Remote sensing of gases by hyperspectral imaging: algorithms and results of field measurements

2012 ◽  
Author(s):  
Samer Sabbah ◽  
Peter Rusch ◽  
Jens Eichmann ◽  
Jörn-Hinnrich Gerhard ◽  
Roland Harig
Keyword(s):  
Remote Sensing ◽  
Hyperspectral Imaging ◽  
Field Measurements ◽  
Imaging Algorithms

scholarly journals Teams Invited to Test Coastal Hyperspectral Imaging Algorithms

Eos ◽  
2019 ◽  
Vol 100 ◽  
Author(s):  
Margaret McManus ◽  
Eric Hochberg
Keyword(s):  
Remote Sensing ◽  
Hyperspectral Imaging ◽  
Hyperspectral Remote Sensing ◽  
Inland Waters ◽  
Imaging Algorithms

Hyperspectral Remote Sensing of Coastal and Inland Waters Webinar; 28 May 2019

Hyperspectral Imaging Remote Sensing

2016 ◽  
Author(s):  
Dimitris Manolakis ◽  
Ronald Lockwood ◽  
Thomas Cooley
Keyword(s):  
Remote Sensing ◽  
Hyperspectral Imaging

scholarly journals Development of an Image Registration Technique for Fluvial Hyperspectral Imagery Using an Optical Flow Algorithm

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2407
Author(s):  
Hojun You ◽  
Dongsu Kim
Keyword(s):  
Remote Sensing ◽  
Image Registration ◽  
Optical Flow ◽  
Hyperspectral Imaging ◽  
Spatial Resolution ◽  
Template Matching ◽  
Hyperspectral Images ◽  
Spatial Accuracy ◽  
Flow Algorithm ◽  
Fluvial Remote Sensing

Fluvial remote sensing has been used to monitor diverse riverine properties through processes such as river bathymetry and visual detection of suspended sediment, algal blooms, and bed materials more efficiently than laborious and expensive in-situ measurements. Red–green–blue (RGB) optical sensors have been widely used in traditional fluvial remote sensing. However, owing to their three confined bands, they rely on visual inspection for qualitative assessments and are limited to performing quantitative and accurate monitoring. Recent advances in hyperspectral imaging in the fluvial domain have enabled hyperspectral images to be geared with more than 150 spectral bands. Thus, various riverine properties can be quantitatively characterized using sensors in low-altitude unmanned aerial vehicles (UAVs) with a high spatial resolution. Many efforts are ongoing to take full advantage of hyperspectral band information in fluvial research. Although geo-referenced hyperspectral images can be acquired for satellites and manned airplanes, few attempts have been made using UAVs. This is mainly because the synthesis of line-scanned images on top of image registration using UAVs is more difficult owing to the highly sensitive and heavy image driven by dense spatial resolution. Therefore, in this study, we propose a practical technique for achieving high spatial accuracy in UAV-based fluvial hyperspectral imaging through efficient image registration using an optical flow algorithm. Template matching algorithms are the most common image registration technique in RGB-based remote sensing; however, they require many calculations and can be error-prone depending on the user, as decisions regarding various parameters are required. Furthermore, the spatial accuracy of this technique needs to be verified, as it has not been widely applied to hyperspectral imagery. The proposed technique resulted in an average reduction of spatial errors by 91.9%, compared to the case where the image registration technique was not applied, and by 78.7% compared to template matching.

scholarly journals Drone-Based Remote Sensing for Research on Wind Erosion in Drylands: Possible Applications

2021 ◽  
Vol 13 (2) ◽  
pp. 283
Author(s):  
Junzhe Zhang ◽  
Wei Guo ◽  
Bo Zhou ◽  
Gregory S. Okin
Keyword(s):  
Remote Sensing ◽  
Wind Erosion ◽  
Field Measurements ◽  
Spatially Explicit ◽  
Surface Model ◽  
High Resolution Imagery ◽  
Soil Elevation ◽  
3D Photogrammetry ◽  
Using Data ◽  
Sample Set

With rapid innovations in drone, camera, and 3D photogrammetry, drone-based remote sensing can accurately and efficiently provide ultra-high resolution imagery and digital surface model (DSM) at a landscape scale. Several studies have been conducted using drone-based remote sensing to quantitatively assess the impacts of wind erosion on the vegetation communities and landforms in drylands. In this study, first, five difficulties in conducting wind erosion research through data collection from fieldwork are summarized: insufficient samples, spatial displacement with auxiliary datasets, missing volumetric information, a unidirectional view, and spatially inexplicit input. Then, five possible applications—to provide a reliable and valid sample set, to mitigate the spatial offset, to monitor soil elevation change, to evaluate the directional property of land cover, and to make spatially explicit input for ecological models—of drone-based remote sensing products are suggested. To sum up, drone-based remote sensing has become a useful method to research wind erosion in drylands, and can solve the issues caused by using data collected from fieldwork. For wind erosion research in drylands, we suggest that a drone-based remote sensing product should be used as a complement to field measurements.

