Addendum to “A low cost remote sensing system using PC and stereo equipment” [Am. J. Phys. 79, 1240–1245 (2011)]

2014 ◽  
Vol 82 (10) ◽  
pp. 1000-1002
Author(s):  
Joel F. Campbell
2011 ◽  
Vol 79 (12) ◽  
pp. 1240-1245 ◽  
Author(s):  
Joel F. Campbell ◽  
Michael A. Flood ◽  
Narasimha S. Prasad ◽  
Wade D. Hodson

2019 ◽  
Vol 62 (2) ◽  
pp. 393-404 ◽  
Author(s):  
Aijing Feng ◽  
Meina Zhang ◽  
Kenneth A. Sudduth ◽  
Earl D. Vories ◽  
Jianfeng Zhou

Abstract. Accurate estimation of crop yield before harvest, especially in early growth stages, is important for farmers and researchers to optimize field management and evaluate crop performance. However, existing in-field methods for estimating crop yield are not efficient. The goal of this research was to evaluate the performance of a UAV-based remote sensing system with a low-cost RGB camera to estimate cotton yield based on plant height. The UAV system acquired images at 50 m above ground level over a cotton field at the first flower growth stage. Waypoints and flight speed were selected to allow >70% image overlap in both forward and side directions. Images were processed to develop a geo-referenced orthomosaic image and a digital elevation model (DEM) of the field that was used to extract plant height by calculating the difference in elevation between the crop canopy and bare soil surface. Twelve ground reference points with known height were deployed in the field to validate the UAV-based height measurement. Geo-referenced yield data were aligned to the plant height map based on GPS and image features. Correlation analysis between yield and plant height was conducted row-by-row with and without row registration. Pearson correlation coefficients between yield and plant height with row registration for all individual rows were in the range of 0.66 to 0.96 and were higher than those without row registration (0.54 to 0.95). A linear regression model using plant height was able to estimate yield with root mean square error of 550 kg ha-1 and mean absolute error of 420 kg ha-1. Locations with low yield were analyzed to identify the potential reasons, and it was found that water stress and coarse soil texture, as indicated by low soil apparent electricity conductivity (ECa), might contribute to the low yield. The findings indicate that the UAV-based remote sensing system equipped with a low-cost digital camera was potentially able to monitor plant growth status and estimate cotton yield with acceptable errors. Keywords: Cotton, Geo-registration, Plant height, UAV-based remote sensing, Yield estimation.


Author(s):  
Yu. V. Markov ◽  
◽  
A. S. Bokov ◽  
V. G. Vazhenin ◽  
V. V. Mukhin ◽  
...  

2019 ◽  
pp. 31-37
Author(s):  
I. G. Antсev ◽  
A. P. Aleshkin ◽  
V. V. Vladimirov ◽  
E. O. Kudrina ◽  
O. L. Polonchik ◽  
...  

The results of modeling the processes of receiving and processing the signals of remote sensing of the Earth’s surface using helicopter radar and synthesizing the antenna aperture due to its placement on the rotating rotor blades are presented. The mathematical correctness of the application of the developed algorithms for processing probing signals, as well as the uniqueness of the measurements, was confirmed. At the same time, the dimensions of the synthesized aperture due to the rotation of the radiator placed at the end of the propeller blade are equivalent to a circular antenna array with a diameter of tens of meters. The functionality of the remote sensing system based on this radar meets the requirements for ice observation and navigation systems for seagoing ships off the coast. The simulation results confirm the promise of further research in this direction and can be used in the development of radar systems with synthesized antenna aperture mounted on rotating rotor blades.


Sign in / Sign up

Export Citation Format

Share Document