A parallel architecture of interpolated timing recovery for high- speed data transfer rate and wide capture-range

2007 ◽  
Author(s):  
Satoru Higashino ◽  
Shoei Kobayashi ◽  
Tamotsu Yamagami
Keyword(s):  
Transfer Rate ◽  
High Speed ◽  
Data Transfer ◽  
Parallel Architecture ◽  
Timing Recovery ◽  
Data Transfer Rate ◽  
High Speed Data ◽  
Capture Range

High Speed Data Transfer System Based on the USB3.0 Technology

2014 ◽  
Vol 614 ◽  
pp. 381-384 ◽  
Author(s):  
Bang Qiang Long ◽  
Zhou Mo Zeng
Keyword(s):  
Data Structure ◽  
Transfer Rate ◽  
High Speed ◽  
Data Transfer ◽  
Data Acquisition System ◽  
Transfer System ◽  
Key Factors ◽  
Data Buffer ◽  
Storage Rate ◽  
High Speed Data

A data acquisition system is introduced based on FPGA and USB3.0 to achieved high transfer rate. FPGA control AD and manage the DDR RAM buffer. The USB connect model is synchronous Slave FIFO. The multi data buffer queue structure is selected as the data structure. The testing results show that the average storage rate is 229.1MByte/s.When using two hard disk, the rate can reach to 289.8MByte/s.Some key factors affect the transfer rate is also discussed.

High-Speed Tracking Method Using Zero Phase Error Tracking-Feed-Forward (ZPET-FF) Control for High-Data-Transfer-Rate Optical Disk Drives

2004 ◽  
Vol 43 (7B) ◽  
pp. 4811-4815 ◽  
Author(s):  
Daiichi Koide ◽  
Hitoshi Yanagisawa ◽  
Haruki Tokumaru ◽  
Shoichi Nakamura ◽  
Kiyoshi Ohishi ◽  
...  
Keyword(s):  
Transfer Rate ◽  
High Speed ◽  
Data Transfer ◽  
Phase Error ◽  
Disk Drives ◽  
Data Transfer Rate ◽  
Tracking Method ◽  
High Data ◽  
Speed Tracking ◽  
Zero Phase

Research and Application of High-Speed and Adjustable Synchronous Data Transfer System Based on USB 3.0 Peripheral Controller

2020 ◽  
pp. 2150118
Author(s):  
Junze Huang ◽  
Yueming Wang
Keyword(s):  
Transfer Rate ◽  
High Speed ◽  
Data Transfer ◽  
Hyperspectral Data ◽  
Data Block ◽  
Necessary Condition ◽  
Acquisition Time ◽  
Time Interval ◽  
Transfer System ◽  
Data Transfer Rate

Since bulk transfer bandwidth of the host is unstable, the universal serial bus (USB) 3.0 hyperspectral data transfer system can only achieve a data transfer rate of about 30 MBps which is less than one-fifteenth of USB 3.0 theoretical transfer rate of 5 Gbps. For aerial hyperspectral imager, data transfer system is required to meet different frame rates of detector for different speed-to-height ratios. In this paper, we propose a high-speed and adjustable synchronous transfer system. The USB 3.0 peripheral controller uses synchronous first in first out (FIFO) and automatic direct memory access (DMA) to achieve the highest data transfer bandwidth. The USB acquisition software collects a data block in every fixed time interval. The size in bytes of every data block must be an integer multiple of the maximum data packet payload size, which is a necessary condition for using automatic DMA and bulk transfers. The data transfer rate of the system could be adjusted by directly changing the data block size and acquisition time interval. The experimental results show that the synchronous transfer mechanism could facilitate the 100-MBps error-free and high data transfer bandwidth application on a hyperspectral data processing system.

scholarly journals Dual-shot dynamics and ultimate frequency of all-optical magnetic recording on GdFeCo

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Sicong Wang ◽  
Chen Wei ◽  
Yuanhua Feng ◽  
Hongkun Cao ◽  
Wenzhe Li ◽  
...  
Keyword(s):  
Magnetization Reversal ◽  
Energy Efficient ◽  
High Speed ◽  
Data Transfer ◽  
Laser Pulses ◽  
Time Resolved ◽  
All Optical ◽  
Fs Laser ◽  
High Speed Data ◽  
Natural Way

AbstractAlthough photonics presents the fastest and most energy-efficient method of data transfer, magnetism still offers the cheapest and most natural way to store data. The ultrafast and energy-efficient optical control of magnetism is presently a missing technological link that prevents us from reaching the next evolution in information processing. The discovery of all-optical magnetization reversal in GdFeCo with the help of 100 fs laser pulses has further aroused intense interest in this compelling problem. Although the applicability of this approach to high-speed data processing depends vitally on the maximum repetition rate of the switching, the latter remains virtually unknown. Here we experimentally unveil the ultimate frequency of repetitive all-optical magnetization reversal through time-resolved studies of the dual-shot magnetization dynamics in Gd27Fe63.87Co9.13. Varying the intensities of the shots and the shot-to-shot separation, we reveal the conditions for ultrafast writing and the fastest possible restoration of magnetic bits. It is shown that although magnetic writing launched by the first shot is completed after 100 ps, a reliable rewriting of the bit by the second shot requires separating the shots by at least 300 ps. Using two shots partially overlapping in space and minimally separated by 300 ps, we demonstrate an approach for GHz magnetic writing that can be scaled down to sizes below the diffraction limit.

