Optical fiber evanescent absorption sensors for high-temperature gas sensing in advanced coal-fired power plants

2012 ◽  
Author(s):  
Michael P. Buric ◽  
Paul R. Ohodnicky ◽  
Janice Duy
Keyword(s):  
High Temperature ◽  
Optical Fiber ◽  
Power Plants ◽  
Gas Sensing ◽  
High Temperature Gas

scholarly journals Study on Probabilistic Safety Goals for Multimodule High-Temperature Gas-Cooled Reactor Based on Chinese Societal Risks

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jinghan Zhang ◽  
Jun Zhao ◽  
Jiejuan Tong
Keyword(s):  
High Temperature ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Regulatory Commission ◽  
Nuclear Safety ◽  
Energy Agency ◽  
Water Reactor ◽  
Regulatory Commission ◽  
High Temperature Gas ◽  
Probabilistic Safety

Nuclear safety goal is the basic standard for limiting the operational risks of nuclear power plants. The statistics of societal risks are the basis for nuclear safety goals. Core damage frequency (CDF) and large early release frequency (LERF) are typical probabilistic safety goals that are used in the regulation of water-cooled reactors currently. In fact, Chinese current probabilistic safety goals refer to the Nuclear Regulatory Commission (NRC) and the International Atomic Energy Agency (IAEA), and they are not based on Chinese societal risks. And the CDF and LERF proposed for water reactor are not suitable for high-temperature gas-cooled reactors (HTGR), because the design of HTGR is very different from that of water reactor. And current nuclear safety goals are established for single reactor rather than unit or site. Therefore, in this paper, the development of the safety goal of NRC was investigated firstly; then, the societal risks in China were investigated in order to establish the correlation between the probabilistic safety goal of multimodule HTGR and Chinese societal risks. In the end, some other matters about multireactor site were discussed in detail.

Thermodynamic Analysis of Power Generation Cycles With High-Temperature Gas-Cooled Nuclear Reactor and Additional Coolant Heating Up to 1600 °C

2018 ◽  
Vol 140 (2) ◽  
Author(s):  
Michał Dudek ◽  
Zygmunt Kolenda ◽  
Marek Jaszczur ◽  
Wojciech Stanek
Keyword(s):  
Energy Efficiency ◽  
High Temperature ◽  
Thermodynamic Analysis ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Electric Energy ◽  
High Energy ◽  
Medium Size ◽  
Outlet Temperature ◽  
High Temperature Gas

Nuclear energy is one of the possibilities ensuring energy security, environmental protection, and high energy efficiency. Among many newest solutions, special attention is paid to the medium size high-temperature gas-cooled reactors (HTGR) with wide possible applications in electric energy production and district heating systems. Actual progress can be observed in the literature and especially in new projects. The maximum outlet temperature of helium as the reactor cooling gas is about 1000 °C which results in the relatively low energy efficiency of the cycle not greater than 40–45% in comparison to 55–60% of modern conventional power plants fueled by natural gas or coal. A significant increase of energy efficiency of HTGR cycles can be achieved with the increase of helium temperature from the nuclear reactor using additional coolant heating even up to 1600 °C in heat exchanger/gas burner located before gas turbine. In this paper, new solution with additional coolant heating is presented. Thermodynamic analysis of the proposed solution with a comparison to the classical HTGR cycle will be presented showing a significant increase of energy efficiency up to about 66%.

scholarly journals Using Wireless Sensor Networks to Achieve Intelligent Monitoring for High-Temperature Gas-Cooled Reactor

2017 ◽  
Vol 2017 ◽  
pp. 1-8
Author(s):  
Jianghai Li ◽  
Jia Meng ◽  
Xiaojing Kang ◽  
Zhenhai Long ◽  
Xiaojin Huang
Keyword(s):  
High Temperature ◽  
Nuclear Power ◽  
Power Plants ◽  
Heterogeneous Data ◽  
Wireless Sensor ◽  
Support Vector ◽  
Intelligent Monitoring ◽  
Novel Algorithms ◽  
Non Gaussian ◽  
High Temperature Gas

