Audio processing system using delayed audio

1994 ◽  
Vol 95 (3) ◽  
pp. 1702-1702
Author(s):  
John A. Cowan
Keyword(s):  
Processing System ◽  
Audio Processing

scholarly journals A design of laser array harp based on multi-dimensional wavelet transform and audio signal reconstruction

2021 ◽  
Vol 2113 (1) ◽  
pp. 012059
Author(s):  
Bin Liu ◽  
Yan Ren
Keyword(s):  
Wavelet Transform ◽  
Analog Circuits ◽  
Signal Reconstruction ◽  
Green Light ◽  
Processing System ◽  
Audio Signal ◽  
Laser Sensor ◽  
Laser Array ◽  
Audio Processing ◽  
Control Command

Abstract This paper introduces a design scheme of laser array harp based on multi-dimensional wavelet transform and audio signal reconstruction. The green light beams from multiple high-power lasers simulate harp strings, use photoresistors as the signal receiving end, and use a signal conditioning system composed of analog circuits and LM393 comparators to collect and adjust the resistance signal of the laser sensor[1], and finally it is adjusted to a level signal that can be recognized by the CPU. After receiving the signal, the CPU core board analyzes the string signal, and sends control commands to the audio processing system through the industrial bus according to the analyzed digital signal. After receiving the control command, the audio processing system uses the audio signal reconstruction technology composed of multi-dimensional wavelet packets, deep learning and other algorithms to simulate the audio signals of various string music, so as to achieve the purposes of using the lasers as virtual strings and imitating musical instruments for musical performance.[2]

Cinema audio processing system

2007 ◽  
Vol 121 (2) ◽  
pp. 683
Author(s):  
David Stanley McGrath
Keyword(s):  
Processing System ◽  
Audio Processing

scholarly journals A proposed design for an audio processing system

1998 ◽  
Vol 3 (1) ◽  
pp. 77-84
Author(s):  
Victor Lazzarini
Keyword(s):  
Processing System ◽  
Audio Processing

Digital image processing methods applied to the study of annealing time on semiconductor-metal eutectic composites

1988 ◽  
Vol 46 ◽  
pp. 848-849
Author(s):  
J. Hefter
Keyword(s):  
Image Processing ◽  
Digital Image Processing ◽  
Digital Image ◽  
Electronic Device ◽  
Processing System ◽  
Average Diameter ◽  
Eutectic Solidification ◽  
Metal Silicide ◽  
The Matrix ◽  
Microscopic Studies

Semiconductor-metal composites, formed by the eutectic solidification of silicon and a metal silicide have been under investigation for some time for a number of electronic device applications. This composite system is comprised of a silicon matrix containing extended metal-silicide rod-shaped structures aligned in parallel throughout the material. The average diameter of such a rod in a typical system is about 1 μm. Thus, characterization of the rod morphology by electron microscope methods is necessitated.The types of morphometric information that may be obtained from such microscopic studies coupled with image processing are (i) the area fraction of rods in the matrix, (ii) the average rod diameter, (iii) an average circularity (roundness), and (iv) the number density (Nd;rods/cm2). To acquire electron images of these materials, a digital image processing system (Tracor Northern 5500/5600) attached to a JEOL JXA-840 analytical SEM has been used.

Digital Processing of STEM Images

1981 ◽  
Vol 39 ◽  
pp. 236-237
Author(s):  
A. V. Crewe ◽  
M. Ohtsuki
Keyword(s):  
High Resolution ◽  
Low Dose ◽  
Assembly Language ◽  
Processing System ◽  
Principal Component ◽  
Digital Processing ◽  
Image Analysis System ◽  
Black And White ◽  
Analysis System ◽  
Dose Imaging

We have assembled an image processing system for use with our high resolution STEM for the particular purpose of working with low dose images of biological specimens. The system is quite flexible, however, and can be used for a wide variety of images.The original images are stored on magnetic tape at the microscope using the digitized signals from the detectors. For low dose imaging, these are “first scan” exposures using an automatic montage system. One Nova minicomputer and one tape drive are dedicated to this task.The principal component of the image analysis system is a Lexidata 3400 frame store memory. This memory is arranged in a 640 x 512 x 16 bit configuration. Images are displayed simultaneously on two high resolution monitors, one color and one black and white. Interaction with the memory is obtained using a Nova 4 (32K) computer and a trackball and switch unit provided by Lexidata.The language used is BASIC and uses a variety of assembly language Calls, some provided by Lexidata, but the majority written by students (D. Kopf and N. Townes).

Software pattern recognition applied to nanodiffraction patterns from a STEM instrument

1986 ◽  
Vol 44 ◽  
pp. 694-695
Author(s):  
G.Y. Fan ◽  
J.M. Cowley
Keyword(s):  
Image Processing ◽  
Pattern Recognition ◽  
Computer Software ◽  
Processing System ◽  
Light Level ◽  
Host Computer ◽  
Low Light ◽  
Image Processing System ◽  
Recent Developments ◽  
On Line

In recent developments, the ASU HB5 has been modified so that the timing, positioning, and scanning of the finely focused electron probe can be entirely controlled by a host computer. This made the asynchronized handshake possible between the HB5 STEM and the image processing system which consists of host computer (PDP 11/34), DeAnza image processor (IP 5000) which is interfaced with a low-light level TV camera, array processor (AP 400) and various peripheral devices. This greatly facilitates the pattern recognition technique initiated by Monosmith and Cowley. Software called NANHB5 is under development which, instead of employing a set of photo-diodes to detect strong spots on a TV screen, uses various software techniques including on-line fast Fourier transform (FFT) to recognize patterns of greater complexity, taking advantage of the sophistication of our image processing system and the flexibility of computer software.

High-resolution measurement of birefringent fine structure in living cells using a new polarized light microscope

1995 ◽  
Vol 53 ◽  
pp. 54-55
Author(s):  
Rudolf Oldenbourg
Keyword(s):  
Light Microscope ◽  
Fluorescent Dyes ◽  
Polarized Light ◽  
Processing System ◽  
Video Camera ◽  
Molecular Organization ◽  
Computer Assisted ◽  
Image Recording ◽  
Birefringent Crystal ◽  
Technological Advances

The recent renaissance of the light microsope is fueled in part by technological advances in components on the periphery of the microscope, such as the laser as illumination source, electronic image recording (video), computer assisted image analysis and the biochemistry of fluorescent dyes for labeling specimens. After great progress in these peripheral parts, it seems timely to examine the optics itself and ask how progress in the periphery facilitates the use of new optical components and of new optical designs inside the microscope. Some results of this fruitful reflection are presented in this symposium.We have considered the polarized light microscope, and developed a design that replaces the traditional compensator, typically a birefringent crystal plate, with a precision universal compensator made of two liquid crystal variable retarders. A video camera and digital image processing system provide fast measurements of specimen anisotropy (retardance magnitude and azimuth) at ALL POINTS of the image forming the field of view. The images document fine structural and molecular organization within a thin optical section of the specimen.

Sign in / Sign up

Export Citation Format

Share Document