Surface Structure Curves: Toward a Smooth Surface Descriptor

1990 ◽  
Author(s):  
Hiromi T. Tanaka ◽  
Daniel T. L. Lee ◽  
Yukio Kobayashi
Keyword(s):  
Surface Structure ◽  
Smooth Surface

scholarly journals Surface Geometry of Four Conventional Nanohybrid Resin-Based Composites and Four Regular Viscosity Bulk Fill Resin-Based Composites after Two-Step Polishing Procedure

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Mateusz Granat ◽  
Janusz Cieloszyk ◽  
Urszula Kowalska ◽  
Jadwiga Buczkowska-Radlińska ◽  
Ryta Łagocka
Keyword(s):  
Surface Roughness ◽  
Surface Structure ◽  
Smooth Surface ◽  
Nonparametric Tests ◽  
Matched Pair ◽  
Surface Geometry ◽  
Sem Images ◽  
Posterior Teeth ◽  
Cylindrical Mold ◽  
Slight Damage

Objectives. The aim of the study was to determine the quantitative and qualitative surface structure of contemporary RBCs in posterior teeth reconstructions: regular viscosity bulk fill and conventional composites, obtained after two-stage polishing procedure. Materials and Methods. Four conventional nanohybrid composites (Tetric EvoCeram, GrandioSO, Filtek Z550, and Ceram·X Mono) and four regular viscosity bulk fill composites (Tetric EvoCeram Bulk Fill, X-tra fil, Filtek Bulk Fill Posterior, and QuixFil) were tested. Samples of each RBC were prepared using PMMA cylindrical mold. After two-step polishing procedure, a surface geometry was evaluated under profilometry (Turbowave v. 7.36, Hommel-Etamic) and SEM (VEGA 3, Tescan Analytics). To evaluate differences between values, the following nonparametric tests were used: Friedman’s ANOVA, Wilcoxon’s matched-pair test, ANOVA Kruskal-Wallis, and Mann-Whitney U. Results. All conventional RBCs showed Ra values in the range of 0.20-0.26 μm. Bulk fill showed higher values in range of 0.49-1.36 μm except for Filtek Bulk Fill Posterior, which achieved 0.23 μm Ra value. SEM images of conventional RBCs were described as smooth surfaces with slight damage except for TEC, which presented smooth surface with no damage. Bulk fill composites showed rough surface, except for TBF, which presented smooth surface with slight damage. Conclusions. Regular viscosity bulk fill composites do not constitute a homogeneous group regarding surface roughness after polishing. They obtain, for the most part, poorer smoothness values after polishing than conventional RBCs.

scholarly journals Ultrastructure, morphology, affinities and reclassification of <i>Cassigerinella</i> Pokorný (Foraminiferida: Globigerinina)

1986 ◽  
Vol 5 (2) ◽  
pp. 49-64 ◽  
Author(s):  
Li Qianyu
Keyword(s):  
Surface Structure ◽  
Type Species ◽  
Smooth Surface ◽  
Species Group ◽  
Morphological Features ◽  
Strong Resemblance ◽  
Cone Surface

Abstract. Re-examination of Cassigerinella chipolensis (Cushman &amp; Ponton) and comparison of the ultrastructure of its morphotypes demonstrates that the species should only contain forms with a smooth surface and that those with a pore-cone surface should be distinguished as the type species, C. boudecensis Pokorný, a name which is still valid both taxonomically and stratigraphically. Strong resemblance in surface structure, aperture pattern and essential biseriality between many heterohelicids and Cassigerinella has been considered to be significant for its reclassification. Cassigerinella is, therefore, believed to have originated among the Heterohelicacea rather than in the Globigerinacea or Hantkeninacea as previously proposed by various authors. Morphological features, such as apertural modifications and coiling mode, and the characteristics of several related taxa of the species-group are discussed.

