Analysis of the shape-recovery performance of thermally-activated shape-memory polymer composite with microstructural heterogeneities

2012 ◽  
Author(s):  
Masaaki Nishikawa ◽  
Masaki Hojo
Keyword(s):  
Shape Memory ◽  
Polymer Composite ◽  
Shape Recovery ◽  
Shape Memory Polymer ◽  
Thermally Activated ◽  
Recovery Performance

Origami-inspired shape memory dual-matrix composite structures

2019 ◽  
Vol 30 (17) ◽  
pp. 2639-2647
Author(s):  
O-Hyun Kwon ◽  
Jin-Ho Roh
Keyword(s):  
Shape Memory ◽  
Polymer Composite ◽  
Matrix Composite ◽  
Composite Structures ◽  
Shape Recovery ◽  
Shape Memory Polymer ◽  
Tensile Tests ◽  
Woven Fabrics ◽  
Morphing Structure ◽  
Composite Skins

A sandwiched morphing structure is developed using an Origami-inspired shape memory dual-matrix composite core and shape memory polymer composite skins. The geometric parameters of the morphing structure are designed to have a zero Poisson’s ratio. In addition, an analytical model is developed to analyze the three-dimensional morphing structure easily. The shape memory dual-matrix composites are fabricated with woven fabrics based on the shape memory polymers, and an epoxy matrix is used to ensure a flexible and shape-recoverable structure. The shape recoverability of the shape memory polymer composite skins is verified by measuring the shape recovery ratio at various temperatures. Based on the tensile tests for the shape memory polymer composite skins and shape memory polymer hinges, it is found that the morphing structure can be highly flexible depending on temperature. Finally, the bending and shape recovery behaviors of the morphing structure are demonstrated.

Ductile Shape-Memory Polymer Composite with Enhanced Shape Recovery Ability

2020 ◽  
Vol 12 (52) ◽  
pp. 58295-58300
Author(s):  
Kaiyuan Peng ◽  
Yao Zhao ◽  
Shima Shahab ◽  
Reza Mirzaeifar
Keyword(s):  
Shape Memory ◽  
Polymer Composite ◽  
Shape Recovery ◽  
Shape Memory Polymer

Study on a Thermoresponsive Shape Memory Polymer Used in Down-Hole Packer

2016 ◽  
Vol 847 ◽  
pp. 456-459
Author(s):  
Tao Fu ◽  
Bai Ru Shi ◽  
Zheng Tong ◽  
Ze Jun Shen ◽  
Song Bo Wei ◽  
...  
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Environmental Changes ◽  
Shape Memory Polymer ◽  
Degree Of Deformation ◽  
Influence Of Temperature ◽  
Recovery Performance ◽  
Original Configuration

Shape memory polymer (SMP) is being studied and anticipated to be used in a novel down-hole packer. SMP is capable of recovering a predetermined shape following environmental changes, allowing the packer to be altered to a smaller size during run in and to retain its original configuration after activated by the heat in the wellbore. This paper describes the work involved in studying the shape recovery performance of a polyethylene based thermoresponsive SMP under different conditions. The influence of temperature, pressure and degree of deformation on the SMP’s shape recovery performance has been characterized.

Experimental study of the functional and mechanical properties of shape memory polymer composites for a reflector of the space antenna

2020 ◽  
Vol 86 (1) ◽  
pp. 51-56
Author(s):  
Egor V. Moskvichev ◽  
Alexey Yu. Larichkin
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Shape Memory ◽  
Polymer Composite ◽  
Shape Recovery ◽  
Shape Memory Polymer ◽  
Experimental Tests ◽  
Polymer Composite Material ◽  
Operating Conditions ◽  
Space Antenna

Experimental study of the shape memory polymer composite is carried out as a part of scientific and technological work aimed at development of the new promising reflectors for space antenna. The studied material consists of three-layered carbon biaxial fabric St 12073 impregnated with a polyurethane-based Diaplex MP5510 polymer matrix. This material is intended for manufacturing a frame used in the construction of a precise composite reflector of space antenna. When opening the reflector to the transport position, the rim activated by heating recovers a previously specified shape thus increasing the rigidity of the reflector at the periphery and enhancing the accuracy of the reflecting surface. To study the functional and mechanical properties of the rim material in manufacturing and operating conditions, experimental tests were carried out on the samples with different schemes of reinforcement: [03], [0/±60] and [0/±45]. The main goal of the study is to determine the degree and rate of the shape recovery, reinforcement angles, deformation rate and exposure time in the strained state. The developed test program included several stages. At the first stages, tests were carried out for fixing and restoring the shape upon three-point bending of flat samples at a strain rate of 1, 5, and 10 mm/sec and exposure of the specimens in deformed state for 24, 48, and 96 h. According to the results the material with the reinforcement angles [03] was accepted as optimal for the rim design, as it has maximal shape recovery parameters. For the selected material at the final stage of the study, the elastic modulus and tensile strength were determined at operating temperatures –50, +20, and +60°C. The tests showed that the studied polymer composite material has the desired shape memory properties and is promising for the rim manufacturing provided the heat insulation during operation.

Sign in / Sign up

Export Citation Format

Share Document