Finding concealed high-atomic numbered materials hidden in cargo containers using dual energy high-energy x-rays from a linear accelerator with the unique signature from photofission

2006 ◽  
Author(s):  
James E. Clayton ◽  
Paul Bjorkholm
Keyword(s):  
Linear Accelerator ◽  
High Energy ◽  
Dual Energy ◽  
X Rays ◽  
Unique Signature ◽  
Cargo Containers

scholarly journals Vertical intensity modulation for improved radiographic penetration and reduced exclusion zone

2016 ◽  
Vol 44 ◽  
pp. 1660213 ◽  
Author(s):  
J. Bendahan ◽  
W.G.J. Langeveld ◽  
V. Bharadwaj ◽  
J. Amann ◽  
C. Limborg ◽  
...  
Keyword(s):  
Electron Beam ◽  
High Energy ◽  
Dual Energy ◽  
X Rays ◽  
Exclusion Zone ◽  
Bremsstrahlung Radiation ◽  
Radiographic Images ◽  
Power Sources ◽  
X Ray ◽  
Energy Beam

In the present work, a method to direct the X-ray beam in real time to the desired locations in the cargo to increase penetration and reduce exclusion zone is presented. Cargo scanners employ high energy X-rays to produce radiographic images of the cargo. Most new scanners employ dual-energy to produce, in addition to attenuation maps, atomic number information in order to facilitate the detection of contraband. The electron beam producing the bremsstrahlung X-ray beam is usually directed approximately to the center of the container, concentrating the highest X-ray intensity to that area. Other parts of the container are exposed to lower radiation levels due to the large drop-off of the bremsstrahlung radiation intensity as a function of angle, especially for high energies (>6 MV). This results in lower penetration in these areas, requiring higher power sources that increase the dose and exclusion zone. The capability to modulate the X-ray source intensity on a pulse-by-pulse basis to deliver only as much radiation as required to the cargo has been reported previously. This method is, however, controlled by the most attenuating part of the inspected slice, resulting in excessive radiation to other areas of the cargo. A method to direct a dual-energy beam has been developed to provide a more precisely controlled level of required radiation to highly attenuating areas. The present method is based on steering the dual-energy electron beam using magnetic components on a pulse-to-pulse basis to a fixed location on the X-ray production target, but incident at different angles so as to direct the maximum intensity of the produced bremsstrahlung to the desired locations. The details of the technique and subsystem and simulation results are presented.

scholarly journals Photoneutron spectrometry by novel multi-directional spherical neutron spectrometry system

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mehdi Sohrabi ◽  
Amir Hakimi
Keyword(s):  
Linear Accelerator ◽  
Low Cost ◽  
Science And Technology ◽  
High Energy ◽  
High Dose ◽  
X Rays ◽  
Neutron Spectrometry ◽  
Medical Linear Accelerator ◽  
Technology Applications ◽  
Different Diameters

AbstractNeutron spectrometry in science and technology applications in general and accurate exotic photoneutron (PN) dosimetry of cancer patients undergoing high-dose high-energy X-rays therapy in medical accelerators in particular is of vital need. In this study, a novel passive multi-directional multi-detector neutron spectrometry system was developed and home-made using 6 polycarbonate/10B detectors on 6 sides of polyethylene (PE) cubes used bare and also embedded at center of PE spheres of 8 different diameters. The system provided well-resolved unfolded directional PN spectra showing thermal and fast PN peaks of 6 sides and mean spectrum in 5 field sizes at isocenter and other locations in 18 MV Siemens ONCOR medical linear accelerator bunker. The neutron spectrometry system developed has unique characteristics such as being simple, efficient, low cost, practical, and insensitive to low-LET radiation with well-resolved directional and mean spectra easily applicable in medicine, health, environment, science and technology in developing and developed laboratories.