scholarly journals Integration of Remote Sensing and Mexican Water Quality Monitoring System Using an Extreme Learning Machine

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4118
Author(s):  
Leonardo F. Arias-Rodriguez ◽  
Zheng Duan ◽  
José de Jesús Díaz-Torres ◽  
Mónica Basilio Hazas ◽  
Jingshui Huang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Water Quality ◽  
Extreme Learning Machine ◽  
Monitoring System ◽  
Field Measurements ◽  
Water Quality Monitoring ◽  
Quality Monitoring ◽  
Chl A ◽  
Learning Machine ◽  
Level 2

Remote Sensing, as a driver for water management decisions, needs further integration with monitoring water quality programs, especially in developing countries. Moreover, usage of remote sensing approaches has not been broadly applied in monitoring routines. Therefore, it is necessary to assess the efficacy of available sensors to complement the often limited field measurements from such programs and build models that support monitoring tasks. Here, we integrate field measurements (2013–2019) from the Mexican national water quality monitoring system (RNMCA) with data from Landsat-8 OLI, Sentinel-3 OLCI, and Sentinel-2 MSI to train an extreme learning machine (ELM), a support vector regression (SVR) and a linear regression (LR) for estimating Chlorophyll-a (Chl-a), Turbidity, Total Suspended Matter (TSM) and Secchi Disk Depth (SDD). Additionally, OLCI Level-2 Products for Chl-a and TSM are compared against the RNMCA data. We observed that OLCI Level-2 Products are poorly correlated with the RNMCA data and it is not feasible to rely only on them to support monitoring operations. However, OLCI atmospherically corrected data is useful to develop accurate models using an ELM, particularly for Turbidity (R2=0.7). We conclude that remote sensing is useful to support monitoring systems tasks, and its progressive integration will improve the quality of water quality monitoring programs.

Monitoring plastic accumulation in water hyacinths using remote sensing

2021 ◽  
Author(s):  
Niels Janssens ◽  
Lauren Biermann ◽  
Louise Schreyers ◽  
Martin Herold ◽  
Tim van Emmerik
Keyword(s):  
Remote Sensing ◽  
Seasonal Dynamics ◽  
Water Hyacinth ◽  
Naive Bayes ◽  
Pearson Correlation ◽  
Field Measurements ◽  
Naïve Bayes ◽  
Plastic Waste ◽  
Water Hyacinths ◽  
Sentinel 2

<p>While efforts to quantify plastic waste accumulation in the marine environment are rapidly increasing, the data on plastic transport in rivers are relatively scarce. Rivers are a major source of plastic waste into the oceans and understanding seasonal dynamics of macroplastic transport is necessary to develop effective mitigation measures. Macroplastic transport in rivers varies significantly throughout the year. Research shows that in the case of the Saigon river, Vietnam, these plastic transport fluxes are mainly correlated to the amount of organic debris (mostly water hyacinths). Since large water hyacinths patches can be monitored from space, this gives the opportunity for large scale monitoring using freely available remote sensing products. Remote sensing products, such as Sentinel-2, can be applied to areas where water hyacinths occur and plastic emissions are estimated to be high. In this study, we present a first method to detect and monitor water hyacinths using optical remote sensing. This was done by developing an algorithm to automatically detect and quantify water hyacinth coverage for a large section of the Saigon river in Vietnam, for the year 2018. Spectral signatures of water,  infrastructure in the river, and water hyacinths were used to classify the water hyacinths coverage and dynamics using a Naive Bayes algorithm. Water hyacinths were promisingly identified with 95% accuracy by the Naive Bayes classifier. The comparison between the seasonal dynamics of classified water hyacinth and seasonal dynamics of the field measurements resulted in an overall Pearson correlation of 0.72. The comparison we attempted between seasonal dynamics of plastics from satellite and field measurements yielded a Pearson correlation of 0.48. With the next field campaign collecting in-situ data matched to satellite overpasses, we aim to improve this. In conclusion, we were able to successfully map seasonal dynamics of water hyacinth in an automated way using Sentinel-2 data. Our study provides the first step in exploring the possibilities of mapping water hyacinth from satellite as a proxy for river plastics.</p>

Remote sensing of gases by hyperspectral imaging: results of measurements in the Hamburg port area

2011 ◽  
Author(s):  
Samer Sabbah ◽  
Peter Rusch ◽  
Jörn-Hinnrich Gerhard ◽  
Christian Stöckling ◽  
Jens Eichmann ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Hyperspectral Imaging ◽  
Port Area ◽  
Imaging Results

scholarly journals Accuracies Achieved in Classifying Five Leading World Crop Types and their Growth Stages Using Optimal Earth Observing-1 Hyperion Hyperspectral Narrowbands on Google Earth Engine

2018 ◽  
Vol 10 (12) ◽  
pp. 2027 ◽  
Author(s):  
Itiya Aneece ◽  
Prasad Thenkabail
Keyword(s):  
United States ◽  
Remote Sensing ◽  
Hyperspectral Imaging ◽  
The United States ◽  
Google Earth ◽  
Growth Stages ◽  
Agricultural Crops ◽  
Spectral Library ◽  
Crop Types ◽  
Google Earth Engine

