Validation of an image simulation technique for two computed radiography systems: An application to neonatal imaging

2010 ◽  
Vol 37 (5) ◽  
pp. 2092-2100 ◽  
Author(s):  
Kristien Smans ◽  
Dirk Vandenbroucke ◽  
Herman Pauwels ◽  
Lara Struelens ◽  
Filip Vanhavere ◽  
...  
Keyword(s):  
Computed Radiography ◽  
Simulation Technique ◽  
Image Simulation ◽  
Neonatal Imaging

Determination of the Burgers vector of a dislocation in a Fe-Mn alloy by weak-beam image in HVEM

1978 ◽  
Vol 36 (1) ◽  
pp. 330-331
Author(s):  
Y. Ishida ◽  
H. Ishida ◽  
K. Kohra ◽  
H. Ichinose
Keyword(s):  
High Order ◽  
Simulation Technique ◽  
The Other ◽  
Image Simulation ◽  
Diffraction Vector ◽  
Burgers Vector ◽  
Weak Beam ◽  
Beam Image ◽  
Edge Component

IntroductionA simple and accurate technique to determine the Burgers vector of a dislocation has become feasible with the advent of HVEM. The conventional image vanishing technique(1) using Bragg conditions with the diffraction vector perpendicular to the Burgers vector suffers from various drawbacks; The dislocation image appears even when the g.b = 0 criterion is satisfied, if the edge component of the dislocation is large. On the other hand, the image disappears for certain high order diffractions even when g.b ≠ 0. Furthermore, the determination of the magnitude of the Burgers vector is not easy with the criterion. Recent image simulation technique is free from the ambiguities but require too many parameters for the computation. The weak-beam “fringe counting” technique investigated in the present study is immune from the problems. Even the magnitude of the Burgers vector is determined from the number of the terminating thickness fringes at the exit of the dislocation in wedge shaped foil surfaces.

Electro-Optical Frequency Mapping Phase Image Simulation Technique for Failure Analysis

2017 ◽  
Author(s):  
Junpei Nonaka ◽  
Nakaba Matsui ◽  
Seiichi Honbu ◽  
Kazuki Shigeta ◽  
Yukihisa Funatsu
Keyword(s):  
Failure Analysis ◽  
Simulation Method ◽  
Simulation Technique ◽  
Phase Image ◽  
Optical Frequency ◽  
Image Simulation ◽  
Circuit Layout ◽  
Phase Images ◽  
Logic Cells

Abstract We propose a phase image simulation method for Electro-Optical Frequency Mapping (EOFM). The proposed method eases the matching of phase images and circuit layout data, which was previously difficult because phase images are very complex. Physical failure analysis based on this matching result is enabled. Further works are required for understandings of simulated phase images in compound logic cells having many states or high-Z states.

Phosphor plate computed radiography: Response to variation in mAs at fixed kVp in an animal model. Potential role in neonatal imaging

1993 ◽  
Vol 47 (1) ◽  
pp. 39-45 ◽  
Author(s):  
N.J. Broderick ◽  
B. Long ◽  
R.G. Dreesen ◽  
M.D. Cohen ◽  
D.A. Cory ◽  
...  
Keyword(s):  
Animal Model ◽  
Potential Role ◽  
Computed Radiography ◽  
Model Potential ◽  
Phosphor Plate ◽  
Neonatal Imaging

Simulation of high-resolution annular dark field STEM images

1995 ◽  
Vol 53 ◽  
pp. 40-41
Author(s):  
E. J. Kirkland
Keyword(s):  
Electron Beam ◽  
Atomic Layer ◽  
Fresnel Diffraction ◽  
Dark Field ◽  
Objective Lens ◽  
Image Simulation ◽  
Small Probe ◽  
Annular Dark Field ◽  
Stem Image ◽  
Uniform Plane

In a STEM an electron beam is focused into a small probe on the specimen. This probe is raster scanned across the specimen to form an image from the electrons transmitted through the specimen. The objective lens is positioned before the specimen instead of after the specimen as in a CTEM. Because the probe is focused and scanned before the specimen, accurate annular dark field (ADF) STEM image simulation is more difficult than CTEM simulation. Instead of an incident uniform plane wave, ADF-STEM simulation starts with a probe wavefunction focused at a specified position on the specimen. The wavefunction is then propagated through the specimen one atomic layer (or slice) at a time with Fresnel diffraction between slices using the multislice method. After passing through the specimen the wavefunction is diffracted onto the detector. The ADF signal for one position of the probe is formed by integrating all electrons scattered outside of an inner angle large compared with the objective aperture.

