Three-dimensional base-isolation system using thick rubber bearings

2012 ◽  
Author(s):  
T. Wang ◽  
F. Wang
Keyword(s):  
Base Isolation ◽  
Three Dimensional ◽  
Isolation System ◽  
Base Isolation System ◽  
Rubber Bearings

Dynamic Nonlinear Analysis of an Hybrid Base Isolation System with Viscous Dampers and Friction Sliders in Parallel

2012 ◽  
Vol 234 ◽  
pp. 96-101 ◽  
Author(s):  
Donato Cancellara ◽  
Fabio de Angelis
Keyword(s):  
Nonlinear Analysis ◽  
Base Isolation ◽  
Three Dimensional ◽  
Time History ◽  
Seismic Action ◽  
Viscous Dampers ◽  
Isolation System ◽  
Fixed Base ◽  
Base Isolation System ◽  
Dynamic Nonlinear Analysis

In the present work we have analyzed a particular base isolation system for the seismic protection of a multi-storey reinforced concrete (RC) building. The viscous dampers and friction sliders are the devices adopted in parallel for realizing the base isolation system. The base isolation structure has been designed and verified according to European seismic code EC8 and by considering for the friction sliders the influence of the sliding velocity on the value of the friction coefficient. A dynamic nonlinear analysis for a three-dimensional base isolated structure has been performed. Recorded accelerograms for bi-directional ground motions have been used which comply with the requirements imposed by EC8 for the representation of a seismic action in a time history analysis. In this paper a comparative analysis is presented between the base isolated structure with the described hybrid base isolation system and the traditional fixed base structure.

scholarly journals STRUCTURAL DESIGN OF HIGH-RISE BUILDING WITH BASE ISOLATION SYSTEM USING ELASTIC SLIDING BEARINGS AND RUBBER BEARINGS

2001 ◽  
Vol 7 (12) ◽  
pp. 99-104 ◽  
Author(s):  
Ichizo KAWABATA ◽  
Masaharu TAKAYAMA ◽  
Yasuhiro NISHIKAWA ◽  
Yuichi KIMURA ◽  
Eiichi YAMAZAKI ◽  
...  
Keyword(s):  
Structural Design ◽  
Base Isolation ◽  
Sliding Bearings ◽  
Isolation System ◽  
High Rise ◽  
High Rise Building ◽  
Base Isolation System ◽  
Rubber Bearings

Seismic Analysis and Comparison of Different Base Isolation Systems for a Multi-Storey RC Building with Irregularities in Plan

2012 ◽  
Vol 594-597 ◽  
pp. 1788-1799 ◽  
Author(s):  
Donato Cancellara ◽  
Fabio de Angelis
Keyword(s):  
Base Isolation ◽  
Seismic Analysis ◽  
Cyclic Behavior ◽  
Isolation System ◽  
High Damping Rubber Bearings ◽  
Fixed Base ◽  
Base Isolation System ◽  
High Damping Rubber ◽  
Isolation Systems ◽  
Rubber Bearings

In the present paper the dynamic nonlinear analysis for a 3D base isolated structure is illustrated. A base isolated reinforced concrete building is designed and verified according to the European seismic codes such that the superstructure remains almost completely elastic and the nonlinear elements are localized only in the base isolation system. Nonlinear hysteretic models have been adopted to reproduce the cyclic behavior of the isolators. Two different base isolation systems are considered and their performances are compared for evaluating the behaviour of a base isolated building, highly irregular in plan, in presence of a seismic excitation defined with recorded accelerograms which characterize the bi-directional ground motions. The isolation system has been realized with a combination in parallel of elastomeric bearings and sliding devices. In the first analyzed isolation system we have used the High Damping Rubber Bearings (HDRB) and in the second analyzed isolation system we have used the Lead Rubber Bearings (LRB). Finally a comparative analysis between the base isolated structure with hybrid base isolation systems and the conventional fixed base structure is detailed.

