Research on the distribution of electric field intensity and laser damage characteristics of thin films

2010 ◽  
Author(s):  
Yuan Li ◽  
Jun-qi Xu ◽  
Jun-hong Su
Keyword(s):  
Thin Films ◽  
Electric Field ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Laser Damage ◽  
Damage Characteristics ◽  
Distribution Of Electric Field

scholarly journals Analysis of the influence of the complex structure of clay hollow bricks on the values of electric field intensity by using the FDTD method

2016 ◽  
Vol 65 (4) ◽  
pp. 745-759 ◽  
Author(s):  
Agnieszka Choroszucho
Keyword(s):  
Electric Field ◽  
Field Intensity ◽  
Electromagnetic Waves ◽  
Electric Field Intensity ◽  
Complex Structure ◽  
Fdtd Method ◽  
5 Ghz ◽  
Wave Phenomena ◽  
Hollow Bricks ◽  
Distribution Of Electric Field

Abstract The study presents the analysis of the effects occurring at the propagation of electromagnetic waves within an area containing non-ideal, non-homogenous and absorbing dielectric. The analysed models are connected with housing constructions and include single and double-layered walls made of clay hollow bricks. The influence of the size of holes, the contained clay mass percentage and conductivity of brick on the distribution of electric field is presented. Double-layered wall causes more heterogeneity in distribution of electric field and numerous maxima and minima to compare with singlelayered construction. The presented results refer to the electromagnetic field generated by a wireless communication system (Wi-Fi), operating within the standard frequencies (2.4 GHz and 5 GHz). A FDTD method was used to the analysis of electric field distribution. Also in this paper all formulations of difference method (FDTD) is presented. The possibilities of modifying the described method are indicated too. The obtained values of electric field intensity allow to determining the attenuation coefficient for different variants of the walls. Detailed analysis of influence of different types of building construction will make it possible to better understand the wave phenomena and counteract local fading at planning of wireless networks systems.

Effect of Electrical Trees on the Distribution of Electric Field and Space Charge in Cross-linked Polyethylene Cables

2020 ◽  
Vol 13 ◽  
Author(s):  
Yasha Li ◽  
Huiyao Wang ◽  
Kai Chen ◽  
Jiamao Chen
Keyword(s):  
Electric Field ◽  
Space Charge ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Three Dimensional ◽  
Trunk Length ◽  
Xlpe Cable ◽  
Insulation Aging ◽  
Electrical Trees ◽  
Distribution Of Electric Field

Background: Electrical trees can affect the distribution of electric field and space charge in cross-linked polyethylene (XLPE) cables, and play an important role in insulation aging and breakdown of cables. Therefore, it is important to study the influence of electrical trees in cables. Methods: In this study, the finite element method of second-order tetrahedral element and electromagnetic theory method are used for calculation. A model of XLPE cable with three-dimensional electrical trees is taken as an example for calculation. Results: The results shows that the longer the trunk length is, the greater the electric field intensity at the end of the branch is; the farther the electrical trees are from the insulation side of the high voltage, the more the electric field intensity of each location decreases. Conclusion: With the increase of the resistivity of the trees, the electric field intensity and charge density tend to be stable at the end of the tree.

Manipulating the distribution of electric field intensity to effectively enhance the spatial and spectral fluorescence intensity of fluorescent nanodiamonds

Nanoscale ◽  
2018 ◽  
Vol 10 (37) ◽  
pp. 17576-17584 ◽  
Author(s):  
Shan-Jen Kuo ◽  
Pei-Chang Tsai ◽  
Yang-Chun Lee ◽  
Sih-Wei Chang ◽  
Shingo Sotoma ◽  
...  
Keyword(s):  
Electric Field ◽  
Field Intensity ◽  
Fluorescence Intensity ◽  
Electric Field Intensity ◽  
Fluorescent Nanodiamonds ◽  
Spectral Distributions ◽  
Distribution Of Electric Field

We can manipulate the spatial and spectral distributions of electric field intensity to enhance the fluorescence intensity of fluorescent nanodiamonds.

High-speed isotachophoresis. Analytical aspects of the steady-state longitudinal temperature profiles

1979 ◽  
Vol 44 (3) ◽  
pp. 841-853 ◽  
Author(s):  
Zbyněk Ryšlavý ◽  
Petr Boček ◽  
Miroslav Deml ◽  
Jaroslav Janák
Keyword(s):  
Steady State ◽  
Temperature Distribution ◽  
Electric Field ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Minor Component ◽  
Physical Models ◽  
Temperature Profiles ◽  
Longitudinal Temperature ◽  
Continuous Character