The Hoodoo: A New Surface Structure for Enhanced Boiling Heat Transfer

2013 ◽  
Vol 5 (1) ◽  
Author(s):  
Bradley Bon ◽  
James F. Klausner ◽  
Edward Mckenna
Keyword(s):  
Heat Transfer ◽  
Surface Structure ◽  
Boiling Heat Transfer ◽  
Enhancement Factor ◽  
Smooth Surface ◽  
Nucleation Site ◽  
Transfer Enhancement ◽  
Droplet Spreading ◽  
Primary Mechanism ◽  
Enhanced Boiling

The hoodoo is introduced as a beneficial surface structure for enhancing boiling heat transfer. A full parametric study was conducted to determine which attributes of the hoodoo structure promote boiling heat transfer enhancement. Hoodoo size and spacing were observed to have the most profound effect on boiling heat transfer, nucleation site activation, and critical heat flux (CHF). The CHF enhancement factor, defined as the ratio of CHF on the structured surface to that of a smooth surface, varies from 1.05 to 1.67 for FC-72 and hexane working fluids. Droplet spreading studies confirm the hemiwicking properties of the hoodoo surface, and it is postulated to be the primary mechanism for CHF enhancement. Measured wicking front speeds varied from 12 to 40 mm/s and were observed to obey a power-law dependence on time with an exponent of approximately 0.5. Plausible thermohydraulic mechanisms for CHF enhancement on the hoodoo surfaces are discussed.

Surface Structure of the Spores of Glugea Weissenbergi

1969 ◽  
Vol 27 ◽  
pp. 238-239
Author(s):  
Sanford H. Vernick ◽  
Anastasios Tousimis ◽  
Victor Sprague
Keyword(s):  
Electron Microscope ◽  
Surface Structure ◽  
Transmission Electron Microscope ◽  
Mature Spore ◽  
Spore Surface ◽  
Sectioned Material ◽  
Transmission Electron ◽  
Surface Detail

Recent electron microscope studies have greatly expanded our knowledge of the structure of the Microsporida, particularly of the developing and mature spore. Since these studies involved mainly sectioned material, they have revealed much internal detail of the spores but relatively little surface detail. This report concerns observations on the spore surface by means of the transmission electron microscope.

Surface Structure of Nucleated Animal Cells: Carbon Replicas

1967 ◽  
Vol 25 ◽  
pp. 120-121
Author(s):  
Robert M. Glaeser ◽  
Thea B. Scott
Keyword(s):  
Cell Surface ◽  
Surface Structure ◽  
Particle Diameter ◽  
Cellular Functions ◽  
Animal Cells ◽  
Replica Technique ◽  
Carbon Replica ◽  
Characteristic Particle ◽  
Cell Surface Structure ◽  
Carbon Replicas

The carbon-replica technique can be used to obtain information about cell-surface structure that cannot ordinarily be obtained by thin-section techniques. Mammalian erythrocytes have been studied by the replica technique and they appear to be characterized by a pebbly or “plaqued“ surface texture. The characteristic “particle” diameter is about 200 Å to 400 Å. We have now extended our observations on cell-surface structure to chicken and frog erythrocytes, which possess a broad range of cellular functions, and to normal rat lymphocytes and mouse ascites tumor cells, which are capable of cell division. In these experiments fresh cells were washed in Eagle's Minimum Essential Medium Salt Solution (for suspension cultures) and one volume of a 10% cell suspension was added to one volume of 2% OsO4 or 5% gluteraldehyde in 0.067 M phosphate buffer, pH 7.3. Carbon replicas were obtained by a technique similar to that employed by Glaeser et al. Figure 1 shows an electron micrograph of a carbon replica made from a chicken erythrocyte, and Figure 2 shows an enlarged portion of the same cell.

High resolution surface structure of foot-and-mouth disease virus

1978 ◽  
Vol 36 (2) ◽  
pp. 376-377
Author(s):  
S. S. Breese ◽  
H. L. Bachrach
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Surface Structure ◽  
Disease Virus ◽  
Potassium Phosphate ◽  
Foot And Mouth Disease ◽  
Mouth Disease ◽  
Physical Measurements ◽  
Mouth Disease Virus ◽  
Foot And Mouth

