Condition health monitoring of composite wound pressure vessels using fiber Bragg gratings

2007 ◽  
Author(s):  
Xiaojing Zhang ◽  
Boming Zhang ◽  
Zhanjun Wu
Keyword(s):  
Health Monitoring ◽  
Fiber Bragg Gratings ◽  
Bragg Gratings ◽  
Pressure Vessels

Distributed sensing of carbon-epoxy composites and composite wound pressure vessels using fiber Bragg gratings

2003 ◽  
Author(s):  
Joseph Grant ◽  
Raj K. Kaul ◽  
Scott L. Taylor ◽  
George Myer ◽  
Kurt V. Jackson ◽  
...  
Keyword(s):  
Fiber Bragg Gratings ◽  
Bragg Gratings ◽  
Pressure Vessels ◽  
Distributed Sensing ◽  
Epoxy Composites

Distributed sensing of carbon-epoxy composites and filament wound pressure vessels using fiber-bragg gratings

2002 ◽  
Author(s):  
Joseph Grant ◽  
Raj K. Kaul ◽  
Scott L. Taylor ◽  
George Myer ◽  
Kurt V. Jackson ◽  
...  
Keyword(s):  
Fiber Bragg Gratings ◽  
Bragg Gratings ◽  
Pressure Vessels ◽  
Distributed Sensing ◽  
Epoxy Composites ◽  
Filament Wound

Feature-guided wave-based health monitoring of bent plates using fiber Bragg gratings

2016 ◽  
Vol 28 (9) ◽  
pp. 1211-1220 ◽  
Author(s):  
Pabitro Ray ◽  
Prabhu Rajagopal ◽  
Balaji Srinivasan ◽  
Krishnan Balasubramaniam
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Guided Waves ◽  
Fiber Bragg Gratings ◽  
Bragg Gratings ◽  
Guided Wave ◽  
Destructive Testing ◽  
Plate Structures ◽  
Structural Health ◽  
Bent Plates

Harnessing of ultrasonic guided waves confined in local features such as bends and welds, known as feature-guided waves, has emerged as a promising technique for non-destructive testing and structural health monitoring of industrial and aerospace structures. This article introduces a fiber Bragg grating based technique which uses feature-guided waves to detect anomalies or defects in plate structures with transverse bends. We are able to obtain good consistency between simulation and experimental results, both in the case of defect-free bent plates and those with transverse defects. Such results establish fiber Bragg gratings as a viable alternative to conventional techniques for structural health monitoring of bent plates.

scholarly journals Assessment of embedded fiber Bragg gratings for structural health monitoring of composites

2016 ◽  
Vol 16 (3) ◽  
pp. 262-275 ◽  
Author(s):  
Mike Yeager ◽  
Michael Todd ◽  
William Gregory ◽  
Chris Key
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Composite Structures ◽  
Fiber Bragg Gratings ◽  
Bragg Gratings ◽  
Fiber Reinforced Polymer ◽  
System Level ◽  
Fiber Reinforced ◽  
Structural Health ◽  
Reinforced Polymer

This work provides a system-level investigation into the use of embedded fiber Bragg grating optical sensors as a viable sensing architecture for the structural health monitoring of composite structures. The practical aspects of the embedding process are documented for both carbon fiber–reinforced polymer and glass fiber–reinforced polymer structures manufactured by both oven vacuum bag and vacuum-assisted resin transfer method processes. Initially, embedded specimens were subject to long-term water submersion to verify performance in an underwater environment. A larger, more complex jointed specimen was also fabricated with a fully embedded sensor network of fiber Bragg gratings and subjected to incrementally induced bearing damage. Using commercially available interrogation hardware, a damage detection structural health monitoring algorithm was developed and deployed. The results permit statistically precise detection of low levels of connection damage in the composite specimen.

Sign in / Sign up

Export Citation Format

Share Document