Phase transformation and creep behavior in Ti 50 Pd 30 Ni 20 high temperature shape memory alloy in compression

2010 ◽  
Author(s):  
Parikshith K. Kumar ◽  
Uri Desai ◽  
James Monroe ◽  
Dimitris C. Lagoudas ◽  
Ibrahim Karaman ◽  
...  
2006 ◽  
Vol 503-504 ◽  
pp. 1013-0 ◽  
Author(s):  
Chao Ying Xie ◽  
Z.G. Fan ◽  
Z.H. Li ◽  
G.Q. Xiang ◽  
X.H. Cheng

Microstructures and transformation behavior of TiNi shape memory alloy after high temperature ECAE process have been investigated. It is found that the initial coarse grains were refined after high temperature ECAE processes and short annealing at 750°C. Transformation temperatures of TiNi alloy sharply decreased after two ECAE processes, rose obviously when annealed at 750°C for 5min, and quickly rose back after annealing at 500°C for 2 hours. Reasons for phase transformation behavior changes have been discussed.


2013 ◽  
Vol 738-739 ◽  
pp. 82-86 ◽  
Author(s):  
Thomas Niendorf ◽  
Jayaram Dadda ◽  
Jan Lackmann ◽  
James A. Monroe ◽  
Ibrahim Karaman ◽  
...  

This paper reports on the tension-compression asymmetry of [001]-oriented Co49Ni21Ga30 single crystals at elevated temperatures. Maximum strains of -4.8 % and 8.6 % in compression and tension, respectively, were found. A linear Clausius-Clapeyron relationship was observed for both stress-states where the smaller slope in tension resulted in a significant increase of the phase transformation temperatures with stress, which reached 180 °C under a constant stress level of 150 MPa. In addition, the material demonstrated a large pseudoelastic temperature range of about 300 °C under both stress state conditions. The results in this study unequivocally indicate the potential of these alloys for applications where elevated temperatures and stress levels prevail.


2016 ◽  
Vol 663 ◽  
pp. 64-68 ◽  
Author(s):  
E.M. Mazzer ◽  
C.S. Kiminami ◽  
C. Bolfarini ◽  
R.D. Cava ◽  
W.J. Botta ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document