Underwater Explosion Shock Wave Parameters at Large Distances from the Charge

1954 ◽  
Vol 26 (3) ◽  
pp. 343-346 ◽  
Author(s):  
A. B. Arons
Keyword(s):  
Shock Wave ◽  
Underwater Explosion ◽  
Wave Parameters

Conditions needed for generation of type II radio emission in the interplanetary space

2021 ◽  
Author(s):  
Immanuel Christopher Jebaraj ◽  
Athanasios Kouloumvakos ◽  
Jasmina Magdalenic ◽  
Alexis Rouillard ◽  
Vratislav Krupar ◽  
...  
Keyword(s):  
Shock Wave ◽  
Shock Waves ◽  
Radio Emission ◽  
Interplanetary Space ◽  
Region Of Interest ◽  
Type Ii ◽  
Radio Observations ◽  
Wave Parameters ◽  
First Results ◽  
Radio Signature

<p>Eruptive events such as Coronal mass ejections (CMEs) and flares cangenerate shock waves. Tracking shock waves and predicting their arrival at Earth is a subject of numerous space weather studies. Ground-based radio observations allow us to locate shock waves in the low corona while space-based radio observations provide us opportunity to track shock waves in the inner heliosphere. We present a case study of CME/flare event, associated shock wave and its radio signature, i.e. type II radio burst.</p><p>In order to analyze the shock wave parameters, we employed a robust paradigm. We reconstructed the shock wave in 3D using multi-viewpoint observations and modelled the evolution of its parameters using a 3D MHD background coronal model produced by the MAS (Magnetohydrodynamics Around a Sphere).</p><p>To map regions on the shock wave surface, possibly associated with the electron acceleration, we combined 3D shock modelling results with the 3D source positions of the type II burst obtained using the radio triangulation technique. We localize the region of interest on the shock surface and examine the shock wave parameters to understand the relationship between the shock wave and the radio event. We analyzed the evolution of the upstream plasma characteristics and shock wave parameters during the full duration of the type II radio emission. First results indicate that shock wave geometry and its relationship with shock strength play an important role in the acceleration of electrons responsible for the generation of type II radio bursts.</p>

scholarly journals A Lab-Scale Experiment Approach to the Measurement of Wall Pressure from Near-Field under Water Explosions by a Hopkinson Bar

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Xiongwei Cui ◽  
Xiongliang Yao ◽  
Yingyu Chen
Keyword(s):  
Shock Wave ◽  
Near Field ◽  
Underwater Explosion ◽  
Experimental System ◽  
Hopkinson Bar ◽  
Wall Pressure ◽  
Pressure Loading ◽  
Target Plate ◽  
Wave Pressure ◽  
Shock Wave Pressure

Direct measurement of the wall pressure loading subjected to the near-field underwater explosion is of great difficulty. In this article, an improved methodology and a lab-scale experimental system are proposed and manufactured to assess the wall pressure loading. In the methodology, a Hopkinson bar (HPB), used as the sensing element, is inserted through the hole drilled on the target plate and the bar’s end face lies flush with the loaded face of the target plate to detect and record the pressure loading. Furthermore, two improvements have been made on this methodology to measure the wall pressure loading from a near-field underwater explosion. The first one is some waterproof units added to make it suitable for the underwater environment. The second one is a hard rubber cylinder placed at the distal end, and a pair of ropes taped on the HPB is used to pull the HPB against the cylinder hard to ensure the HPB’s end face flushes with loaded face of the target plate during the bubble collapse. To validate the pressure measurement technique based on the HPB, an underwater explosion between two parallelly mounted circular target plates is used as the validating system. Based on the assumption that the shock wave pressure profiles at the two points on the two plates which are symmetrical to each other about the middle plane of symmetry are the same, it was found that the pressure obtained by the HPB was in excellent agreement with pressure transducer measurements, thus validating the proposed technique. To verify the capability of this improved methodology and experimental system, a series of minicharge underwater explosion experiments are conducted. From the recorded pressure-time profiles coupled with the underwater explosion evolution images captured by the HSV camera, the shock wave pressure loading and bubble-jet pressure loadings are captured in detail at 5  mm, 10  mm, …, 30  mm stand-off distances. Part of the pressure loading of the experiment at 35  mm stand-off distance is recorded, which is still of great help and significance for engineers. Especially, the peak pressure of the shock wave is captured.

Behavior of Bubble in Small Water Tank Used for Food Processing Using Underwater Shock Wave

2011 ◽  
Vol 673 ◽  
pp. 225-230 ◽  
Author(s):  
Hideki Hamashima ◽  
Manabu Shibuta ◽  
Shigeru Itoh
Keyword(s):  
Numerical Simulation ◽  
Shock Wave ◽  
Food Processing ◽  
High Speed ◽  
Underwater Explosion ◽  
Video Camera ◽  
Experimental Result ◽  
Water Tank ◽  
Underwater Shock Wave ◽  
Small Water

The food processing technology using a shock wave can prevent deterioration of the food by heat because it can process food in a short time. Generally, since the shock wave used for food processing is generated by underwater explosion, the load of a shock wave to the food becomes very complicated. Therefore, in order to process safely, it is important to clarify the behaviors of the shock wave and the bubble pulse generated by underwater explosion. In this research, in order to investigate the behavior of the shock wave in the water tank used for food processing, the optical observation experiment and the numerical simulation were performed. In the experiment, the shock wave generated by underwater explosion was observed with the high-speed video camera. The numerical simulation about the behavior of bubble pulse was performed using analysis software LS-DYNA. Comparing and examining were performed about the experimental result and the numerical simulation result. The result of the numerical simulation about the behavior of the shock wave generated by underwater explosion and the shock wave generated by the bubble pulse and the bubble pulse was well in agreement with the experimental result.