The problem of the longitudinal temperature distribution was solved and the bearing of the temperature profiles on the qualitative characteristics of the zones and on the interpretation of the record of the separation obtained from a universal detector was considered. Two approximative physical models were applied to the solution: in the first model, the temperature dependences of the mobilities are taken into account, the continuous character of the electric field intensity at the boundary being neglected; in the other model, the continuous character of the electric field intensity is allowed for. From a comparison of the two models it follows that in practice, the variations of the mobilities with the temperature are the principal factor affecting the shape of the temperature profiles, the assumption of a discontinuous jump of the electric field intensity at the boundary being a good approximation to the reality. It was deduced theoretically and verified experimentally that the longitudinal profiles can appreciably affect the longitudinal variation of the effective mobilities in the zone, with an infavourable influence upon the qualitative interpretation of the record. Pronounced effects can appear during the analyses of the minor components, where in the corresponding short zone a temperature distribution occurs due to the influence of the temperatures of the neighbouring zones such that the temperature in the zone of interest in fact does not attain a constant value in axial direction. The minor component does not possess the steady-state mobility throughout the zone, which makes the identification of the zone rather difficult.

POLARON IN A QUANTUM DOT UNDER AN ELECTRIC FIELD

2007 ◽  
Vol 21 (24) ◽  
pp. 1635-1642
Author(s):  
MIAN LIU ◽  
WENDONG MA ◽  
ZIJUN LI
Keyword(s):  
Quantum Dot ◽  
Electric Field ◽  
Field Intensity ◽  
Ground State Energy ◽  
Ground State ◽  
Electric Field Intensity ◽  
State Energy ◽  
Theoretical Study ◽  
The Moment ◽  
Transformation Methods

We conducted a theoretical study on the properties of a polaron with electron-LO phonon strong-coupling in a cylindrical quantum dot under an electric field using linear combination operator and unitary transformation methods. The changing relations between the ground state energy of the polaron in the quantum dot and the electric field intensity, restricted intensity, and cylindrical height were derived. The numerical results show that the polar of the quantum dot is enlarged with increasing restricted intensity and decreasing cylindrical height, and with cylindrical height at 0 ~ 5 nm , the polar of the quantum dot is strongest. The ground state energy decreases with increasing electric field intensity, and at the moment of just adding electric field, quantum polarization is strongest.

scholarly journals Effects of Flash Sintering Parameters on Performance of Ceramic Insulator

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1157
Author(s):  
Yong Liu ◽  
Xingwang Huang
Keyword(s):  
Grain Size ◽  
Electric Field ◽  
Field Intensity ◽  
Current Density ◽  
Electric Field Intensity ◽  
Unit Cell ◽  
Uniform Structure ◽  
Ceramic Insulator ◽  
Flash Sintering ◽  
Ceramic Insulators

Ceramic outdoor insulators play an important role in electrical insulation and mechanical support because of good chemical and thermal stability, which have been widely used in power systems. However, the brittleness and surface discharge of ceramic material greatly limit the application of ceramic insulators. From the perspective of sintering technology, flash sintering technology is used to improve the performance of ceramic insulators. In this paper, the simulation model of producing the ceramic insulator by the flash sintering technology was set up. Material Studio was used to study the influence of electric field intensity and temperature on the alumina unit cell. COMSOL was used to study the influence of electric field intensity and current density on sintering speed, density and grain size. Obtained results showed that under high temperature and high voltage, the volume of the unit cell becomes smaller and the atoms are arranged more closely. The increase of current density can result in higher ceramic density and larger grain size. With the electric field intensity increasing, incubation time shows a decreasing tendency and energy consumption is reduced. Ceramic insulators with a higher uniform structure and a smaller grain size can show better dielectric performance and higher flashover voltage.

scholarly journals Frequency-Tunable Terahertz Plasmonic Structure Based on the Solid Immersed Method for Sensing

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1419
Author(s):  
Toshio Sugaya ◽  
Yukio Kawano
Keyword(s):  
Electric Field ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Wavelength Region ◽  
Diffraction Limit ◽  
Field Analysis ◽  
Plasmonic Structure ◽  
Sensing Applications ◽  
Frequency Tunable ◽  
Bull's Eye

Terahertz waves are located in the frequency band between radio waves and light, and they are being considered for various applications as a light source. Generally, the use of light requires focusing; however, when a terahertz wave is irradiated onto a small detector or a small measurement sample, its wavelength, which is much longer than that of visible light, causes problems. The diffraction limit may make it impossible to focus the terahertz light down to the desired range by using common lenses. The Bull’s Eye structure, which is a plasmonic structure, is a promising tool for focusing the terahertz light beyond the diffraction limit and into the sub-wavelength region. By utilizing the surface plasmon propagation, the electric field intensity and transmission coefficient can be enhanced. In this study, we improved the electric field intensity and light focusing in a small region by adapting the solid immersion method (SIM) from our previous study, which had a frequency-tunable nonconcentric Bull’s Eye structure. Through electromagnetic field analysis, the electric field intensity was confirmed to be approximately 20 times higher than that of the case without the SIM, and the transmission measurements confirmed that the transmission through an aperture had a gap of 1/20 that of the wavelength. This fabricated device can be used in imaging and sensing applications because of the close contact between the transmission aperture and the measurement sample.

Sign in / Sign up

Export Citation Format

Share Document