Grey levels in CCD images and the intensity of light sources needed for high-speed imaging

2008 ◽  
Author(s):  
R. Germer
Keyword(s):  
High Speed ◽  
Light Sources ◽  
High Speed Imaging

scholarly journals What is the optimal light source for optical mapping using voltage- and calcium-sensitive dyes?

2020 ◽  
pp. 599-607
Author(s):  
V Olejnickova ◽  
D Sedmera
Keyword(s):  
Light Source ◽  
Optical System ◽  
High Speed ◽  
Optical Mapping ◽  
The Other ◽  
Mouse Heart ◽  
Xenon Lamp ◽  
Light Sources ◽  
High Speed Imaging ◽  
Advantages And Disadvantages

Optical mapping is a fluorescence-based physiological method to image spreading of action potential in excitable tissues, such as the heart and central nervous system. Because of the requirements for high speed imaging in low light conditions, highly sensitive high-speed cameras together with an optical system with maximum photon efficiency are required. While the optimization of these two components is relatively straightforward, the choice of the perfect light source is less simple; depending on the other (usually fixed) components, various parameters may acquire different weight in decision-making process. Here we describe the rationale for building an optical mapping setup and consider the relative advantages and disadvantages of three different commonly available light sources: mercury vapor lamp (HBO), xenon lamp (XBO), and light emitting diode (LED). Using the same optical system (fluorescence macroscope) and high-speed camera (Ultima L), we have tested each of the sources for its ability to provide bright and even illumination of the field of view and measured its temporal fluctuations in intensity. Then we used each in the actual optical mapping experiment using isolated, perfused adult mouse heart or chick embryonic heart to determine the actual signal to noise ratio at various acquisition rates. While the LED sources have undergone significant improvements in the recent past, the other alternatives may still surpass them in some parameters, so they may not be the automatic number one choice for every application.

Experimental Measurement of In-Plane Rolling Nonpneumatic Tire Vibrations Using High-Speed Imaging

2019 ◽  
Vol 47 (3) ◽  
pp. 196-210
Author(s):  
Meghashyam Panyam ◽  
Beshah Ayalew ◽  
Timothy Rhyne ◽  
Steve Cron ◽  
John Adcox
Keyword(s):  
High Speed ◽  
Image Correlation ◽  
Dynamic Mode Decomposition ◽  
Dynamic Mode ◽  
High Speed Imaging ◽  
Correlation Algorithm ◽  
Mode Decomposition ◽  
Series Of Experiments ◽  
Plane Deformations ◽  
Dominant Frequencies

ABSTRACT This article presents a novel experimental technique for measuring in-plane deformations and vibration modes of a rotating nonpneumatic tire subjected to obstacle impacts. The tire was mounted on a modified quarter-car test rig, which was built around one of the drums of a 500-horse power chassis dynamometer at Clemson University's International Center for Automotive Research. A series of experiments were conducted using a high-speed camera to capture the event of the rotating tire coming into contact with a cleat attached to the surface of the drum. The resulting video was processed using a two-dimensional digital image correlation algorithm to obtain in-plane radial and tangential deformation fields of the tire. The dynamic mode decomposition algorithm was implemented on the deformation fields to extract the dominant frequencies that were excited in the tire upon contact with the cleat. It was observed that the deformations and the modal frequencies estimated using this method were within a reasonable range of expected values. In general, the results indicate that the method used in this study can be a useful tool in measuring in-plane deformations of rolling tires without the need for additional sensors and wiring.

High-Speed Imaging to Study an Auto-Oscillating Vocal Fold Replica for Different Initial Conditions

2017 ◽  
Vol 09 (05) ◽  
pp. 1750064 ◽  
Author(s):  
A. Van Hirtum ◽  
X. Pelorson
Keyword(s):  
Vocal Fold ◽  
High Speed ◽  
Initial Conditions ◽  
Vocal Folds ◽  
High Speed Imaging ◽  
Human Voice ◽  
Manual Intervention ◽  
Geometrical Features ◽  
Upstream Pressure

Experiments on mechanical deformable vocal folds replicas are important in physical studies of human voice production to understand the underlying fluid–structure interaction. At current date, most experiments are performed for constant initial conditions with respect to structural as well as geometrical features. Varying those conditions requires manual intervention, which might affect reproducibility and hence the quality of experimental results. In this work, a setup is described which allows setting elastic and geometrical initial conditions in an automated way for a deformable vocal fold replica. High-speed imaging is integrated in the setup in order to decorrelate elastic and geometrical features. This way, reproducible, accurate and systematic measurements can be performed for prescribed initial conditions of glottal area, mean upstream pressure and vocal fold elasticity. Moreover, quantification of geometrical features during auto-oscillation is shown to contribute to the experimental characterization and understanding.

scholarly journals Air mediates the impact of a compliant hemisphere on a rigid smooth surface

Soft Matter ◽  
2021 ◽  
Author(s):  
Siqi Zheng ◽  
Sam Dillavou ◽  
John M. Kolinski
Keyword(s):  
Elastic Body ◽  
Elastic Properties ◽  
Impact Velocity ◽  
Solid Surface ◽  
High Speed ◽  
Smooth Surface ◽  
High Speed Imaging ◽  
The Impact ◽  
Rigid Smooth

When a soft elastic body impacts upon a smooth solid surface, the intervening air fails to drain, deforming the impactor. High-speed imaging with the VFT reveal rich dynamics and sensitivity to the impactor's elastic properties and the impact velocity.

Sign in / Sign up

Export Citation Format

Share Document