Measurement Of Transient Flow Field Phenomena With A Digital Heterodyne Interferometer

1988 ◽  
Author(s):  
D. M. Swain ◽  
M. T. Jacoby ◽  
J. D. Tomassian
Keyword(s):  
Flow Field ◽  
Transient Flow ◽  
Heterodyne Interferometer

A new dynamic mesh algorithm for studying the 3D transient flow field of tilting pad journal bearings

2016 ◽  
Vol 230 (12) ◽  
pp. 1470-1482 ◽  
Author(s):  
Mengxuan Li ◽  
Chaohua Gu ◽  
Xiaohong Pan ◽  
Shuiying Zheng ◽  
Qiang Li
Keyword(s):  
Flow Field ◽  
Equilibrium Position ◽  
Transient Flow ◽  
Journal Bearings ◽  
Dynamic Mesh ◽  
Static Equilibrium ◽  
Time Step ◽  
Tilting Pad ◽  
Grid Nodes ◽  
Tilting Pad Journal Bearings

A new dynamic mesh algorithm is developed in this paper to realize the three-dimensional (3D) computational fluid dynamics (CFD) method for studying the small clearance transient flow field of tilting pad journal bearings (TPJBs). It is based on a structured grid, ensuring that the total number and the topology relationship of the grid nodes remain unchanged during the dynamic mesh updating process. The displacements of the grid nodes can be precisely recalculated at every time step. The updated mesh maintains high quality and is suitable for transient calculation of large journal displacement in FLUENT. The calculation results, such as the static equilibrium position and the dynamic characteristic coefficients, are consistent with the two-dimensional (2D) solution of the Reynolds equation. Furthermore, in the process of transient analysis, under conditions in which the journal is away from the static equilibrium position, evident differences appear between linearized and transient oil film forces, indicating that the nonlinear transient calculation is more suitable for studying the rotor-bearing system.

Research of transient flow field real time interferogram acquisition system

2007 ◽  
Author(s):  
Jiao Liang ◽  
Yongying Yang ◽  
Dong Liu ◽  
Yongmo Zhuo ◽  
Jianhua Hui ◽  
...  
Keyword(s):  
Flow Field ◽  
Real Time ◽  
Transient Flow ◽  
Acquisition System

scholarly journals Role of Transient Characteristics in Fish Trajectory Modeling

2020 ◽  
Author(s):  
zhu gao ◽  
zu hao zhou ◽  
Helge I Andersson
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Turbulent Flow ◽  
Transient Flow ◽  
Simultaneous Recording ◽  
Fish Locomotion ◽  
Vertical Slot ◽  
Turbulent Flow Structure ◽  
General Method

In this paper, we analyzed the live fish trajectory recorded from an experiment in an experimental vertical slot fishway. Combined with a numerical simulation, we demonstrated that randomness shown in fish trajectory might not merely be attributed to fish's random choices in its swimming, also could be an adaption consequence to the bulk unsteady turbulent flow structure. Simple superposing the fish trajectory on the time-averaged flow field obtained either by interpolating on discrete point measurements or numerical simulation is not an ideal method for fish movement description in fishway engineering. How to model the fish paths in transient flow and the necessity of simultaneous recording of the flow field and the fish locomotion are challenging topics. The suggested spectrum analysis of the flow field may provide a new general method to reproduce the fish trajectory in a complex turbulent flow.

scholarly journals Calibration Routine for Quantitative Three-Dimensional Flow Field Measurements in Drying Polymer Solutions Subject to Marangoni Convection

2019 ◽  
Vol 3 (1) ◽  
pp. 39
Author(s):  
Max Tönsmann ◽  
Fabian Kröhl ◽  
Philipp Cavadini ◽  
Philip Scharfer ◽  
Wilhelm Schabel
Keyword(s):  
Flow Field ◽  
Particle Tracking Velocimetry ◽  
Transient Flow ◽  
Marangoni Convection ◽  
Three Dimensional ◽  
Field Measurements ◽  
Calibration Procedure ◽  
Cover Glass ◽  
Spread Function ◽  
Multifocal Lens