As the global population increases, we face increasing demand for food and nutrition. Remote sensing can help monitor food availability to assess global food security rapidly and accurately enough to inform decision-making. However, advances in remote sensing technology are still often limited to multispectral broadband sensors. Although these sensors have many applications, they can be limited in studying agricultural crop characteristics such as differentiating crop types and their growth stages with a high degree of accuracy and detail. In contrast, hyperspectral data contain continuous narrowbands that provide data in terms of spectral signatures rather than a few data points along the spectrum, and hence can help advance the study of crop characteristics. To better understand and advance this idea, we conducted a detailed study of five leading world crops (corn, soybean, winter wheat, rice, and cotton) that occupy 75% and 54% of principal crop areas in the United States and the world respectively. The study was conducted in seven agroecological zones of the United States using 99 Earth Observing-1 (EO-1) Hyperion hyperspectral images from 2008–2015 at 30 m resolution. The authors first developed a first-of-its-kind comprehensive Hyperion-derived Hyperspectral Imaging Spectral Library of Agricultural crops (HISA) of these crops in the US based on USDA Cropland Data Layer (CDL) reference data. Principal Component Analysis was used to eliminate redundant bands by using factor loadings to determine which bands most influenced the first few principal components. This resulted in the establishment of 30 optimal hyperspectral narrowbands (OHNBs) for the study of agricultural crops. The rest of the 242 Hyperion HNBs were redundant, uncalibrated, or noisy. Crop types and crop growth stages were classified using linear discriminant analysis (LDA) and support vector machines (SVM) in the Google Earth Engine cloud computing platform using the 30 optimal HNBs (OHNBs). The best overall accuracies were between 75% to 95% in classifying crop types and their growth stages, which were achieved using 15–20 HNBs in the majority of cases. However, in complex cases (e.g., 4 or more crops in a Hyperion image) 25–30 HNBs were required to achieve optimal accuracies. Beyond 25–30 bands, accuracies asymptote. This research makes a significant contribution towards understanding modeling, mapping, and monitoring agricultural crops using data from upcoming hyperspectral satellites, such as NASA’s Surface Biology and Geology mission (formerly HyspIRI mission) and the recently launched HysIS (Indian Hyperspectral Imaging Satellite, 55 bands over 400–950 nm in VNIR and 165 bands over 900–2500 nm in SWIR), and contributions in advancing the building of a novel, first-of-its-kind global hyperspectral imaging spectral-library of agricultural crops (GHISA: www.usgs.gov/WGSC/GHISA).

scholarly journals Local spatial structure of forest biomass and its consequences for remote sensing of carbon stocks

2014 ◽  
Vol 11 (23) ◽  
pp. 6827-6840 ◽  
Author(s):  
M. Réjou-Méchain ◽  
H. C. Muller-Landau ◽  
M. Detto ◽  
S. C. Thomas ◽  
T. Le Toan ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Spatial Variability ◽  
Spatial Scales ◽  
Forest Biomass ◽  
Remote Sensing Data ◽  
Field Measurements ◽  
Forest Degradation ◽  
Forest Carbon ◽  
Mitigation Strategies ◽  
Large Plot

Abstract. Advances in forest carbon mapping have the potential to greatly reduce uncertainties in the global carbon budget and to facilitate effective emissions mitigation strategies such as REDD+ (Reducing Emissions from Deforestation and Forest Degradation). Though broad-scale mapping is based primarily on remote sensing data, the accuracy of resulting forest carbon stock estimates depends critically on the quality of field measurements and calibration procedures. The mismatch in spatial scales between field inventory plots and larger pixels of current and planned remote sensing products for forest biomass mapping is of particular concern, as it has the potential to introduce errors, especially if forest biomass shows strong local spatial variation. Here, we used 30 large (8–50 ha) globally distributed permanent forest plots to quantify the spatial variability in aboveground biomass density (AGBD in Mg ha–1) at spatial scales ranging from 5 to 250 m (0.025–6.25 ha), and to evaluate the implications of this variability for calibrating remote sensing products using simulated remote sensing footprints. We found that local spatial variability in AGBD is large for standard plot sizes, averaging 46.3% for replicate 0.1 ha subplots within a single large plot, and 16.6% for 1 ha subplots. AGBD showed weak spatial autocorrelation at distances of 20–400 m, with autocorrelation higher in sites with higher topographic variability and statistically significant in half of the sites. We further show that when field calibration plots are smaller than the remote sensing pixels, the high local spatial variability in AGBD leads to a substantial "dilution" bias in calibration parameters, a bias that cannot be removed with standard statistical methods. Our results suggest that topography should be explicitly accounted for in future sampling strategies and that much care must be taken in designing calibration schemes if remote sensing of forest carbon is to achieve its promise.

Sign in / Sign up

Export Citation Format

Share Document