Numerical simulation of the excitation of a Helmholtz resonator by a grazing flow

2003 ◽  
Vol 114 (4) ◽  
pp. 1833-1840 ◽  
Author(s):  
S. Mallick ◽  
R. Shock ◽  
V. Yakhot
Keyword(s):  
Numerical Simulation ◽  
Helmholtz Resonator ◽  
Grazing Flow

ON DESIGNING IMPEDANCE TUBE WITH GRAZING FLOW

Akustika ◽  
2021 ◽  
pp. 80
Author(s):  
Vadim Palchikovskiy ◽  
Igor Khramtsov ◽  
Aleksander Kuznetsov ◽  
Victor Pavlogradskiy
Keyword(s):  
Numerical Simulation ◽  
Analytical Solutions ◽  
Gas Dynamics ◽  
Aircraft Engine ◽  
Design Parameters ◽  
Experimental Setup ◽  
Structural Units ◽  
Impedance Tube ◽  
Acoustic Liners ◽  
Grazing Flow

The article considers the general issues arising in designing the experimental setup “Impedance tube with grazing flow”, the main structural units of the setup, and their purpose. It is given the basic requirements to be provided by the setup when testing samples of acoustic liners used in an aircraft engine. The choosing of the design parameters of the setup is based on the analysis of the known analytical solutions of the acoustics and gas dynamics, and on the numerical simulation of the grazing flow in the impedance tube.

Numerical Simulation of 2D Grazing Flow using Cartesian-mesh CFD

2017 ◽  
Vol 2017.30 (0) ◽  
pp. 216
Author(s):  
Tsubasa Iwafune ◽  
Daisuke Sasaki ◽  
Hidemi Toh ◽  
Tatsuya Ishii
Keyword(s):  
Numerical Simulation ◽  
Cartesian Mesh ◽  
Grazing Flow

scholarly journals Numerical investigation on low-frequency noise damping performances of Helmholtz resonators with an extended neck in presence of a grazing flow

2021 ◽  
pp. 146134842110205
Author(s):  
Weiwei Wu ◽  
Yiheng Guan
Keyword(s):  
Resonant Frequency ◽  
Stokes Equations ◽  
Transmission Loss ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Frequency Noise ◽  
Frequency Range ◽  
Helmholtz Resonators ◽  
Numerical Predictions ◽  
Grazing Flow

In this work, modified designs of Helmholtz resonators with extended deflected neck are proposed, numerically evaluated and optimized aiming to achieve a better transmission loss performance over a broader frequency range. For this, 10 Helmholtz resonators with different extended neck configurations (e.g. the angle between extended neck and the y-axis) in the presence of a grazing flow are assessed. Comparison is then made between the proposed resonators and the conventional one, i.e. in the absence of an extended neck (i.e. Design A). For this, a two-dimensional linearized Navier Stokes equations-based model of a duct with the modified Helmholtz resonator implemented was developed in frequency domain. The model was first validated by comparing its numerical predictions with the experimental results available in the literature and the theoretical results. The model was then applied to evaluate the noise damping performance of the Helmholtz resonator with (1) an extended neck on the upstream side (Design B); (2) on the downstream side (Design C), (3) both upstream and downstream sides (Design D), (4) the angle between the extended neck and the y-axis, i.e. (a) 0°, (b) 30°, and (c) 45°, (d) 48.321°. In addition, the effects of the grazing flow Mach number (Ma) were evaluated. It was found that the transmission loss peaks of the Helmholtz resonator with the extended neck was maximized at Ma = 0.03 than at the other Mach numbers. Conventional resonator, i.e. Design A was observed to be associated with a lower transmission loss performance at a lower resonant frequency than those as observed on Designs B–D. Moreover, the optimum design of the proposed resonators with the extended neck is shown to be able to shift the resonant frequency by approximately 90 Hz, and maximum transmission loss could be increased by 28–30 dB. In addition, the resonators with extended necks are found to be associated with two or three transmission loss peaks, indicating that these designs have a broader effective frequency range. Finally, the neck deflection angles of 30° and 45° are shown to be involved with better transmission loss peaks than that with a deflection angle of 0°. In summary, the present study sheds light on maximizing the resonator’s noise damping performances by applying and optimizing an extended neck.

scholarly journals Attenuation Performance of a Semi-Active Helmholtz Resonator in a Grazing Flow Duct

2013 ◽  
Vol 03 (01) ◽  
pp. 25-29 ◽  
Author(s):  
Xiaofeng Shi ◽  
Cheuk Ming Mak ◽  
Jun Yang
Keyword(s):  
Helmholtz Resonator ◽  
Grazing Flow ◽  
Flow Duct
Sign in / Sign up

Export Citation Format

Share Document