The Basic Physical Principles of Ion, Electron, and X-Ray Detectors and Their Application to Microanalysis

1985 ◽  
Vol 43 ◽  
pp. 154-157
Author(s):  
A.J. Tousimis
Keyword(s):  
Ion Beam ◽  
Depth Resolution ◽  
Sample Surface ◽  
High Energy ◽  
X Rays ◽  
X Ray ◽  
Electrons And Ions ◽  
Spatial Depth ◽  
Minimum Surface Area ◽  
Physical Principles

An integral and of prime importance of any microtopography and microanalysis instrument system is its electron, x-ray and ion detector(s). The resolution and sensitivity of the electron microscope (TEM, SEM, STEM) and microanalyzers (SIMS and electron probe x-ray microanalyzers) are closely related to those of the sensing and recording devices incorporated with them.Table I lists characteristic sensitivities, minimum surface area and depth analyzed by various methods. Smaller ion, electron and x-ray beam diameters than those listed, are possible with currently available electromagnetic or electrostatic columns. Therefore, improvements in sensitivity and spatial/depth resolution of microanalysis will follow that of the detectors. In most of these methods, the sample surface is subjected to a stationary, line or raster scanning photon, electron or ion beam. The resultant radiation: photons (low energy) or high energy (x-rays), electrons and ions are detected and analyzed.

“Cartography” in 7-Dimensions at CHESS: Mapping of Structure in Real Space, Reciprocal Space, and Time Using High-Energy X-rays

2020 ◽  
Vol 33 (6) ◽  
pp. 11-16
Author(s):  
K. E. Nygren, ◽  
D. C. Pagan, ◽  
J. P. C. Ruff ◽  
E. Arenholz ◽  
J. D. Brock
Keyword(s):  
High Energy ◽  
Real Space ◽  
Reciprocal Space ◽  
X Rays ◽  
Space And Time

scholarly journals Dual-Energy Computed Tomography of the Liver: Uses in Clinical Practices and Applications

Diagnostics ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 161
Author(s):  
Masakatsu Tsurusaki ◽  
Keitaro Sofue ◽  
Masatoshi Hori ◽  
Kosuke Sasaki ◽  
Kazunari Ishii ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Liver Tumors ◽  
Energy Levels ◽  
Ct Scanning ◽  
Dual Energy ◽  
Liver Imaging ◽  
X Rays ◽  
Clinical Practices ◽  
Dual Energy Computed Tomography ◽  
Noise Ratio

Dual-energy computed tomography (DECT) is an imaging technique based on data acquisition at two different energy settings. Recent advances in CT have allowed data acquisitions and simultaneous analyses of X-rays at two energy levels, and have resulted in novel developments in the field of abdominal imaging. The use of low and high X-ray tube voltages in DECT provide fused images that improve the detection of liver tumors owing to the higher contrast-to-noise ratio (CNR) of the tumor compared with the liver. The use of contrast agents in CT scanning improves image quality by enhancing the CNR and signal-to-noise ratio while reducing beam-hardening artifacts. DECT can improve detection and characterization of hepatic abnormalities, including mass lesions. The technique can also be used for the diagnosis of steatosis and iron overload. This article reviews and illustrates the different applications of DECT in liver imaging.

scholarly journals The interstellar medium in young supernova remnants: key to the production of cosmic X-rays and $\gamma $-rays

2021 ◽  
Vol 366 (6) ◽  
Author(s):  
Hidetoshi Sano ◽  
Yasuo Fukui
Keyword(s):  
Interstellar Medium ◽  
Supernova Remnants ◽  
Cosmic Ray ◽  
High Energy ◽  
X Rays ◽  
Interstellar Gas ◽  
High Energy Radiation ◽  
Dense Cores ◽  
The Relationship ◽  
Turbulent Velocity Field

