Impact of photon counting detector spectral response on dual energy techniques

Author(s):  
Adam S. Wang ◽  
Norbert J. Pelc
2020 ◽  
Vol 30 (11) ◽  
pp. 5904-5912 ◽  
Author(s):  
Fredrik Grönberg ◽  
Johan Lundberg ◽  
Martin Sjölin ◽  
Mats Persson ◽  
Robert Bujila ◽  
...  

Abstract Rationale and objectives The purpose of this study was to evaluate the feasibility of unconstrained three-material decomposition in a human tissue specimen containing iodinated contrast agent, using an experimental multi-bin photon-counting silicon detector. It was further to evaluate potential added clinical value compared to a 1st-generation state-of-the-art dual-energy computed tomography system. Materials and methods A prototype photon-counting silicon detector in a bench-top setup for x-ray tomographic imaging was calibrated using a multi-material calibration phantom. A heart with calcified plaque was obtained from a deceased patient, and the coronary arteries were injected with an iodinated contrast agent mixed with gelatin. The heart was imaged in the experimental setup and on a 1st-generation state-of-the-art dual-energy computed tomography system. Projection-based three-material decomposition without any constraints was performed with the photon-counting detector data, and the resulting images were compared with those obtained from the dual-energy system. Results The photon-counting detector images show better separation of iodine and calcium compared to the dual-energy images. Additional experiments confirmed that unbiased estimates of soft tissue, calcium, and iodine could be achieved without any constraints. Conclusion The proposed experimental system could provide added clinical value compared to current dual-energy systems for imaging tasks where mix-up of iodine and calcium is an issue, and the anatomy is sufficiently small to allow iodine to be differentiated from calcium. Considering its previously shown count rate capability, these results show promise for future integration of this detector in a clinical CT scanner. Key Points • Spectral photon-counting detectors can solve some of the fundamental problems with conventional single-energy CT. • Dual-energy methods can be used to differentiate iodine and calcium, but to do so must rely on constraints, since solving for three unknowns with only two measurements is not possible. Photon-counting detectors can improve upon these methods by allowing unconstrained three-material decomposition. • A prototype photon-counting silicon detector with high count rate capability allows performing unconstrained three-material decomposition and qualitatively shows better differentiation of iodine and calcium than dual-energy CT.


PLoS ONE ◽  
2019 ◽  
Vol 14 (7) ◽  
pp. e0219659 ◽  
Author(s):  
Thorsten Sellerer ◽  
Sebastian Ehn ◽  
Korbinian Mechlem ◽  
Manuela Duda ◽  
Michael Epple ◽  
...  

2009 ◽  
Author(s):  
Erik Fredenberg ◽  
Mats Lundqvist ◽  
Magnus Åslund ◽  
Magnus Hemmendorff ◽  
Björn Cederström ◽  
...  

2022 ◽  
Vol 17 (01) ◽  
pp. C01028
Author(s):  
J. Dudak ◽  
J. Zemlicka

Abstract X-ray micro-CT has become a popular and widely used tool for the purposes of scientific research. Although the current state-of-the-art micro-CT is on a high technology level, it still has some known limitations. One of the relevant issues is an inability to clearly identify and quantify specific materials. The mentioned drawback can be solved by the energy-sensitive CT approach. Dual-energy CT, which is already frequently used in human medicine, offers the identification of two different materials; for example, it differentiates an intravenous contrast agent from bone or it can indicate the composition of urinary stones. Resolving a larger number of material components within a single object is beyond the capabilities of dual-energy CT. Such an approach requires a higher number of measurements using different photon energies. A possible solution for multi bin, or so-called spectral CT, is the application of photon-counting detectors. Photon counting technology offers an integrated circuitry capable of resolving the energy of incoming photons in each pixel. Therefore, it is possible to collect data in user-defined energy windows. This contribution evaluates the applicability of the large-area photon-counting detector Timepix for multi bin energy-sensitive micro-CT. It presents an experimental phantom study focused on the simultaneous K-edge-based identification and quantification of multiple contrast agents within a single object. The paper describes the collection of multiple energy bins using the Timepix detector operated in the photon counting mode, explains the data processing, and demonstrates the results obtained from an in-house implemented basis material decomposition algorithm.


2017 ◽  
Vol 44 (11) ◽  
pp. 5938-5948 ◽  
Author(s):  
Moiz Ahmad ◽  
Rebecca Fahrig ◽  
Leland Pung ◽  
Martin Spahn ◽  
Niko S. Köster ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document