The quantitative comparison of experimental and simulated diffraction contrast images

1995 ◽  
Vol 53 ◽  
pp. 102-103
Author(s):  
Stuart McKernan
Keyword(s):  
Image Processing ◽  
Personal Computer ◽  
Close Agreement ◽  
Quantitative Comparison ◽  
Image Simulation ◽  
Computing Power ◽  
Diffraction Contrast ◽  
Simulated Images ◽  
Made In

For many years the concept of quantitative diffraction contrast experiments might have consisted of the determination of dislocation Burgers vectors using a g.b = 0 criterion from several different 2-beam images. Since the advent of the personal computer revolution, the available computing power for performing image-processing and image-simulation calculations is enormous and ubiquitous. Several programs now exist to perform simulations of diffraction contrast images using various approximations. The most common approximations are the use of only 2-beams or a single systematic row to calculate the image contrast, or calculating the image using a column approximation. The increasing amount of literature showing comparisons of experimental and simulated images shows that it is possible to obtain very close agreement between the two images; although the choice of parameters used, and the assumptions made, in performing the calculation must be properly dealt with. The simulation of the images of defects in materials has, in many cases, therefore become a tractable problem.

Computers and diffraction analysis

1989 ◽  
Vol 47 ◽  
pp. 44-45
Author(s):  
J. A. Eades
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Electron Diffraction ◽  
Diffraction Analysis ◽  
Electron Diffraction Analysis ◽  
Image Simulation ◽  
Correct Interpretation ◽  
High Profile ◽  
High Resolution Images ◽  
Image Simulations

For well over two decades computers have played an important role in electron microscopy; they now pervade the whole field - as indeed they do in so many other aspects of our lives. The initial use of computers was mainly for large (as it seemed then) off-line calculations for image simulations; for example, of dislocation images.Image simulation has continued to be one of the most notable uses of computers particularly since it is essential to the correct interpretation of high resolution images. In microanalysis, too, the computer has had a rather high profile. In this case because it has been a necessary part of the equipment delivered by manufacturers. By contrast the use of computers for electron diffraction analysis has been slow to prominence. This is not to say that there has been no activity, quite the contrary; however it has not had such a great impact on the field.

Σ =13 tilt grain boundary in silicon bicrystal

1990 ◽  
Vol 48 (4) ◽  
pp. 562-563
Author(s):  
M.J. Kim ◽  
Y.L. Chen ◽  
R.W. Carpenter ◽  
J.C. Barry ◽  
G.H. Schwuttke
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Rotation Axis ◽  
Czochralski Method ◽  
High Resolution Electron Microscopy ◽  
Image Simulation ◽  
Simulation Techniques ◽  
Resolution Electron ◽  
The Common ◽  
Tilt Grain Boundary

The structure of grain boundaries (GBs) in metals, semiconductors and ceramics is of considerable interest because of their influence on physical properties. Progress in understanding the structure of grain boundaries at the atomic level has been made by high resolution electron microscopy (HREM) . In the present study, a Σ=13, (510) <001>-tilt grain boundary in silicon was characterized by HREM in conjunction with digital image processing and computer image simulation techniques.The bicrystals were grown from the melt by the Czochralski method, using preoriented seeds. Specimens for TEM observations were cut from the bicrystals perpendicular to the common rotation axis of pure tilt grain boundary, and were mechanically dimpled and then ion-milled to electron transparency. The degree of misorientation between the common <001> axis of the bicrystal was measured by CBED in a Philips EM 400ST/FEG: it was found to be less than 1 mrad. HREM was performed at 200 kV in an ISI-002B and at 400 kv in a JEM-4000EX.

Sign in / Sign up

Export Citation Format

Share Document