Models for the structure of foot-and-mouth disease virus (FMDV) have been proposed from chemical and physical measurements (Brown, et al., 1970; Talbot and Brown, 1972; Strohmaier and Adam, 1976) and from rotational image-enhancement electron microscopy (Breese, et al., 1965). In this report we examine the surface structure of FMDV particles by high resolution electron microscopy and compare it with that of particles in which the outermost capsid protein VP3 (ca. 30, 000 daltons) has been split into smaller segments, two of which VP3a and VP3b have molecular weights of about 15, 000 daltons (Bachrach, et al., 1975).Highly purified and concentrated type A12, strain 119 FMDV (5 mg/ml) was prepared as previously described (Bachrach, et al., 1964) and stored at 4°C in 0. 2 M KC1-0. 5 M potassium phosphate buffer at pH 7. 5. For electron microscopy, 1. 0 ml samples of purified virus and trypsin-treated virus were dialyzed at 4°C against 0. 2 M NH4OAC at pH 7. 3, deposited onto carbonized formvar-coated copper screens and stained with phosphotungstic acid, pH 7. 3.

Examination of Schistosome Cercariae and Schistosomules by Scanning Electron Microscopy

1969 ◽  
Vol 27 ◽  
pp. 50-51
Author(s):  
D. Johnson ◽  
P. Moriearty
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Light Microscopy ◽  
Surface Structure ◽  
Extensive Study ◽  
Scanning Microscopy ◽  
Host Parasite ◽  
Conventional Electron Microscopy ◽  
Scanning Electron

Since several species of Schistosoma, or blood fluke, parasitize man, these trematodes have been subjected to extensive study. Light microscopy and conventional electron microscopy have yielded much information about the morphology of the various stages; however, scanning electron microscopy has been little utilized for this purpose. As the figures demonstrate, scanning microscopy is particularly helpful in studying at high resolution characteristics of surface structure, which are important in determining host-parasite relationships.

Profile Imaging of Silicon Surface Reconstructions

1985 ◽  
Vol 43 ◽  
pp. 262-263
Author(s):  
O.L. Krivanek ◽  
G.J. Wood
Keyword(s):  
Electron Microscopy ◽  
Surface Structure ◽  
Structure Determination ◽  
Silicon Surface ◽  
Good Resolution ◽  
Surface Reconstructions ◽  
Bulk Structure ◽  
Point To Point ◽  
The Relationship

Electron microscopy at 0.2nm point-to-point resolution, 10-10 torr specimei region vacuum and facilities for in-situ specimen cleaning presents intere; ing possibilities for surface structure determination. Three methods for examining the surfaces are available: reflection (REM), transmission (TEM) and profile imaging. Profile imaging is particularly useful because it giv good resolution perpendicular as well as parallel to the surface, and can therefore be used to determine the relationship between the surface and the bulk structure.

Three-Dimensional Structure of Rotavirus-Fab Complex

1990 ◽  
Vol 48 (1) ◽  
pp. 238-239
Author(s):  
B.V.V. Prasad ◽  
E. Marietta ◽  
J.W. Burns ◽  
M.K. Estes ◽  
W. Chiu
Keyword(s):  
Image Processing ◽  
Smooth Surface ◽  
Three Dimensional ◽  
Outer Shell ◽  
Dimensional Structure ◽  
Structural Studies ◽  
Cell Penetration ◽  
Electron Cryomicroscopy ◽  
Image Processing Techniques ◽  
Processing Techniques

Rotaviruses are spherical, double-shelled particles. They have been identified as a major cause of infantile gastroenteritis worldwide. In our earlier studies we determined the three-dimensional structures of double-and single-shelled simian rotavirus embedded in vitreous ice using electron cryomicroscopy and image processing techniques to a resolution of 40Å. A distinctive feature of the rotavirus structure is the presence of 132 large channels spanning across both the shells at all 5- and 6-coordinated positions of a T=13ℓ icosahedral lattice. The outer shell has 60 spikes emanating from its relatively smooth surface. The inner shell, in contrast, exhibits a bristly surface made of 260 morphological units at all local and strict 3-fold axes (Fig.l).The outer shell of rotavirus is made up of two proteins, VP4 and VP7. VP7, a glycoprotein and a neutralization antigen, is the major component. VP4 has been implicated in several important functions such as cell penetration, hemagglutination, neutralization and virulence. From our earlier studies we had proposed that the spikes correspond to VP4 and the rest of the surface is composed of VP7. Our recent structural studies, using the same techniques, with monoclonal antibodies specific to VP4 have established that surface spikes are made up of VP4.

Sign in / Sign up

Export Citation Format

Share Document