scholarly journals Research on the influence of bubble curtains on shock wave fields of the underwater explosion

2021 ◽  
Vol 62 (5) ◽  
pp. 97-105
Author(s):  
Thang Trong Dam ◽  
Viet Duc Tran ◽  
Keyword(s):  
Shock Wave ◽  
Shock Waves ◽  
Layered Medium ◽  
Underwater Explosion ◽  
Physical Property ◽  
Propagation Rule ◽  
Incident Waves ◽  
Refracted Waves ◽  
Rock And Soil ◽  
Bubble Curtain

Shock waves, which derive from explosions, generate reflected and refracted waves when propagating in the layered medium with various acoustic stiffness. Depending on the acoustic characteristic of each layer of the medium, properties of reflected and refracted waves will increase or decrease pressures/stresses at the investigated point of medium, compared to influences of explosive shock waves (incident waves) propagated in a homogeneous and isotropic medium. Based on this mechanical physical property, scientists have studied a diversity of solutions decreasing effects of explosive shock waves in various medium such as rock and soil, water, air. However, currently there have not been any comprehensive theoretical studies on the reduction in intensity of the underwater explosion shock wave when interacting with bubble curtain. By using the analytical method and the virtual explosive method, the paper presents the propagation rule of new waves formed when the underwater explosion shock wave interacts with the bubble curtain. The results showed that the more the thickness of the bubble curtain or the higher the bubble content or the longer the distance from the explosive to the curtain, the weaker the intensity of the shock wave when passing through the curtain.

Experiments on the relation of shock wave parameters to stone disintegration

1998 ◽  
Vol 103 (5) ◽  
pp. 3072-3072 ◽  
Author(s):  
Thomas Dreyer ◽  
Rainer E. Riedlinger ◽  
Eckard Steiger
Keyword(s):  
Shock Wave ◽  
Wave Parameters

High Pressure Generation Using Underwater Explosion of a Spiral Explosive in a Conical Vessel

2004 ◽  
Vol 126 (2) ◽  
pp. 258-263
Author(s):  
Toru Hamada ◽  
Shigeru Itoh ◽  
Kenji Murata ◽  
Yukio Kato
Keyword(s):  
Shock Wave ◽  
Characteristic Curve ◽  
Three Dimensional ◽  
Underwater Explosion ◽  
Initial Pressure ◽  
Maximum Pressure ◽  
Underwater Shock Wave ◽  
Expansion Curve ◽  
Underwater Shock ◽  
Manganin Gauge

An explosive configuration was studied so that the underwater shock wave converges at the tip of the explosive, and a three-dimensional spiral configuration was obtained. This spiral configuration need to be analyzed theoretically due to the relation of propagation velocity of underwater shock wave, detonation velocity of the explosive and a configuration of vessel to charge the explosive. In order to study an effect of the convergence, pressure measurement at the spiral center was carried out by using a manganin gauge. Therefore, when SEP was used in this experiment, the maximum pressure value was 17.7 GPa. This maximum pressure value is higher than the pressure value of underwater shock wave generated from the underwater explosion of a straight configuration. Furthermore, this maximum pressure value was higher than C-J pressure of SEP. An initial pressure of underwater shock water shock wave that can obtain from an isentropic expansion curve of SEP and a characteristic curve of water is 5.7 GPa, and C-J pressure of SEP is 15.9 GPa. From the above-mentioned, the effect of spiral convergence could be shown well.

Pressure Load on Rigid Structure Induced by Double Underwater Explosions

2016 ◽  
Author(s):  
Rui Han ◽  
Aman Zhang ◽  
Shiping Wang
Keyword(s):  
Shock Wave ◽  
Underwater Explosion ◽  
Time Difference ◽  
Wave Load ◽  
Underwater Explosions ◽  
Rigid Structure ◽  
Pressure Load ◽  
Adjacent Structures ◽  
Explosive Source ◽  
Source Case

Underwater explosion is a severe threat to nearby ocean structures, such as underwater construction, floating vessels. The pressure load produced by underwater explosion of explosives consists of shock wave load and the explosion bubble pulsation pressure load. After the detonation, there will be a shock wave propagating radially outwards and it’s followed by a large oscillating bubble. The shock wave has the first damaging effect on adjacent structures. Then, the collapse and high-speed jet of oscillating bubbles will cause the second damage to structures. When there are double explosive sources near a rigid structure, the mutual superposition of shock waves and the interaction between two bubbles may improve the explosive damage. If the distance between one explosive source and the rigid structure is fixed, the damage force produced by double underwater explosions is related to many factors, like the detonation time difference and the distance between two explosive sources. At first, the pressure field in single explosive source case is numerically simulated by using the AUTODYN in this paper. Next, pressure fields of underwater explosion detonated by double sources at the same time and with time difference are calculated, respectively. The flow fields in double explosive sources case are compared with that in single explosive source case. The effect of the detonation time difference and the distance between explosive sources on the damage force is investigated and analysed in detail.

Sign in / Sign up

Export Citation Format

Share Document