Two‐dimensional real‐time ultrasound technique to control lesion size during high intesity focused ultrasound therapy.

2011 ◽  
Vol 129 (4) ◽  
pp. 2437-2437
Author(s):  
John Petruzzello ◽  
Ajay Anand ◽  
Shiwei Zhou ◽  
Shriram Sethuraman ◽  
Jose Azevedo
Keyword(s):  
Real Time ◽  
Focused Ultrasound ◽  
Lesion Size ◽  
Ultrasound Therapy ◽  
Two Dimensional ◽  
Ultrasound Technique ◽  
Control Lesion

Two-Dimensional Real-time Ultrasound Technique to Control Lesion Size during HIFU Therapy

2010 ◽  
Author(s):  
Ajay Anand ◽  
John Petruzzello ◽  
Shiwei Zhou ◽  
Shriram Sethuraman ◽  
Jose Azevedo ◽  
...  
Keyword(s):  
Real Time ◽  
Lesion Size ◽  
Two Dimensional ◽  
Ultrasound Technique ◽  
Control Lesion

Real time two‐dimensional temperature imaging for guidance and monitoring of high‐intensity focused ultrasound beams.

2010 ◽  
Vol 128 (4) ◽  
pp. 2416-2416
Author(s):  
Dalong Liu ◽  
John R. Ballard ◽  
Alyona Haritonova ◽  
Jing Jiang ◽  
John C. Bischof ◽  
...  
Keyword(s):  
Real Time ◽  
High Intensity ◽  
Focused Ultrasound ◽  
High Intensity Focused Ultrasound ◽  
Two Dimensional ◽  
Temperature Imaging

Ultrasound-based Safety Assessment during Moving Organ Tracking Towards In Vivo Focused Ultrasound Therapy

2019 ◽  
Author(s):  
A Mariani ◽  
◽  
L Morchi ◽  
A Diodato ◽  
A Cafarelli ◽  
...  
Keyword(s):  
Safety Assessment ◽  
Focused Ultrasound ◽  
Ultrasound Therapy

CALCULATION OF THE DEPENDENCE OF THE DISTANCE TO THE LOCATED OBJECT FROM THE CORNER POSITION OF THE VEHICLE LINE

2018 ◽  
pp. 14-18
Author(s):  
V. V. Artyushenko ◽  
A. V. Nikulin
Keyword(s):  
Real Time ◽  
Statistical Physics ◽  
Angular Position ◽  
Three Dimensional ◽  
Line Of Sight ◽  
Two Dimensional ◽  
Radar Station ◽  
Flight Mode ◽  
Vector Algebra ◽  
Analytical Expressions

To simulate echoes from the earth’s surface in the low flight mode, it is necessary to reproduce reliably the delayed reflected sounding signal of the radar in real time. For this, it is necessary to be able to calculate accurately and quickly the dependence of the distance to the object being measured from the angular position of the line of sight of the radar station. Obviously, the simplest expressions for calculating the range can be obtained for a segment or a plane. In the text of the article, analytical expressions for the calculation of range for two-dimensional and three-dimensional cases are obtained. Methods of statistical physics, vector algebra, and the theory of the radar of extended objects were used. Since the calculation of the dependence of the range of the object to the target from the angular position of the line of sight is carried out on the analytical expressions found in the paper, the result obtained is accurate, and due to the relative simplicity of the expressions obtained, the calculation does not require much time.

Accelerating laser processes with a smart two-dimensional polygon mirror scanner for ultra-fast beam deflection

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Florian Roessler ◽  
André Streek
Keyword(s):  
Energy Distribution ◽  
Real Time ◽  
Laser Processing ◽  
High Speed ◽  
Beam Deflection ◽  
Two Dimensional ◽  
Heat Accumulation ◽  
Field Programmable ◽  
Drill Holes ◽  
Average Laser

Abstract In laser processing, the possible throughput is directly scaling with the available average laser power. To avoid unwanted thermal damage due to high pulse energy or heat accumulation during MHz-repetition rates, energy distribution over the workpiece is required. Polygon mirror scanners enable high deflection speeds and thus, a proper energy distribution within a short processing time. The requirements of laser micro processing with up to 10 kW average laser powers and high scan speeds up to 1000 m/s result in a 30 mm aperture two-dimensional polygon mirror scanner with a patented low-distortion mirror configuration. In combination with a field programmable gate array-based real-time logic, position-true high-accuracy laser switching is enabled for 2D, 2.5D, or 3D laser processing capable to drill holes in multi-pass ablation or engraving. A special developed real-time shifter module within the high-speed logic allows, in combination with external axis, the material processing on the fly and hence, processing of workpieces much larger than the scan field.

Sign in / Sign up

Export Citation Format

Share Document