Active optics: deformation systems compensating for optical aberrations with a minimum number of actuators

2012 ◽  
Author(s):  
Marie Laslandes ◽  
Emmanuel Hugot ◽  
Marc Ferrari
Keyword(s):  
Optical Aberrations ◽  
Active Optics ◽  
Minimum Number

scholarly journals Active optics in astronomy – modeling of deformable substrates: freeform surfaces for FIREBall and MESSIER

2018 ◽  
Vol 27 (5-6) ◽  
Author(s):  
Gérard Rene Lemaitre
Keyword(s):  
Adaptive Optics ◽  
Large Scale ◽  
Wide Field ◽  
Freeform Surfaces ◽  
Aspheric Surfaces ◽  
Massive Black Holes ◽  
Active Optics ◽  
Minimum Number ◽  
Co Addition ◽  
Large Telescopes

AbstractActive optics techniques on large telescopes and astronomical instrumentations provide high imaging quality. For ground-based astronomy, the co-addition of adaptive optics again increases angular resolution up to providing diffraction-limited imaging at least in the infrared. Active and adaptive optics marked milestone progress in the detection of exoplanets, super-massive black holes, and large-scale structure of galaxies. This paper is dedicated to highly deformable active optics that can generate non-axisymmetric aspheric surfaces – or freeform surfaces – by use of a minimum number of actuators: a single uniform load acts over the surface of a vase-form substrate whilst under reaction to its elliptical perimeter ring. Two such instruments are presented: (1) the Faint Intergalactic Redshifted Emission Balloon (FIREBall) telescope and multi object spectrograph (MOS) where the freeform reflective diffraction grating is generated by replication of a deformable master grating, and (2) the MESSIER wide-field low-central-obstruction three-mirror-anastigmat (TMA) telescope proposal where the freeform mirror is generated by stress figuring and elastic relaxation. Freeform surfaces were obtained by plane super-polishing. Preliminary analysis required use of the optics theory of 3rd-order aberrations and elasticity theory of thin elliptical plates. Final cross-optimizations were carried out with Zemax raytracing code and Nastran FEA elasticity code in order to determine geometry of the deformable substrates.

scholarly journals Active optics with a minimum number of actuators

2014 ◽  
Vol 3 (3) ◽  
Author(s):  
Gerard R. Lemaitre
Keyword(s):  
Adaptive Optics ◽  
Thin Plate ◽  
Shell Theory ◽  
Plate Theory ◽  
Surface Elasticity ◽  
Optical Systems ◽  
X Rays ◽  
Active Optics ◽  
Thin Plate Theory ◽  
Minimum Number

AbstractOptics for astronomy implies powerful developments of active and adaptive optics methods applied to instrumentation from X-rays to the near infrared for the design of telescopes, spectrographs, and coronagraph planet finders. This presentation particularly emphasizes the development of active optics methods. Highly accurate and remarkably smooth surfaces from active optics methods allow new optical systems that use highly aspheric and non-axisymmetric – freeform – surfaces. Depending on the goal and performance required for a deformable optical surface, elasticity theory analysis is carried out either with small deformation thin plate theory, large deformation thin plate theory, shallow spherical shell theory, or the weakly conical shell theory. A mirror thickness distribution is then determined as a function of associated bending actuators and boundary conditions. For a given optical shape to generate, one searches for optical solutions with a minimum number of actuators.

scholarly journals Active Optics in Astronomy: Freeform Mirror for the MESSIER Telescope Proposal

2018 ◽  
Vol 24 (1) ◽  
pp. 2 ◽  
Author(s):  
Gerard Lemaitre ◽  
Pascal Vola ◽  
Eduard Muslimov
Keyword(s):  
Optical Design ◽  
Field Of View ◽  
Wide Field ◽  
Uniform Load ◽  
Freeform Surfaces ◽  
Aspheric Surfaces ◽  
Active Optics ◽  
Aspheric Mirror ◽  
Minimum Number ◽  
Drift Scan