AbstractWe review recent progress in elucidating the relationship between high-energy radiation and the interstellar medium (ISM) in young supernova remnants (SNRs) with ages of ∼2000 yr, focusing in particular on RX J1713.7−3946 and RCW 86. Both SNRs emit strong nonthermal X-rays and TeV $\gamma $ γ -rays, and they contain clumpy distributions of interstellar gas that includes both atomic and molecular hydrogen. We find that shock–cloud interactions provide a viable explanation for the spatial correlation between the X-rays and ISM. In these interactions, the supernova shocks hit the typically pc-scale dense cores, generating a highly turbulent velocity field that amplifies the magnetic field up to 0.1–1 mG. This amplification leads to enhanced nonthermal synchrotron emission around the clumps, whereas the cosmic-ray electrons do not penetrate the clumps. Accordingly, the nonthermal X-rays exhibit a spatial distribution similar to that of the ISM on the pc scale, while they are anticorrelated at sub-pc scales. These results predict that hadronic $\gamma $ γ -rays can be emitted from the dense cores, resulting in a spatial correspondence between the $\gamma $ γ -rays and the ISM. The current pc-scale resolution of $\gamma $ γ -ray observations is too low to resolve this correspondence. Future $\gamma $ γ -ray observations with the Cherenkov Telescope Array will be able to resolve the sub-pc-scale $\gamma $ γ -ray distribution and provide clues to the origin of these cosmic $\gamma $ γ -rays.

scholarly journals Combination of Dual-Energy X-ray Transmission and Variable Gas-Ejection for the In-Line Automatic Sorting of Many Types of Scrap in One Measurement

2021 ◽  
Vol 11 (10) ◽  
pp. 4349
Author(s):  
Tianzhong Xiong ◽  
Wenhua Ye ◽  
Xiang Xu
Keyword(s):  
High Efficiency ◽  
Nearest Neighbor ◽  
High Energy ◽  
Dual Energy ◽  
Center Of Gravity ◽  
Low Energy ◽  
Identification Accuracy ◽  
Flow Process ◽  
X Ray ◽  
Automatic Sorting

As an important part of pretreatment before recycling, sorting has a great impact on the quality, efficiency, cost and difficulty of recycling. In this paper, dual-energy X-ray transmission (DE-XRT) combined with variable gas-ejection is used to improve the quality and efficiency of in-line automatic sorting of waste non-ferrous metals. A method was proposed to judge the sorting ability, identify the types, and calculate the mass and center-of-gravity coordinates according to the shading of low-energy, the line scan direction coordinate and transparency natural logarithm ratio of low energy to high energy (R_value). The material identification was satisfied by the nearest neighbor algorithm of effective points in the material range to the R_value calibration surface. The flow-process of identification was also presented. Based on the thickness of the calibration surface, the material mass and center-of-gravity coordinates were calculated. The feasibility of controlling material falling points by variable gas-ejection was analyzed. The experimental verification of self-made materials showed that identification accuracy by count basis was 85%, mass and center-of-gravity coordinates calculation errors were both below 5%. The method proposed features high accuracy, high efficiency, and low operation cost and is of great application value even to other solid waste sorting, such as plastics, glass and ceramics.

scholarly journals Introducing the HD+B model for pulsar wind nebulae: a hybrid hydrodynamics/radiative approach

2020 ◽  
Vol 494 (3) ◽  
pp. 4357-4370
Author(s):  
B Olmi ◽  
D F Torres
Keyword(s):  
Gamma Ray ◽  
High Energy ◽  
Theoretical Modelling ◽  
X Rays ◽  
Pulsar Wind Nebulae ◽  
New Approach ◽  
Energy Gamma ◽  
Radiative Model ◽  
Pulsar Wind

ABSTRACT Identification and characterization of a rapidly increasing number of pulsar wind nebulae is, and will continue to be, a challenge of high-energy gamma-ray astrophysics. Given that such systems constitute -by far- the most numerous expected population in the TeV regime, such characterization is important not only to learn about the sources per se from an individual and population perspective, but also to be able to connect them with observations at other frequencies, especially in radio and X-rays. Also, we need to remove the emission from nebulae in highly confused regions of the sky for revealing other underlying emitters. In this paper, we present a new approach for theoretical modelling of pulsar wind nebulae: a hybrid hydrodynamic-radiative model able to reproduce morphological features and spectra of the sources, with relatively limited numerical cost.

Sign in / Sign up

Export Citation Format

Share Document