Improved one-dimensional constitutive model of superelastic shape memory alloy wires

2006 ◽  
Author(s):  
Wenjie Ren ◽  
Hongnan Li, Sr. ◽  
Gangbing Song
Keyword(s):  
Shape Memory Alloy ◽  
Constitutive Model ◽  
Shape Memory ◽  
One Dimensional

scholarly journals An analytical model for crack monitoring of the shape memory alloy intelligent concrete

2019 ◽  
Vol 31 (1) ◽  
pp. 100-116 ◽  
Author(s):  
Bingfei Liu ◽  
Qingfei Wang ◽  
Kai Yin ◽  
Liwen Wang
Keyword(s):  
Shape Memory Alloy ◽  
Constitutive Model ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Three Dimensional ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
Monitoring Model ◽  
Crack Monitoring ◽  
The One

A theoretical model for the crack monitoring of the shape memory alloy intelligent concrete is presented in this work. The mechanical properties of shape memory alloy materials are first given by the experimental test. The one-dimensional constitutive model of the shape memory alloys is reviewed by degenerating from a three-dimensional model, and the behaviors of the shape memory alloys under different working conditions are then discussed. By combining the electrical resistivity model and the one-dimensional shape memory alloy constitutive model, the crack monitoring model of the shape memory alloy intelligent concrete is given, and the relationships between the crack width of the concrete and the electrical resistance variation of the shape memory alloy materials for different crack monitoring processes of shape memory alloy intelligent concrete are finally presented. The numerical results of the present model are compared with the published experimental data to verify the correctness of the model.

UNCERTAINTY ANALYSIS OF A ONE-DIMENSIONAL CONSTITUTIVE MODEL FOR SHAPE MEMORY ALLOY THERMOMECHANICAL DESCRIPTION

2014 ◽  
Vol 06 (06) ◽  
pp. 1450067 ◽  
Author(s):  
SERGIO A. OLIVEIRA ◽  
MARCELO A. SAVI ◽  
ILMAR F. SANTOS
Keyword(s):  
Experimental Data ◽  
Shape Memory Alloy ◽  
Constitutive Model ◽  
Uncertainty Analysis ◽  
Numerical Simulations ◽  
Shape Memory ◽  
Tensile Tests ◽  
One Dimensional ◽  
Uncertainty Range ◽  
Constitutive Parameters

The use of shape memory alloys (SMAs) in engineering applications has increased the interest of the accuracy analysis of their thermomechanical description. This work presents an uncertainty analysis related to experimental tensile tests conducted with shape memory alloy wires. Experimental data are compared with numerical simulations obtained from a constitutive model with internal constraints employed to describe the thermomechanical behavior of SMAs. The idea is to evaluate if the numerical simulations are within the uncertainty range of the experimental data. Parametric analysis is also developed showing the most sensitive constitutive parameters that contribute to the uncertainty. This analysis provides the contribution of each parameter establishing the accuracy of the constitutive equations.

scholarly journals One-Dimensional Constitutive Model of Shape Memory Alloy with an Empirical Kinetics Equation

2011 ◽  
Vol 2011 ◽  
pp. 1-14 ◽  
Author(s):  
Lei Li ◽  
Qingbin Li ◽  
Fan Zhang
Keyword(s):  
Plastic Deformation ◽  
Phase Transformation ◽  
Shape Memory Alloy ◽  
Constitutive Model ◽  
Shape Memory ◽  
Uniaxial Tension ◽  
Experimental Results ◽  
Kinetics Equation ◽  
One Dimensional ◽  
Niti Sma