Active optics techniques in astronomy provide high imaging quality. This paper is dedicated to highly deformable active optics that can generate non-axisymmetric aspheric surfaces—or freeform surfaces—by use of a minimum number of actuators. The aspheric mirror is obtained from a single uniform load that acts over the surface of a closed-form substrate whilst under axial reaction to its elliptical perimeter ring during spherical polishing. MESSIER space proposal is a wide-field low-central-obstruction folded-two-mirror-anastigmat or here called briefly three-mirror-anastigmat (TMA) telescope. The optical design is a folded reflective Schmidt. Basic telescope features are 36 cm aperture, f/2.5, with 1.6° × 2.6° field of view and a curved field detector allowing null distortion aberration for drift-scan observations. The freeform mirror is generated by spherical stress polishing that provides super-polished freeform surfaces after elastic relaxation. Preliminary analysis required use of the optics theory of 3rd-order aberrations and elasticity theory of thin elliptical plates. Final cross-optimizations were carried out with Zemax raytracing code and Nastran FEA elasticity code in order to determine the complete geometry of a glass ceramic Zerodur deformable substrate.

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Applying Generalizability Theory to Optimize Analysis of Spontaneous Teacher Talk in Elementary Classrooms

2020 ◽  
Vol 63 (6) ◽  
pp. 1947-1957
Author(s):  
Alexandra Hollo ◽  
Johanna L. Staubitz ◽  
Jason C. Chow
Keyword(s):  
Special Education Teachers ◽  
Generalizability Theory ◽  
Child Outcomes ◽  
Elementary Classrooms ◽  
Teacher Talk ◽  
Group Instruction ◽  
Data Set ◽  
School Year ◽  
Minimum Number ◽  
Representative Samples

Purpose Although sampling teachers' child-directed speech in school settings is needed to understand the influence of linguistic input on child outcomes, empirical guidance for measurement procedures needed to obtain representative samples is lacking. To optimize resources needed to transcribe, code, and analyze classroom samples, this exploratory study assessed the minimum number and duration of samples needed for a reliable analysis of conventional and researcher-developed measures of teacher talk in elementary classrooms. Method This study applied fully crossed, Person (teacher) × Session (samples obtained on 3 separate occasions) generalizability studies to analyze an extant data set of three 10-min language samples provided by 28 general and special education teachers recorded during large-group instruction across the school year. Subsequently, a series of decision studies estimated of the number and duration of sessions needed to obtain the criterion g coefficient ( g > .70). Results The most stable variables were total number of words and mazes, requiring only a single 10-min sample, two 6-min samples, or three 3-min samples to reach criterion. No measured variables related to content or complexity were adequately stable regardless of number and duration of samples. Conclusions Generalizability studies confirmed that a large proportion of variance was attributable to individuals rather than the sampling occasion when analyzing the amount and fluency of spontaneous teacher talk. In general, conventionally reported outcomes were more stable than researcher-developed codes, which suggests some categories of teacher talk are more context dependent than others and thus require more intensive data collection to measure reliably.

RGB Frequency Based Image Steganography

2020 ◽  
pp. 549-553
Author(s):  
Himanshu Kumar ◽  
Nitesh Kumar
Keyword(s):  
Image Steganography ◽  
Minimum Number

In this paper, we introduced a new RGB technique for image steganography. In this technique we introduced the idea of storing a different number of bits per channel (R, G or B) of a pixel based on the frequency of color values of pixel. The higher color frequency retains the maximum number of bits and lower color frequency stores the minimum number of bits.

On Number of Planes of Rearrangeably Nonblocking Optical Banyan Networks with Link Failures

2008 ◽  
Vol 1 (1) ◽  
pp. 43-54
Author(s):  
Basra Sultana ◽  
Mamun-ur-Rashid Khandker
Keyword(s):  
Optical Switching ◽  
Blocking Probability ◽  
Link Failure ◽  
Link Failures ◽  
Small Depth ◽  
Internal Link ◽  
Banyan Network ◽  
Minimum Number ◽  
Switch Design ◽  
Banyan Networks

Vertically stacked optical banyan (VSOB) networks are attractive for serving as optical switching systems due to the desirable properties (such as the small depth and self-routing capability) of banyan network structures. Although banyan-type networks result in severe blocking and crosstalk, both these problems can be minimized by using sufficient number of banyan planes in the VSOB network structure. The number of banyan planes is minimum for rearrangeably nonblocking and maximum for strictly nonblocking structure. Both results are available for VSOB networks when there exist no internal link-failures. Since the issue of link-failure is unavoidable, we intend to find the minimum number of planes required to make a VSOB network nonblocking when some links are broken or failed in the structure. This paper presents the approximate number of planes required to make a VSOB networks rearrangeably nonblocking allowing link-failures. We also show an interesting behavior of the  blocking  probability of a faulty VSOB networks that the blocking probability may not  always  increase monotonously with  the  increase  of  link-failures; blocking probability  decreases  for  certain range of  link-failures, and then increases again. We believe that such fluctuating behavior of blocking probability with the increase of link failure probability deserves special attention in switch design.  Keywords: Banyan networks; Blocking probability; Switching networks; Vertical stacking; Link-failures. © 2009 JSR Publications. ISSN: 2070-0237(Print); 2070-0245 (Online). All rights reserved. DOI: 10.3329/jsr.v1i1.1070