scholarly journals Time-averaging of high-speed data transfer protocols

2005 ◽  
Vol 50 (12) ◽  
pp. 2065-2069 ◽  
Author(s):  
R. Marquez ◽  
E. Altman ◽  
S. Sole-Alvarez
Keyword(s):  
High Speed ◽  
Data Transfer ◽  
Time Averaging ◽  
High Speed Data

Optical Waveguides Embedded in PCBs - A Real World Application of 3D Structures Written by TPA

2007 ◽  
Vol 1054 ◽  
Author(s):  
Ruth Houbertz ◽  
Herbert Wolter ◽  
Volker Schmidt ◽  
Ladislav Kuna ◽  
Valentin Satzinger ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Optical Waveguides ◽  
High Speed ◽  
Printed Circuit Boards ◽  
Data Transfer ◽  
Laser Pulses ◽  
Photon Absorption ◽  
Optical Data ◽  
Direct Laser ◽  
High Speed Data

ABSTRACTThe integration of optical interconnects in printed circuit boards (PCB) is a rapidly growing field worldwide due to a continuously increasing need for high-speed data transfer. There are any concepts discussed, among which are the integration of optical fibers or the generation of waveguides by UV lithography, embossing, or direct laser writing. The devices presented so far require many different materials and process steps, but particularly also highly-sophisticated assembly steps in order to couple the optoelectronic elements to the generated waveguides. In order to overcome these restrictions, an innovative approach is presented which allows the embedding of optoelectronic components and the generation of optical waveguides in only one optical material. This material is an inorganic-organic hybrid polymer, in which the waveguides are processed by two-photon absorption (TPA) processes, initiated by ultra-short laser pulses. In particular, due to this integration and the possibility ofin situpositioning the optical waveguides with respect to the optoelectronic components by the TPA process, no complex packaging or assembly is necessary. Thus, the number of necessary processing steps is significantly reduced, which also contributes to the saving of resources such as energy or solvents. The material properties and the underlying processes will be discussed with respect to optical data transfer in PCBs.

Miniature Two-Axis Actuator for High-Data-Transfer-Rate Optical Data Storage System

2002 ◽  
Vol 41 (Part 1, No. 3B) ◽  
pp. 1804-1807 ◽  
Author(s):  
Gakuji Hashimoto ◽  
Hiroki Shima ◽  
Kenji Yamamoto ◽  
Tsutomu Maruyama ◽  
Takashi Nakao ◽  
...  
Keyword(s):  
Data Storage ◽  
Transfer Rate ◽  
Data Transfer ◽  
Storage System ◽  
Optical Data Storage ◽  
Optical Data ◽  
Data Transfer Rate ◽  
High Data ◽  
Data Storage System

Design of Data Transfer System Based on PCI Express Interface Applied in High-Speed Railway

2012 ◽  
Vol 229-231 ◽  
pp. 1543-1546
Author(s):  
Xiao Bo Zhou ◽  
Min Xia ◽  
Hai Long Cheng
Keyword(s):  
Data Acquisition ◽  
Data Transmission ◽  
High Speed ◽  
Data Transfer ◽  
Transmission Method ◽  
High Speed Railway ◽  
Pci Express ◽  
Data Acquisition Card ◽  
High Speed Data Acquisition ◽  
High Speed Data

To improve data transmission performance of the data acquisition card, a design of high-speed data transmission system is proposed in the thesis. Using FPGA of programmable logic devices, adopting Verilog HDL of hardware description language, the design of modularization and DMA transmission method is implemented in FPGA. Eventually the design implements the data transmission with high-speed through PCI Express interface. Through simulation and verification based on hardware system, this design is proved to be feasible and can satisfy the performance requirements of data transmission in the high-speed data acquisition card applied in high-speed railway communication. The design also has some value of application and reference for a universal data acquisition card.

Detecting Malicious Switches for a Secure Software-defined Tactile Internet

2021 ◽  
Vol 21 (4) ◽  
pp. 1-23
Author(s):  
Bin Yuan ◽  
Chen Lin ◽  
Deqing Zou ◽  
Laurence Tianruo Yang ◽  
Hai Jin
Keyword(s):  
High Speed ◽  
Data Transfer ◽  
Low Cost ◽  
Rapid Development ◽  
Denial Of Service ◽  
Linear Structure ◽  
Network Layers ◽  
High Speed Data ◽  
Network Status ◽  
Sdn Controller

The rapid development of the Internet of Things has led to demand for high-speed data transformation. Serving this purpose is the Tactile Internet, which facilitates data transfer in extra-low latency. In particular, a Tactile Internet based on software-defined networking (SDN) has been broadly deployed because of the proven benefits of SDN in flexible and programmable network management. However, the vulnerabilities of SDN also threaten the security of the Tactile Internet. Specifically, an SDN controller relies on the network status (provided by the underlying switches) to make network decisions, e.g., calculating a routing path to deliver data in the Tactile Internet. Hence, the attackers can compromise the switches to jeopardize the SDN and further attack Tactile Internet systems. For example, an attacker can compromise switches to launch distributed denial-of-service attacks to overwhelm the SDN controller, which will disrupt all the applications in the Tactile Internet. In pursuit of a more secure Tactile Internet, the problem of abnormal SDN switches in the Tactile Internet is analyzed in this article, including the cause of abnormal switches and their influences on different network layers. Then we propose an approach that leverages the messages sent by all switches to identify abnormal switches, which adopts a linear structure to store historical messages at a relatively low cost. By mapping each flow message to the flow establishment model, our method can effectively identify malicious SDN switches in the Tactile Internet and thus enhance its security.

Sign in / Sign up

Export Citation Format

Share Document