Characteristics of NiTi shape memory alloy (SMA) and its constitutive model with an empirical kinetics equation were investigated in this paper. Firstly, the transformation characters of the NiTi SMA were obtained through a differential scanning calorimetry (DSC) analysis technology, and the properties during incomplete and discontinuous transformation process and the effects of plastic deformation on the transformation were studied. The uniaxial tension, SME, and constrained recovery process of NiTi SMA were examined through an improved 10KN universal material testing machine. Experimental results indicated that the phase transformation characters and the mechanical properties could be affected by the loading process considerably, and the plastic deformation should be taken into account. To simulate the characteristics of NiTi SMA more effectively, a one-dimensional constitutive model derived from the internal variable approach with the consideration of the plastic deformation was constructed based on the DSC and the uniaxial tension experimental results, and a new simple empirical kinetics equation was presented, with the transformation temperature parameters redefined according to the DSC experiment evidence. Comparison between the numerical and experimental results indicated that this constitutive model could simulate the phase transformation characters, the uniaxial tension, SME, and the constrained recovery behavior of NiTi SMA well.

Shape memory alloy–actuated prestressed composites with application to morphing automotive fender skirts

2018 ◽  
Vol 30 (3) ◽  
pp. 479-494 ◽  
Author(s):  
Venkata Siva C Chillara ◽  
Leon M Headings ◽  
Ryohei Tsuruta ◽  
Eiji Itakura ◽  
Umesh Gandhi ◽  
...  
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Smart Materials ◽  
Design Procedure ◽  
Building Blocks ◽  
Smart Composite ◽  
Thermally Induced ◽  
One Dimensional ◽  
Flat Shape

This work presents smart laminated composites that enable morphing vehicle structures. Morphing panels can be effective for drag reduction, for example, adaptive fender skirts. Mechanical prestress provides tailored curvature in composites without the drawbacks of thermally induced residual stress. When driven by smart materials such as shape memory alloys, mechanically-prestressed composites can serve as building blocks for morphing structures. An analytical energy-based model is presented to calculate the curved shape of a composite as a function of force applied by an embedded actuator. Shape transition is modeled by providing the actuation force as an input to a one-dimensional thermomechanical constitutive model of a shape memory alloy wire. A design procedure, based on the analytical model, is presented for morphing fender skirts comprising radially configured smart composite elements. A half-scale fender skirt for a compact passenger car is designed, fabricated, and tested. The demonstrator has a domed unactuated shape and morphs to a flat shape when actuated using shape memory alloys. Rapid actuation is demonstrated by coupling shape memory alloys with integrated quick-release latches; the latches reduce actuation time by 95%. The demonstrator is 62% lighter than an equivalent dome-shaped steel fender skirt.

A constitutive model for Fe-based shape memory alloy considering martensitic transformation and plastic sliding coupling: Application to a finite element structural analysis

2012 ◽  
Vol 23 (10) ◽  
pp. 1143-1160 ◽  
Author(s):  
Walid Khalil ◽  
Alain Mikolajczak ◽  
Céline Bouby ◽  
Tarak Ben Zineb
Keyword(s):  
Finite Element ◽  
Phase Transformation ◽  
Structural Analysis ◽  
Shape Memory Alloy ◽  
Constitutive Model ◽  
Shape Memory ◽  
Internal Variables ◽  
Thermomechanical Loading ◽  
Proposed Model ◽  
Numerical Tool

In this article, we propose a finite element numerical tool adapted to a Fe-based shape memory alloy structural analysis, based on a developed constitutive model that describes the effect of phase transformation, plastic sliding, and their interactions on the thermomechanical behavior. This model was derived from an assumed expression of the Gibbs free energy taking into account nonlinear interaction quantities related to inter- and intragranular incompatibilities as well as mechanical and chemical quantities. Two scalar internal variables were considered to describe the phase transformation and plastic sliding effects. The hysteretic and specific behavior patterns of Fe-based shape memory alloy during reverse transformation were studied by assuming a dissipation expression. The proposed model effectively describes the complex thermomechanical loading paths. The numerical tool derived from the implicit resolution of the nonlinear partial derivative constitutive equations was implemented into the Abaqus® finite element code via the User MATerial (UMAT) subroutine. After tests to verify the model for homogeneous and heterogeneous thermomechanical loadings, an example of Fe-based shape memory alloy application was studied, which corresponds to a tightening system made up of fishplates for crane rails. The results we obtained were compared to experimental ones.

Sign in / Sign up

Export Citation Format

Share Document