Surface-tension induced flows may have a significant impact on the surface topography of thin films or small printed structures derived from polymer solution processing. Despite a century of research on Marangoni convection, the community lacks quantitative experimental flow field data, especially from within drying solutions. We utilize multifocal micro particle tracking velocimetry (µPTV) to obtain these data and show a calibration routine based on point spread function (PSF) simulations as well as experimental data. The results account for a varying sample refractive index, beneficial cover-glass correction collar settings as well as a multifocal lens system. Finally, the calibration procedure is utilized exemplarily to reconstruct a three-dimensional, transient flow field within a poly(vinyl acetate)-methanol solution dried with inhomogeneous boundary conditions.

scholarly journals Role of Transient Characteristics in Fish Trajectory Modeling

2020 ◽  
Vol 12 (17) ◽  
pp. 6765
Author(s):  
Gao Zhu ◽  
Zuhao Zhou ◽  
Helge I Andersson
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Transient Flow ◽  
Silver Carp ◽  
Simultaneous Recording ◽  
Trajectory Modeling ◽  
Fish Locomotion ◽  
Vertical Slot ◽  
Ideal Method

In this experiment, we analyzed live fish (silver carp) trajectories recorded in an experimental vertical-slot fishway. Combined with a numerical simulation, we demonstrated that randomness shown in fish trajectories might not merely be attributed to the fish’s random choices in its swimming, but could also be a consequence of adaption to the bulk unsteady turbulent flow structures. Simple superposition of a fish trajectory on the time-averaged flow field obtained either by interpolating on discrete point measurements or numerical simulation data is not an ideal method for description of fish movement. How to model the fish paths in transient flow and the necessity of simultaneous recording of the flow field and the fish locomotion are challenging topics. We also discussed the possible integration of currently existing methods to promote the development of fish trajectory modeling.

scholarly journals An Investigation of Surge in a High-Speed Centrifugal Compressor Using Digital PIV

2000 ◽  
Vol 123 (2) ◽  
pp. 418-428 ◽  
Author(s):  
Mark P. Wernet ◽  
Michelle M. Bright ◽  
Gary J. Skoch
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
High Speed ◽  
Transient Flow ◽  
Dynamic Pressure ◽  
Rotating Stall ◽  
Transient Pressure ◽  
Pressure Transducers ◽  
Stable Operating ◽  
Particle Imaging

Compressor stall is a catastrophic breakdown of the flow in a compressor, which can lead to a loss of engine power, large pressure transients in the inlet/nacelle, and engine flameout. The implementation of active or passive strategies for controlling rotating stall and surge can significantly extend the stable operating range of a compressor without substantially sacrificing performance. It is crucial to identify the dynamic changes occurring in the flow field prior to rotating stall and surge in order to control these events successfully. Generally, pressure transducer measurements are made to capture the transient response of a compressor prior to rotating stall. In this investigation, Digital Particle Imaging Velocimetry (DPIV) is used in conjunction with dynamic pressure transducers to capture transient velocity and pressure measurements simultaneously in the nonstationary flow field during compressor surge. DPIV is an instantaneous, planar measurement technique that is ideally suited for studying transient flow phenomena in high-speed turbomachinery and has been used previously to map the stable operating point flow field in the diffuser of a high-speed centrifugal compressor. Through the acquisition of both DPIV images and transient pressure data, the time evolution of the unsteady flow during surge is revealed.

Simplified Transient Numerical Model of a Supersonic Jet Impacting a Substrate

2017 ◽  
Author(s):  
Sichang Xu ◽  
Patrick Pomerleau-Perron ◽  
Gary W. Rankin
Keyword(s):  
Flow Field ◽  
Numerical Solutions ◽  
Transient Flow ◽  
Fluid Dynamic ◽  
Supersonic Jet ◽  
Axially Symmetric ◽  
Rotary Valve ◽  
Time Curve ◽  
Jet Impact ◽  
Impact Region

The transient flow field near the surface of a substrate impacted by a pulsating supersonic jet emerging from a long tube is investigated using a simplified axially symmetric numerical approach. In the system being modeled, the pulses are created using a rotary valve located at the tube entrance. This flow situation approximates the conditions existing in the Shock-Induced Cold Spray process for coating surfaces with metallic particles. Previous numerical studies of transient supersonic jets either focused on jets emerging from orifices or did not give details of the complex supersonic flow field in the jet impact region. The current approximate numerical method considers the flow within the long tube and in the jet impact region. The procedure involves two stages. The upstream pressure variation with time is first determined using a one-dimensional compressible flow approximation of the entire tube and rotary valve arrangement. The resulting pressure versus time curve serves as the transient inlet boundary condition for an axially symmetric computational fluid dynamic solution of the flow through the tube and region of jet impact on the substrate. The numerical solutions of substrate pressure on the jet centerline versus time are compared with available experimental results and predict certain general features of the substrate pressure traces. Although the simplified model is only in fair agreement with some aspects of the experimental curves, it is shown to be useful in explaining certain peculiar flow features. With the aid of the numerical solution, an explanation for the movement and instability of the bow shock wave which forms ahead of the substrate is described.

