SU-F-T-406: Verification of Total Body Irradiation Commissioned MU Lookup Table Accuracy Using Treatment Planning System for Wide Range of Patient Sizes

2016 ◽  
Vol 43 (6Part19) ◽  
pp. 3556-3556
Author(s):  
D Lewis ◽  
P Chi ◽  
R Tailor ◽  
M Aristophanous ◽  
S Tung
Keyword(s):  
Treatment Planning ◽  
Total Body Irradiation ◽  
Lookup Table ◽  
Planning System ◽  
Treatment Planning System ◽  
Wide Range ◽  
Total Body

Total body irradiation: A traditional technique reconsidered in the light of treatment planning system

2016 ◽  
Vol 32 ◽  
pp. 15
Author(s):  
A. Compagnucci ◽  
F. Fabbrizzi ◽  
C. Arilli ◽  
M. Casati ◽  
L. Marrazzo ◽  
...  
Keyword(s):  
Treatment Planning ◽  
Total Body Irradiation ◽  
Planning System ◽  
Treatment Planning System ◽  
Traditional Technique ◽  
Total Body

scholarly journals Feasibility of a Reusable Radiochromic Dosimeter

2021 ◽  
Vol 11 (21) ◽  
pp. 9906
Author(s):  
Joseph R. Newton ◽  
Maxwell Recht ◽  
Joseph A. Hauger ◽  
Gabriel Segarra ◽  
Chase Inglett ◽  
...  
Keyword(s):  
Treatment Planning ◽  
Optical Density ◽  
Dose Distribution ◽  
Ease Of Use ◽  
Planning System ◽  
Treatment Planning System ◽  
Patient Specific ◽  
High Dose ◽  
Wide Range ◽  
Radiochromic Dosimeter

The current practice for patient-specific quality assurance (QA) uses ion chambers or diode arrays primarily because of their ease of use and reliability. A standard routine compares the dose distribution measured in a phantom with the dose distribution calculated by the treatment planning system for the same experimental conditions. For the particular problems encountered in the treatment planning of complex radiotherapy techniques, such as small fields/segments and dynamic delivery systems, additional tests are required to verify the accuracy of dose calculations. The dose distribution verification should be throughout the total 3D dose distribution for a high dose gradient in a small, irradiated volume, instead of the standard practice of one to several planes with 2D radiochromic (GAFChromic) film. To address this issue, we have developed a 3D radiochromic dosimeter that improves the rigor of current QA techniques by providing high-resolution, complete 3D verification for a wide range of clinical applications. The dosimeter is composed of polyurethane, a radical initiator, and a leuco dye, which is radiolytically oxidized to a dye absorbing at 633 nm. Since this chemical dosimeter is single-use, it represents a significant expense. The purpose of this research is to develop a cost-effective reusable dosimeter formulation. Based on prior reusability studies, three promising dosimeter formulations were studied using small volume optical cuvettes and irradiated to known clinically relevant doses of 0.5–10 Gy. After irradiation, the change in optical density was measured in a spectrophotometer. All three formulations retained linearity of optical density response to radiation upon re-irradiations. However, only one formulation retained dose sensitivity upon at least five re-irradiations, making it ideal for further evaluation as a 3D dosimeter.

scholarly journals Commissioning of total body irradiation using plastic bead bags

2020 ◽  
Vol 61 (6) ◽  
pp. 959-968
Author(s):  
Yuichi Akino ◽  
Shintaro Maruoka ◽  
Katsuyuki Yano ◽  
Hiroshi Abe ◽  
Fumiaki Isohashi ◽  
...  
Keyword(s):  
Total Body Irradiation ◽  
Scatter Correction ◽  
Effective Density ◽  
Planning System ◽  
Whole Body ◽  
Treatment Planning System ◽  
In Vivo Dosimetry ◽  
Total Body ◽  
Plastic Bead

Abstract The goal of total body irradiation (TBI) is to deliver a dose to the whole body with uniformity within ±10%. The purpose of this study was to establish the technique of TBI using plastic bead bags. A lifting TBI bed, Model ORP-TBI-MN, was used. The space between the patient’s body and the acrylic walls of the bed was filled with polyacetal bead bags. Patients were irradiated by a 10 MV photon beam with a source to mid-plane distance of 400 cm. The monitor unit (MU) was calculated by dose-per-MU, tissue-phantom-ratio and a spoiler factor measured in solid water using an ionization chamber. The phantom-scatter correction factor, off-center ratio and the effective density of the beads were also measured. Diode detectors were used for in vivo dosimetry (IVD). The effective density of the beads was 0.90 ± 0.09. The point doses calculated in an I’mRT phantom with and without heterogeneity material showed good agreement, with measurements within 3%. An end-to-end test was performed using a RANDO phantom. The mean ± SD (range) of the differences between the calculated and IVD-measured mid-plane doses was 1.1 ± 4.8% (−5.9 to 5.0%). The differences between the IVD-measured doses and the doses calculated with Acuros XB of the Eclipse treatment planning system (TPS) were within 5%. For two patients treated with this method, the differences between the calculated and IVD-measured doses were within ±6% when excluding the chest region. We have established the technique of TBI using plastic bead bags. The TPS may be useful to roughly estimate patient dose.

A dosimetric evaluation of a novel technique using abutted radiation fields for myeloablative total body irradiation

2020 ◽  
pp. 1-8
Author(s):  
Arun Chairmadurai ◽  
Raghul Ramiya Jayabalan ◽  
Thirumal Mani ◽  
Abhishek Gulia ◽  
Hari Mohan Agrawal ◽  
...  
Keyword(s):  
Total Body Irradiation ◽  
Treatment Time ◽  
Planning System ◽  
Whole Body ◽  
Treatment Planning System ◽  
Large Field ◽  
Medical Systems ◽  
Novel Technique ◽  
Radiation Fields ◽  
Total Body

Abstract Background: The present study reports myeloablative total body irradiation (TBI) on an isocentrically mounted linac by laying the patient on the floor and management of abutting radiation fields and partial shielding of lungs. Dosimetrical efficacy of this novel technique was evaluated. Materials and methods: In this retrospective study, dosimetrical parameters from TBI plans on whole-body CT scans of 46 patients were analysed. The prescribed dose to TBI was 12 Gy in six fractions delivered over a period of 3 days for myeloablative conditioning. TrueBeam STx platform Linac (Varian Medical Systems Inc., Palo Alto, CA, USA) was used to deliver opposing fields. Radiation fields were abutted to form a single large field using an arithmetic formula at source-to-skin-distance of 210 cm. Results: Discrepancies in dose calculated by treatment planning system were within 1·6% accuracy, and dose profile at the junction of abutting radiation fields was reproduced within 3·0% accuracy. The real treatment time for each patient was ~30 minutes/fraction. Monitor unit was weighted for multiple sub-fields to achieve dose homogeneity within 5·0% throughout the whole body, and the mean dose to lung was ≤10 Gy. Conclusion: Our abutting radiation field technique for myeloablative TBI is feasible in any existing linac bunker. ‘Island-blocking’ is feasible in this technique using multi-leaf collimator. This technique is cost-effective as it does not require any costly equipment than the readily available equipment in any radiotherapy facility. In general, TBI requires laborious planning procedures and spacious linac bunkers; this novel technique has the potential to change previously held notions.

Sign in / Sign up

Export Citation Format

Share Document