High-temperature gas-cooled reactors (HTGR) can incorporate wireless sensor network (WSN) technology to improve safety and economic competitiveness. WSN has great potential in monitoring the equipment and processes within nuclear power plants (NPPs). This technology not only reduces the cost of regular monitoring but also enables intelligent monitoring. In intelligent monitoring, large sets of heterogeneous data collected by the WSN can be used to optimize the operation and maintenance of the HTGR. In this paper, WSN-based intelligent monitoring schemes that are specific for applications of HTGR are proposed. Three major concerns regarding wireless technology in HTGR are addressed: wireless devices interference, cybersecurity of wireless networks, and wireless standards selected for wireless platform. To process nonlinear and non-Gaussian data obtained by WSN for fault diagnosis, novel algorithms combining Kernel Entropy Component Analysis (KECA) and support vector machine (SVM) are developed.

A Nodal Dynamic Model for Control System Simulation of the HTR-PM Reactor Core

2010 ◽  
Author(s):  
Zhe Dong ◽  
Xiaojin Huang ◽  
Liangju Zhang
Keyword(s):  
Control System ◽  
High Temperature ◽  
Power Distribution ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Pebble Bed ◽  
Nodal Model ◽  
High Temperature Gas

The modular high-temperature gas-cooled nuclear reactor (MHTGR) is seen as one of the best candidates for the next generation of nuclear power plants. China began to research the MHTGR technology at the end of the 1970s, and a 10 MWth pebble-bed high temperature reactor HTR-10 has been built. On the basis of the design and operation of the HTR-10, the high temperature gas-cooled reactor pebble-bed module (HTR-PM) project is proposed. One of the main differences between the HTR-PM and HTR-10 is that the ratio of height to diameter corresponding to the core of the HTR-PM is much larger than that of the HTR-10. Therefore it is not proper to use the point kinetics based model for control system design and verification. Motivated by this, a nodal neutron kinetics model for the HTR-PM is derived, and the corresponding nodal thermal-hydraulic model is also established. This newly developed nodal model can reflect not only the total or average information but also the distribution information such as the power distribution as well. Numerical simulation results show that the static precision of the new core model is satisfactory, and the trend of the transient responses is consistent with physical rules.

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Radiocarbon ◽  
2019 ◽  
Vol 61 (5) ◽  
pp. 1169-1183 ◽  
Author(s):  
X Liu ◽  
W Peng ◽  
L Wei ◽  
M Lou ◽  
F Xie ◽  
...  
Keyword(s):  
High Temperature ◽  
Power Plants ◽  
Activity Concentration ◽  
Specific Activity ◽  
Theoretical Calculations ◽  
Total Porosity ◽  
Sensitivity Study ◽  
Human Beings ◽  
Primary Coolant ◽  
High Temperature Gas

ABSTRACTWhile assessing the environmental impact of nuclear power plants, researchers have focused their attention on radiocarbon (14C) owing to its high mobility in the environment and important radiological impact on human beings. The 10 MW high-temperature gas-cooled reactor (HTR-10) is the first pebble-bed gas-cooled test reactor in China that adopted helium as primary coolant and graphite spheres containing tristructural-isotropic (TRISO) coated particles as fuel elements. A series of experiments on the 14C source terms in HTR-10 was conducted: (1) measurement of the specific activity and distribution of typical nuclides in the irradiated graphite spheres from the core, (2) measurement of the activity concentration of 14C in the primary coolant, and (3) measurement of the amount of 14C discharged in the effluent from the stack. All experimental data on 14C available for HTR-10 were summarized and analyzed using theoretical calculations. A sensitivity study on the total porosity, open porosity, and percentage of closed pores that became open after irradiating the matrix graphite was performed to illustrate their effects on the activity concentration of 14C in the primary coolant and activity amount of 14C in various deduction routes.

Sign in / Sign up

Export Citation Format

Share Document