Transient Flow Field on Containment Floor Predicted by Two-Dimensional Shallow Equation Solver

2009 ◽  
Author(s):  
Young Seok Bang ◽  
Gil-Soo Lee ◽  
Byung-Gil Huh ◽  
Deog-Yeon Oh ◽  
Sweng-Woong Woo
Keyword(s):  
Flow Field ◽  
Transient Flow ◽  
Complex Geometry ◽  
Solid Wall ◽  
Shallow Water Equation ◽  
Water Reservoir ◽  
Two Dimensional ◽  
Pressurized Water ◽  
Fast Running ◽  
Propagation Of Waves

For the analysis of debris transport on containment floor, a model to predict the flow field should have a fast-running capability and high accuracy. A model is developed to calculate the transient flow field on the containment floor involving a complex geometry in the advanced pressurized water reactor (PWR) such as Advanced Power Reactor (APR)-1400, which does not have a switchover from injection to recirculation following a loss-of-coolant accident (LOCA). Two-dimensional shallow water equation (SWE) is solved using the finite volume method (FVM). Unstructured triangular meshes are used to simulate the complex structures on the containment floor. Harten-Lax-van Leer (HLL) scheme, one of the approximate Riemann solver, is adopted to capture the dry-wet interface and to determine the momentum flux at the interface. An experiment of a sudden dam break having water reservoir and L-shape open channel is simulated and compared with the calculated result, which supports the validity of the present model. The model is also applied to calculation of the flow field of APR-1400. The calculated flow field can be characterized by the propagation of waves generated by surface level difference and by the reflection of waves from solid wall. The transient flow rates entering to the Holdup Volume Tank (HVT) can be predicted within a practical limit of computational resource.

Theoretical and Experimental Investigation on the Flow Induced Vibrations of a Centrifugal Pump

2004 ◽  
Author(s):  
Friedrich-Karl Benra ◽  
Hans Josef Dohmen
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Transient Flow ◽  
Stokes Equations ◽  
Computer Code ◽  
Numerical Approach ◽  
Experimental Investigations ◽  
Pump Operation ◽  
Pump Rotor ◽  
Wide Range

The transport of fluids which include a lot of impurities is often done by special single-stage pumps. In order to avoid clogging of the pumps, the impellers have only one blade. This minimum blade number brings strong disadvantages during the pump operation. The rotation of the impeller in the pump casing produces a strongly uneven pressure field along the perimeter of the casing. The resulting periodically unsteady flow forces affect the impeller and produce radial deflections of the pump shaft which can be recognized as vibrations at the bearing blocks or at the pump casing. These vibrations will also be transferred to the pump casing and attached pipes. In a numerical approach the hydrodynamic excitation forces of a single-blade pump were calculated from the time dependent flow field. The flow field is known from the numerical simulation of the three-dimensional, viscous, unsteady flow in the pump by using a commercial computer code determining the Reynolds averaged Navier-Stokes equations (URANS). The periodically unsteady flow forces were computed for a complete impeller revolution. This forces affect the rotor of the pump and stimulate it to oscillations. The computed forces were defined as external forces and applied as the load on the rotor for a structural analysis. The resulting oscillations of the rotor were calculated by a transient analysis of the rotors structure using a commercial FEM-Method. To verify the calculated results, experimental investigations have been performed. The deflections of the pump rotor were measured with proximity sensors in a wide range of pump operation. Measurements of the vibration accelerations at the pump casing showed the visible effects of the transient flow. To minimize the vibration amplitudes the energizing forces have been reduced by attaching a compensation mass at the impeller. This procedure can be used as “operational balancing” of the pump rotor for a certain point of operation.

Sign in / Sign up

Export Citation Format

Share Document