Direct Measurements Of Phase Matching Properties In Small Single Crystals Of New Nonlinear Materials

1989 ◽  
Vol 28 (1) ◽  
Author(s):  
Stephan P. Velsko
Nature ◽  
2004 ◽  
Vol 432 (7015) ◽  
pp. 374-376 ◽  
Author(s):  
M. Baudrier-Raybaut ◽  
R. Haïdar ◽  
Ph. Kupecek ◽  
Ph. Lemasson ◽  
E. Rosencher

2004 ◽  
Vol 26 (3) ◽  
pp. 217-222 ◽  
Author(s):  
V Petrov ◽  
V Badikov ◽  
G Shevyrdyaeva ◽  
V Panyutin ◽  
V Chizhikov

1991 ◽  
Vol 30 (Part 1, No. 9A) ◽  
pp. 2002-2007 ◽  
Author(s):  
Masaji Shimazu ◽  
Masayuki Tsukioka ◽  
Shinichiro Kuroiwa ◽  
Yasuo Tanokura ◽  
Sadao Tsutsumi

2011 ◽  
Vol 675-677 ◽  
pp. 995-998
Author(s):  
Zhen Wang ◽  
Ning Hui Wang ◽  
Tie Li

High quality magnesium oxide (MgO) single crystals have been grown by an arc-fusion method. Due to the hostile environment for observing the process occurring in the inner zone of the furnace, direct measurements on the arcs by conventional diagnostic method are practically impossible. Moreover, it has been proved that the control of the temperature field of the whole system is crucial to grow high-purityMgO single crystals with large and super-large sizes. However, very few studies have been carried out to investigate the correlation between the thermal behavior and MgO single crystal growth in the furnace. In present study, a transient 3D finite element model has been developed to depict melt/crystal interface and to find out the determining factors that affect the crystal growth rate and the growth direction. It is shown that the model gave a good description of the bath shape which agrees well with that of the solidified MgO in experiments. By the transient analysis, the trend and time delay of the temperature variation on the shell were also predicted.


2010 ◽  
Vol 168-169 ◽  
pp. 134-137 ◽  
Author(s):  
Y.S. Koshkid’ko ◽  
Konstantin Skokov ◽  
Yury G. Pastushenkov ◽  
S.A. Nikitin ◽  
T.I. Ivanova

Direct measurements of the magnetocaloric effect (MCE) in RCo5 single crystals in the region of spin-reorientation transitions (SRT) were carried out. It was shown that the values of MCE in the region of SRTs are comparable to the values of MCE in the vicinity of the Curie temperature. The anisotropy constants of the compounds were measured by the torque method. The anisotropic MCE calculation on the basis of anisotropy constants showed a good accordance with the experimental data.


2012 ◽  
Vol 35 (2) ◽  
pp. 307-309 ◽  
Author(s):  
G. Peramaiyan ◽  
P. Pandi ◽  
V. Jayaramakrishnan ◽  
Subhasis Das ◽  
R. Mohan Kumar

2004 ◽  
Vol 467-470 ◽  
pp. 189-192 ◽  
Author(s):  
Søren Schmidt ◽  
X. Huang ◽  
Dorte Juul Jensen

With the 3DXRD microscope it is now possible to follow in-situ the 3D shape of a recrystallizing grain in the bulk of a deformed microstructure. This opens up the possibility of making direct measurements of boundary migration through a deformed matrix. This paper focuses on recrystalliztion in a deformed Aluminum single crystal with initial orientation (112)<111> (Cu).


Sign in / Sign up

Export Citation Format

Share Document