◽  
Negative Stiffness Mechanism ◽  
Isolation Systems ◽  
Vibration Isolation Performance

The vibration isolation system using a pair of oblique springs or a spring-rod mechanism as a negative stiffness mechanism exhibits a high-static low-dynamic stiffness characteristic and a nonlinear jump phenomenon when the system damping is light and the excitation amplitude is large. It is possible to remove the jump via adjusting the end trajectories of the above springs or rods. To realize this idea, the article presents a vibration isolation system with a cam–roller–spring–rod mechanism and gives the detailed numerical and experimental studies on the effects of the above mechanism on the vibration isolation performance. The comparative studies demonstrate that the vibration isolation system proposed works well and outperforms some other vibration isolation systems.

Sign in / Sign up

Export Citation Format

Share Document