Three Dimensional Seismic Isolation System for Next-Generation Nuclear Power Plant With Rolling Seal Type Air Spring and Hydraulic Rocking Suppression System

2005 ◽  
Author(s):  
Takahiro Shimada ◽  
Junji Suhara ◽  
Kazuhiko Inoue
Keyword(s):  
Dynamic Loading ◽  
Nuclear Power ◽  
Seismic Isolation ◽  
Base Isolation ◽  
Three Dimensional ◽  
Loading Test ◽  
Isolation System ◽  
Ability Test ◽  
Base Isolation System ◽  
Suppression System

Three dimensional (3D) seismic isolation devices have been developed to use for the base isolation system of the heavy building like a nuclear reactor building. The developed seismic isolation system is composed of rolling seal type air springs and the hydraulic type springs with rocking suppression system for vertical base isolation device. In horizontal direction, the same laminated rubber bearings are used as horizontal isolation device for these systems. The performances and the applicability have already been evaluated by the technical feasibility tests and performance tests for each system. In this study, it was evaluated that the performance of the 3D base isolation system with rolling seal type air springs combined with hydraulic rocking suppression devices. A 1/7 scaled model of the 3D base isolation devices were manufactured and some performance test were executed for each device. For the rolling seal type air springs, dynamic loading test was executed with a vibration table, and pressure resistant ability test was executed for reinforced air springs. In the dynamic loading test, it is confirmed that the natural period and damping performance were verified. In the pressure resistant ability test, it is confirmed that the air springs had sufficient strength. For the hydraulic rocking suppression system, forced dynamic loading test was carried out in order to measure the frictional and oil flow resistance force on each cylinder. And the vibration table tests were carried out with supported weight of 228 MN in order to evaluate and to confirm the horizontal and vertical isolation performance, rocking suppression performance, and the applicability of the this seismic isolation system as the combined system. 4 rolling seal type air springs and 4 hydraulic load-carrying cylinders with rocking suppression devices supported the weight. As a result, the proposed system was verified that it could be applied to the actual nuclear power plant building to be target.

Design of Shape Memory Alloy Damper for Base Isolated Structure

1997 ◽  
Author(s):  
Krzysztof Wilde ◽  
Paolo Gardoni ◽  
Yozo Fujino ◽  
Stefano Besseghini
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Base Isolation ◽  
Hysteretic Behavior ◽  
Isolation System ◽  
Rubber Bearing ◽  
Laminated Rubber Bearing ◽  
Base Isolation System ◽  
Rubber Bearings ◽  
Smart Base Isolation

Abstract Base isolation provides a very effective passive method of protecting the structure from the hazards of earthquakes. The proposed isolation system combines the laminated rubber bearing with the device made of shape memory alloy (SMA). The smart base isolation uses hysteretic behavior of SMA to increase the structural damping of the structure and utilizes the different responses of the SMA at different levels of strain to control the displacements of the base isolation system at various excitation levels. The performance of the smart base isolation is compared with the performance of isolation by laminated rubber bearings to assess the benefits of additional SMA damper for isolation of three story building.

Influence of the Strain Hardening of HDRBs in the Evaluation of the Seismic Response of a RC Base Isolated Structure

2012 ◽  
Vol 602-604 ◽  
pp. 1546-1554
Author(s):  
Donato Cancellara ◽  
Fabio de Angelis ◽  
Mario Pasquino
Keyword(s):  
Strain Hardening ◽  
Seismic Response ◽  
Base Isolation ◽  
Cyclic Behavior ◽  
Hysteretic Model ◽  
Isolation System ◽  
Limit Value ◽  
Hardening Effect ◽  
Base Isolation System ◽  
Rubber Bearings

In this paper we have analyzed the influence of the strain hardening behavior of High Damping Rubber Bearings (HDRBs) adopted for a base isolation system of a Reinforced Concrete (RC) isolated structure. For the modeling of the rubber isolators we have adopted an evolution of the Bouc-Wen’s hysteretic model taking into account the incremental hardening effect which appears when the shear strain of the HDRB exceeds the limit value around 100% usually adopted in design practice. The incremental hardening effect is sometimes neglected in the design but it is an important aspect because it ensures a seismic protection of the base isolated structure also in presence of exceptional seismic events for intensity or frequency content. In this paper we have highlighted the significant influence of this phenomenon in the seismic response of the isolated structure by reporting the cyclic behavior of a HDRB respectively neglecting and considering this aspect.

scholarly journals DEVELOPMENT OF BASE-ISOLATION SYSTEM CONSISTING OF SLIDING AND RUBBER BEARINGS

1996 ◽  
Vol 2 (2) ◽  
pp. 69-73 ◽  
Author(s):  
Seiji TOMISHIMA ◽  
Shoji KATSUTA ◽  
Masayoshi HISANO
Keyword(s):  
Base Isolation ◽  
Isolation System ◽  
Base Isolation System ◽  
Rubber Bearings
Sign in / Sign up

Export Citation Format

Share Document