scholarly journals On the undamped natural frequencies and mode shapes of a finite‐element model of the cat eardrum

1983 ◽  
Vol 73 (5) ◽  
pp. 1657-1661 ◽  
Author(s):  
W. Robert J. Funnell
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes

Support-Condition Analyses of Rotating Beams Under Distributed Imbalance Loading

2011 ◽  
Author(s):  
Kai Jokinen ◽  
Erno Keskinen ◽  
Marko Jorkama ◽  
Wolfgang Seemann
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Cross Section ◽  
Cross Sections ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Constant Cross Section ◽  
Support Condition ◽  
Beam Elements

In roll balancing the behaviour of the roll can be studied either experimentally with trial weights or, if the roll dimensions are known, analytically by forming a model of the roll to solve response to imbalance. Essential focus in roll balancing is to find the correct amount and placing for the balancing mass or masses. If this selection is done analytically the roll model used in calculations has significant effect to the balancing result. In this paper three different analytic methods are compared. In first method the mode shapes of the roll are defined piece wisely. The roll is divided in to five parts having different cross sections, two shafts, two roll ends and a shell tube of the roll. Two boundary conditions are found for both supports of the roll and four combining equations are written to the interfaces of different roll parts. Totally 20 equations are established to solve the natural frequencies and to form the mode shapes of the non-uniform roll. In second model the flexibility of shafts and the stiffness of the roll ends are added to the support stiffness as serial springs and the roll is modelled as a one flexibly supported beam having constant cross section. Finally the responses to imbalance of previous models are compared to finite element model using beam elements. Benefits and limitations of each three model are then discussed.

Hydroelastic Modal Analysis of the Perforated Cylindrical Shell in SMART

2011 ◽  
Author(s):  
Youngin Choi ◽  
Seungho Lim ◽  
Kyoung-Su Park ◽  
No-Cheol Park ◽  
Young-Pil Park ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Steam Generators ◽  
Structure Interaction ◽  
The Finite Element Model ◽  
Reactor Internals

The System-integrated Modular Advanced ReacTor (SMART) developed by KAERI includes components like a core, steam generators, coolant pumps, and a pressurizer inside the reactor vessel. Though the integrated structure improves the safety of the reactor, it can be excited by an earthquake and pump pulsations. It is important to identify dynamic characteristics of the reactor internals considering fluid-structure interaction caused by inner coolant for preventing damage from the excitations. Thus, the finite element model is constructed to identify dynamic characteristics and natural frequencies and mode shapes are extracted from this finite element model.

Verification of a Finite Element Model of an Unmanned Aerial Vehicle Wing Torque Box via Experimental Modal Testing

2012 ◽  
Author(s):  
Levent Unlusoy ◽  
Melin Sahin ◽  
Yavuz Yaman
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Unmanned Aerial Vehicle ◽  
Natural Frequencies ◽  
Element Model ◽  
Modal Testing ◽  
Mode Shapes ◽  
Resonance Frequencies ◽  
Aerial Vehicle ◽  
Experimental Modal Testing

In this study, the detailed finite element model (FEM) of an unmanned aerial vehicle wing torque box was verified by the experimental modal testing. During the computational studies the free-free boundary conditions were used and the natural frequencies and mode-shapes of the structure were obtained by using the MSC® Software. The results were then compared with the experimentally obtained resonance frequencies and mode-shapes. It was observed that the frequencies were in close agreement having an error within the range of 1.5–3.6%.

On Updating of Finite Element Model Using Optimization Method

1997 ◽  
Author(s):  
Wolfgang G. Luber
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Natural Frequencies ◽  
Normal Modes ◽  
Mathematical Optimization ◽  
Element Model ◽  
Optimization Method ◽  
Mode Shapes ◽  
Initial Structure ◽  
Error Localization

Abstract An error localization and update method is presented which examines the elastic and dynamic behavior of the structure by means of deflections stemming from a discrete load case and from normal mode shapes of the structure respectively as well as the information of the change of natural frequencies. The main objective of the study is to provide an economical and reliable error localization method for aeronautical structures. A finite element model of the elastic structure must be available before testing the real structure to determine the optimal positioning of sensors. The error localization is based on sensitivity methods and on nonlinear mathematical optimization codes. Displacements for selected load cases and normal modes are taken as constraints. Minimum sizing changes with respect to the initial structure is used as objective function. Numerical examples with different structures show that the proposed methods can accurately detect the variations in stiffness in certain cases.