Mathematics of a Sudo-Kurve

2018 ◽  
Vol 5 (10) ◽  
pp. 5-28
Author(s):  
Tanya Khovanova ◽  
Wayne Zhao
Keyword(s):  
Minimum Number ◽  
Distinct Solution ◽  
Equivalent Variant

Abstract We investigate a type of a Sudoku variant called Sudo-Kurve, which allows bent rows and columns, and develop a new, yet equivalent, variant we call a Sudo-Cube. We examine the total number of distinct solution grids for this type with or without symmetry. We study other mathematical aspects of this puzzle along with the minimum number of clues needed and the number of ways to place individual symbols.

PREPARASI DEINOCOCCUS RADIODURANS DAN KHAMIR DALAM MATERIAL KECAP L-DRYING SEBAGAI BAHAN UJI PROFISIENSI

2016 ◽  
Vol 13 (1) ◽  
pp. 93
Author(s):  
Titin Yulinery ◽  
Ratih M.Dewi
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Deinococcus Radiodurans ◽  
Test Preparation ◽  
Quality Parameters ◽  
Soy Sauce ◽  
Yeast Saccharomyces Cerevisiae ◽  
Microbiological Test ◽  
Bacterial Contaminants ◽  
Minimum Number ◽  
Important Quality

Tes kemampuan adalah salah satu kegiatan penting dalam pengendalian mutu dan jaminan kualitas mikrobiologi laboratorium untuk mengukur kompetensi analis dan analisis uji profisiensi membutuhkan persiapan Model mikroorganisme adalah kualitas standar dan validitas. Mikrobiologi uji kualitas produk kedelai utama diarahkan pada kehadiran Saccharomyces cerevisiae ragi (S. cerevisiae), S. Bailli, S. rouxii dankontaminan bakteri seperti Bacillus dan Deinococcus. Jenis ragi dan bakteri yang terlibat dalam proses dan dapat menjadi salah satu parameter kualitas penting dalam persiapan yang dihasilkan. Jumlah dan viabilitas bakteri dan ragi menjadi parameter utama dalam proses persiapan bahan uji. Jumlah tersebut adalah jumlah minimum yang berlaku dapat dianalisis. Jumlah ini harus dibawah 10 CFU diperlukan untuk menunjukkan tingkat hygienitas proses dan tingkat minimal kontaminasi. Viabilitas bakteri dan bahan tes ragi persiapan untuk tes kemahiran kecap yang diawetkan dengan L-pengeringan adalah teknik Deinococcus radiodurans (D. radiodurans) 16 tahun, 58 tahun S. cerevisiae, dan S. roxii 13 tahun. kata kunci: Viabilitas, Deinococcus, khamir, L-pengeringan, Proficiency AbstractProficiency test is one of the important activities in quality control and quality assurance microbiology laboratory for measuring the competence of analysts and analysis Proficiency test requires a model microorganism preparations are standardized quality and validity. Microbiological test of the quality of the main soy products aimed at thepresence of yeast Saccharomyces cerevisiae (S. cerevisiae), S. bailli, S. rouxii and bacterial contaminants such as Bacillus and Deinococcus. Types of yeasts and bacteria involved in the process and can be one of the important quality parameters in the preparation produced. The number and viability of bacteria and yeasts become themain parameters in the process of test preparation materials. The amount in question is the minimum number that is valid can be analyzed. This amount must be below 10 CFU required to indicate the level of hygienitas process and the minimum level of contamination. Viability of bacteria and yeast test preparation materials for proficiencytest of soy sauce that preserved by L-drying technique is Deinococcus radiodurans ( D. radiodurans ) 16 years, 58 years S. cerevisiae, and S. roxii 13 years. key words : Viability, Deinococcus, Khamir, L-drying, Proficiency

Sign in / Sign up

Export Citation Format

Share Document