SU-C-108-06: Monte Carlo Simulations for Trajectory-Based Beam Delivery in Varian TrueBeam Developer Mode

2013 ◽  
Vol 40 (6Part2) ◽  
pp. 87-87 ◽  
Author(s):  
T Teke ◽  
E Gete ◽  
C Duzenli ◽  
S McAvoy ◽  
I Popescu
2016 ◽  
Vol 69 (5) ◽  
pp. 868-874
Author(s):  
Ilsung Cho ◽  
SeungHoon Yoo ◽  
Sungho Cho ◽  
Eun Ho Kim ◽  
Yongkeun Song ◽  
...  

Author(s):  
Shiqin Su ◽  
Parmveer Atwal ◽  
Julio Lobo ◽  
Cheryl Duzenli ◽  
I Antoniu Popescu

Abstract The purpose of this study is to present a novel method for generating Monte Carlo 4D dose distributions in a single DOSXYZnrc simulation. During a standard simulation, individual energy deposition events are summed up to generate a 3D dose distribution and their associated temporal information is discarded. This means that in order to determine dose distributions as a function of time, separate simulations would have to be run for each interval of interest. Consequently, it has not been clinically feasible until now to routinely perform Monte Carlo simulations of dose rate, time-resolved dose accumulation, or EPID cine-mode images for VMAT plans. To overcome this limitation, we modified DOSXYZnrc and defined new input and output variables that allow a time-like parameter associated with each particle history to be binned in a user-defined manner. Under the new code version, computation times are the same as for a standard simulation, and the time-integrated 4D dose is identical to the standard 3D dose. We present a comparison of scintillator measurements and Monte Carlo simulations for dose rate during a VMAT beam delivery, a study of dose rate in a VMAT Total Body Irradiation plan, and simulations of transit (through-patient) EPID cine-mode images.


Author(s):  
Matthew T. Johnson ◽  
Ian M. Anderson ◽  
Jim Bentley ◽  
C. Barry Carter

Energy-dispersive X-ray spectrometry (EDS) performed at low (≤ 5 kV) accelerating voltages in the SEM has the potential for providing quantitative microanalytical information with a spatial resolution of ∼100 nm. In the present work, EDS analyses were performed on magnesium ferrite spinel [(MgxFe1−x)Fe2O4] dendrites embedded in a MgO matrix, as shown in Fig. 1. spatial resolution of X-ray microanalysis at conventional accelerating voltages is insufficient for the quantitative analysis of these dendrites, which have widths of the order of a few hundred nanometers, without deconvolution of contributions from the MgO matrix. However, Monte Carlo simulations indicate that the interaction volume for MgFe2O4 is ∼150 nm at 3 kV accelerating voltage and therefore sufficient to analyze the dendrites without matrix contributions.Single-crystal {001}-oriented MgO was reacted with hematite (Fe2O3) powder for 6 h at 1450°C in air and furnace cooled. The specimen was then cleaved to expose a clean cross-section suitable for microanalysis.


1979 ◽  
Vol 40 (C7) ◽  
pp. C7-63-C7-64
Author(s):  
A. J. Davies ◽  
J. Dutton ◽  
C. J. Evans ◽  
A. Goodings ◽  
P.K. Stewart

Sign in / Sign up

Export Citation Format

Share Document