Simulation of Damage Scenarios in an FRP Composite Suspension Footbridge

2005 ◽  
Vol 293-294 ◽  
pp. 599-606 ◽  
Author(s):  
R.A. Votsis ◽  
M.M. Abdel Wahab ◽  
M.K. Chryssanthopoulos
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Limit States ◽  
Damage Scenarios ◽  
Frp Composite ◽  
Initial Strains

Simulations of damage scenarios were carried out using a finite element model of a newly constructed FRP composite footbridge, the Wilcott footbridge. This footbridge represents a new generation of suspension footbridges that have lightweight decks made of pultruded glass fibre reinforced polymer (GFRP) composite elements. It offers several advantages over conventional steel or concrete footbridges, e.g. speed of installation, high resistance to corrosion and saving in weight and foundations. On the other hand, its lightness and slenderness make it more sensitive to dynamic effects, both at serviceability and ultimate limit states. A finite element model using 3-D beam elements was constructed and damage scenarios were simulated and introduced in the model. The natural frequencies, mode shapes as well as time responses due to pedestrian loading were predicted. Different size of delamination in the composite deck was simulated at various locations along the bridge. The sensitivity of natural frequencies and mode shapes due to delamination were assessed by comparing the results of the damaged deck to those of the reference intact deck. The effect of changes in the cables’ initial strains on the modal parameters was also examined, and the sensitivity of modal parameters to cable degradation was assessed.

Coupled Bending-Torsion Vibration of Geared Rotors

1995 ◽  
Author(s):  
J. S. Rao ◽  
J. R. Chang ◽  
T. N. Shiau
Keyword(s):  
Finite Element ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Mesh Stiffness ◽  
Present Program ◽  
Gear Mesh ◽  
Pressure Angle ◽  
Torsion Vibration ◽  
Gear Mesh Stiffness

Abstract A general finite element model is presented for determining the coupled bending-torsion natural frequencies and mode shapes of geared rotors. Uncoupled bending and torsion frequencies are obtained for examples available in literature and the present program is verified against these. The effect of the gear box is considered to determine the coupled frequencies. Parameters studied include the pressure angle, gear mesh stiffness, and bearing properties. The gear pressure angle is shown to have no effect on the natural frequencies of rotors supported on isotropic bearing supports. Several case studies with bending-torsion coupling are considered and the results obtained are compared with those available in literature. The results of a general rotor system with 8lodes are also presented.

scholarly journals Dynamic Analysis of Tapered Thin-Walled Beams Using Spectral Finite Element Method

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Yiping Shen ◽  
Zhijun Zhu ◽  
Songlai Wang ◽  
Gang Wang
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Wind Turbine ◽  
Element Model ◽  
Rotor Blades ◽  
Mode Shapes ◽  
Modal Frequency ◽  
Thin Walled Structures ◽  
Thin Walled ◽  
Spectral Finite Element

Tapered thin-walled structures have been widely used in wind turbine and rotor blade. In this paper, a spectral finite element model is developed to investigate tapered thin-walled beam structures, in which torsion related warping effect is included. First, a set of fully coupled governing equations are derived using Hamilton’s principle to account for axial, bending, and torsion motion. Then, the differential transform method (DTM) is applied to obtain the semianalytical solutions in order to formulate the spectral finite element. Finally, numerical simulations are conducted for tapered thin-walled wind turbine rotor blades and validated by the ANSYS. Modal frequency results agree well with the ANSYS predictions, in which approximate 30,000 shell elements were used. In the SFEM, one single spectral finite element is needed to perform such calculations because the interpolation functions are deduced from the exact semianalytical solutions. Coupled axial-bending-torsion mode shapes are obtained as well. In summary, the proposed spectral finite element model is able to accurately and efficiently to perform the modal analysis for tapered thin-walled rotor blades. These modal frequency and mode shape results are important to carry out design and performance evaluation of the tapered thin-walled structures.

Dynamic Characteristics and Finite Element Model Updating of Micromachined Torsion Structures

2013 ◽  
Vol 284-287 ◽  
pp. 1831-1835
Author(s):  
Wei Hsin Gau ◽  
Kun Nan Chen ◽  
Yunn Lin Hwang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Element Model ◽  
Model Updating ◽  
Speckle Pattern ◽  
Element Model ◽  
Mode Shapes ◽  
Electronic Speckle Pattern Interferometry ◽  
Finite Element Model Updating ◽  
Element Analysis

In this paper, two experimental techniques, Electronic Speckle Pattern Interferometry and Stroboscopic Interferometry, and two different finite element analysis packages are used to measure or to analyze the frequencies and mode shapes of a micromachined, cross-shaped torsion structure. Four sets of modal data are compared and shown having a significant discrepancy in their frequency values, although their mode shapes are quite consistent. Inconsistency in the frequency results due to erroneous inputs of geometrical and material parameters to the finite element analysis can be salvaged by applying the finite element model updating procedure. Two updating cases show that the optimization sequences converge quickly and significant improvements in frequency prediction are achieved. With the inclusion of the thickness parameter, the second case yields a maximum of under 0.4% in frequency difference, and all parameters attain more reliable updated values.

Sign in / Sign up

Export Citation Format

Share Document