Flat supercontinuum generation pumped by femtosecond pulses in zero-dispersion wavelength of photonic crystal fiber

2009 ◽  
Author(s):  
Yuan Guo ◽  
Shuangchen Ruan ◽  
Yongqin Yu ◽  
Chenlin Du ◽  
Peiguang Yan
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Supercontinuum Generation ◽  
Femtosecond Pulses ◽  
Crystal Fiber ◽  
Dispersion Wavelength ◽  
Zero Dispersion Wavelength

scholarly journals Experimental study on supercontinuum generation in zero-dispersion wavelength decreasing photonic crystal fiber

2013 ◽  
Vol 62 (9) ◽  
pp. 094217
Author(s):  
Zhu Xian ◽  
Zhang Xin-Ben ◽  
Xiang Chen ◽  
Peng Jing-Gang ◽  
Dai Neng-Li ◽  
...  
Keyword(s):  
Experimental Study ◽  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Supercontinuum Generation ◽  
Crystal Fiber ◽  
Dispersion Wavelength ◽  
Zero Dispersion Wavelength

Designing a photonic crystal fiber for an ultra-broadband parametric amplification in telecommunication region

2016 ◽  
Vol 25 (02) ◽  
pp. 1650023 ◽  
Author(s):  
Hassan Pakarzadeh ◽  
Mostafa Taghizadeh ◽  
Mohsen Hatami
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Wavelength Division Multiplexing ◽  
Wavelength Division ◽  
Crystal Fiber ◽  
Dispersion Wavelength ◽  
Zero Dispersion Wavelength ◽  
Highly Nonlinear ◽  
Fiber Optical ◽  
Fiber Optical Parametric Amplifier

A photonic crystal fiber (PCF) with a zero-dispersion wavelength (ZDW) in the telecommunication region is designed and an ultra-broadband fiber optical parametric amplifier (FOPA) based on such PCF is simulated. Results show that the PCF-based FOPA exhibits much higher gain with a very broad bandwidth (covering O- to U-band) in comparison with the highly nonlinear fiber (HNLF)-based FOPA. Also, the required fiber length and the input pump power are reduced for the PCF-based FOPA. The obtained results show the great potential of the PCF-based OPA for the telecommunication applications, e.g. amplification of wavelength-division multiplexing (WDM) signals.

Influence of Temperature on the Chromatic Dispersion of Photonic Crystal Fiber by Infiltrating the Air Holes with Water

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Mohammed Debbal ◽  
Mouweffeq Bouregaa ◽  
Hicham Chikh-Bled ◽  
Mohammed El Kebir Chikh-Bled ◽  
Mohammed Chamse Eddine Ouadah
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Chromatic Dispersion ◽  
Beam Propagation Method ◽  
Finite Domain ◽  
Influence Of Temperature ◽  
Crystal Fiber ◽  
Dispersion Wavelength ◽  
Zero Dispersion Wavelength ◽  
Influence Of Temperature On

AbstractThis paper describes study of photonic crystal fiber (PCF) in order to study the influence of temperature on the chromatic dispersion; these types of fibers are based on commercial structures, but air holes will be infiltrated with water. Using finite domain-beam propagation method, it is shown that the zero dispersion wavelength can be shifted from 1.058753 to 1.271767 µm, a shift of 213 nm. At 50 °C, a shift of 169 nm.As a result, we reveal that the proposed PCF can successfully compensate for the chromatic dispersion by the influence of temperature. Furthermore, the design model and methodology can be applied to design other dispersion-based devices, such as dispersion-flattened fibers and dispersion-shifted fibers, or can be used also as a sensor of temperature.

scholarly journals Numerical Investigation of Mid-Infrared Supercontinuum Generation in GeAsSe Based Chalcogenide Photonic Crystal Fiber Using Low Peak Power

2016 ◽  
Vol 8 (4) ◽  
pp. 29 ◽  
Author(s):  
M. R. Karim ◽  
B. M. A. Rahman
Keyword(s):  
Photonic Crystal ◽  
Numerical Simulations ◽  
Photonic Crystal Fiber ◽  
Peak Power ◽  
Infrared Region ◽  
Mid Infrared ◽  
Dispersion Engineering ◽  
Crystal Fiber ◽  
Dispersion Wavelength ◽  
Zero Dispersion Wavelength

We numerically investigate the use of photonic crystal fiber (PCF) through dispersion engineering of its cladding containing air-holes for supercontinuum (SC) generation in the mid-infrared region using low peak power. A 3.6-cm-long PCF made using Ge11.5As24Se64.5 chalcogenide (ChG) glass with a hexagonal array of air-holes was optimized for obtaining zero-dispersion wavelength through dispersion tailoring around the pump wavelength of 4 μm. We have performed numerical simulations for such dispersion tailored ChG PCF with the peak power range between 0.25 kW and 2 kW. It was found through rigorous numerical simulations that an ultrabroadband mid-infrared SC spectra covering the wavelength range 2-8 μm which is equivalent to 2 octaves could be generated using pump pulses of 320 fs duration at a wavelength of 4 μm with a relatively low peak power of 2 kW by using our proposed ChG PCF design.

Effect of ethanol infiltration on the zero dispersion wavelength of solid core photonic crystal fiber

Optik ◽  
2017 ◽  
Vol 147 ◽  
pp. 197-203 ◽  
Author(s):  
Rahul Kumar Gangwar ◽  
Akhilesh Kumar Pathak ◽  
Payal Priyadarshani ◽  
Vinod Kumar Singh
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Solid Core ◽  
Crystal Fiber ◽  
Dispersion Wavelength ◽  
Zero Dispersion Wavelength

Investigation of supercontinuum generation in photonic crystal fiber using bursts of femtosecond pulses

2021 ◽  
pp. 127132
Author(s):  
Julius Vengelis ◽  
Miglė Kuliešaitė ◽  
Vytautas Jukna ◽  
Vygandas Jarutis ◽  
Valdas Sirutkaitis
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Supercontinuum Generation ◽  
Femtosecond Pulses ◽  
Crystal Fiber
Sign in / Sign up

Export Citation Format

Share Document