Experimental evaluation of the aeroacoustic characteristics of a source of pulsating gas flow

1979 ◽  
Vol 65 (1) ◽  
pp. 240-248 ◽  
Author(s):  
M. L. Kathuriya ◽  
M. L. Munjal
1992 ◽  
Vol 46 (4) ◽  
pp. 669-676 ◽  
Author(s):  
Coral Robles ◽  
Juan Mora ◽  
Antonio Canals

The Nukiyama-Tanasawa equation has been checked for its applicability to predict the Sauter mean diameter of aerosols generated pneumatically under the conditions usually employed in FAAS. The measurements of droplet-size distribution have been carried out by means of a laser Fraunhofer diffraction system. The effects of both gas and liquid flows, and solvent physical properties, on experimental and calculated Sauter mean diameters of the aerosols have been studied. The results show that this equation, under normal conditions used in FAAS, correctly describes the trends of Sauter mean diameter variation of aerosols generated pneumatically with respect to the flows of nebulizing gas and liquid. Increases in liquid flow or decreases in gas flow give rise to increases in Sauter mean diameters of the aerosols. However, the absolute values predicted according to the equation far exceed the experimental Sauter mean diameters obtained, the divergences being larger at higher liquid flow/nebulizing gas flow ratios. The overestimation for water ranged from 1.8- to 8.1-fold, and for organic solvents and methanol+water mixtures from 3.6- to 13.3-fold. Under the conditions studied, experimental Sauter mean diameter values for the organic solvents and methanol+water mixtures studied were well below those found for water, under comparable conditions. This result contradicts the predictions of the Nukiyama-Tanasawa equation mainly at high liquid flow/nebulizing gas flow ratios. The main reason for this divergence is the overweighting assigned to the second term of the equation.


1998 ◽  
Vol 71 (3) ◽  
pp. 474-480
Author(s):  
A. N. Antonov ◽  
M. A. Antonov ◽  
I. A. Graur ◽  
L. V. Kosarev ◽  
B. N. Chetverushkin

1974 ◽  
Vol 7 (9) ◽  
pp. 346-348
Author(s):  
E. W. Reed ◽  
M. A. Ali ◽  
K. F. Gill

Demonstrated is an experimental means of measuring the mean flow velocity of a pulsating gas flow without the use of pipe constrictions. Small pseudo random binary sequence pressure pulses are injected into the flow. Correlation techniques are used to determine the velocity of propagation of these pulses from which the mean gas flow velocity can be calculated. The method is shown to be especially effective for high-velocity pulsating flows where measuring techniques at the present time are inadequate.


Sign in / Sign up

Export Citation Format

Share Document