Vibration-based damage detection for filament wound pressure vessel filled with fluid

2008 ◽  
Author(s):  
W. Zhou ◽  
Z. Wu ◽  
H. Li
Keyword(s):  
Damage Detection ◽  
Pressure Vessel ◽  
Filament Wound

The Effects of Layer-by-Layer Thickness and Fiber Volume Fraction Variation on the Mechanical Performance of a Pressure Vessel

2018 ◽  
Author(s):  
Emre Özaslan ◽  
Ali Yetgin ◽  
Volkan Coşkun ◽  
Bülent Acar ◽  
Tarık Olğar
Keyword(s):  
Finite Element ◽  
Layer Thickness ◽  
Pressure Vessel ◽  
Fiber Volume Fraction ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
Element Model ◽  
Layer By Layer ◽  
Fiber Volume ◽  
Filament Wound

Due to high stiffness/weight ratio, composite materials are widely used in aerospace applications such as motor case of rockets which can be regarded as a pressure vessel. The most commonly used method to manufacture the pressure vessels is the wet filament winding. However, the mechanical performance of a filament wound pressure vessel directly depends on the manufacturing process, manufacturing site environmental condition and material properties of matrix and fiber. The designed ideal pressure vessel may not be manufactured because of the mentioned issues. Therefore, manufacturing of filament wound composite structures are based on manufacturing experience and experiment. In this study, the effect of layer-by-layer thickness and fiber volume fraction variation due to manufacturing process on the mechanical performance was investigated for filament wound pressure vessel with unequal dome openings. First, the finite element model was created for designed thickness dimensions and constant material properties for all layers. Then, the model was updated. The updated finite element model considered the layer-by-layer thickness and fiber volume fraction variation. Effects of the thickness and fiber volume fraction on the stress distribution along the motor axial direction were shown. Also hydrostatic pressurization test was performed to verify finite element analysis in terms of fiber direction strain through the motor case outer surface. Important aspects of analyzing a filament wound pressure vessel were addressed for designers.

The Effects of Layer-by-Layer Thickness and Fiber Volume Fraction Variation on the Mechanical Performance of a Pressure Vessel

2020 ◽  
Vol 142 (4) ◽  
Author(s):  
Emre Özaslan ◽  
Ali Yetgin ◽  
Bülent Acar ◽  
Volkan Coşkun ◽  
Tarık Olğar
Keyword(s):  
Finite Element ◽  
Pressure Vessel ◽  
Material Properties ◽  
Fiber Volume Fraction ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
Element Model ◽  
Layer By Layer ◽  
Fiber Volume ◽  
Filament Wound

Abstract Due to high stiffness/weight ratio, composite materials are widely used in aerospace applications such as motor case of rockets which can be regarded as a pressure vessel. The most commonly used method to manufacture pressure vessels is the wet filament winding. However, the mechanical performance of a filament wound pressure vessel directly depends on the manufacturing process, manufacturing site environmental condition, and material properties of matrix and fiber. The designed pressure vessel may not be manufactured because of the mentioned issues. Therefore, manufacturing of filament wound composite structures are based on manufacturing experience and experiment. In this study, effects of layer-by-layer thickness and fiber volume fraction variation due to manufacturing process on the mechanical performance were investigated for filament wound pressure vessel with unequal dome openings. First, the finite element model was created for designed thickness dimensions and constant material properties for all layers. Then, the model was updated. The updated finite element model considered the thickness of each layer separately and variation of fiber volume fraction between the layers. Effects of the thickness and fiber volume fraction on the stress distribution along the motor axial direction were shown. Also hydrostatic pressurization tests were performed to verify finite element analysis in terms of fiber direction strain through the motor case outer surface. Important aspects of analyzing a filament wound pressure vessel were addressed for designers.

Filament-wound pressure vessel with thick metal liner

1995 ◽  
Vol 32 (1-4) ◽  
pp. 313-323 ◽  
Author(s):  
J.M. Lifshitz ◽  
H. Dayan
Keyword(s):  
Pressure Vessel ◽  
Filament Wound ◽  
Metal Liner

Buckling Behaviour of Circular Ring Stiffened Filament Wound Composite Pressure Hull through Finite Element Analysis

2014 ◽  
Vol 656 ◽  
pp. 288-297
Author(s):  
Krishna Murari Pandey ◽  
Abhijit Dey ◽  
P.L. Choudhury
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Pressure Vessel ◽  
Failure Modes ◽  
Element Analysis ◽  
Finite Element Software ◽  
Filament Wound ◽  
Composite Pressure Vessel ◽  
Filament Wound Composite ◽  
Wound Composite

The aim of present study was investigate the buckling pressure of moderately thick-walled filament-wound carbon–epoxy stiffened composite pressure vessel subjected to external hydrostatic pressure through finite element analysis and compare the result with un-stiffened filament wound carbon/epoxy composite pressure vessel used in under water vehicle applications. The winding angles were [±30/90] FW, [±45/90] FW and [±60/90] FW. ANSYS 14.0 APDL, a commercial finite element software package successfully predicted the buckling pressure of filament-wound composite pressure vessel with a deviation much higher than the results of un-stiffened filament wound composite cylinder .All the finite element analysis shows that the composite pressure vessel with winding pattern [±60/90] FW has the higher value of critical buckling pressure. Major failure modes in both the analysis were dominated by the helical winding angles.

Sign in / Sign up

Export Citation Format

Share Document