FePt nanocomposite films for optical-magnetic hybrid recording media

2005 ◽  
Author(s):  
F. J. Yang ◽  
Hao Wang ◽  
H. B. Wang ◽  
X. Cao ◽  
J. A. Wang ◽  
...  
2010 ◽  
Vol 123-125 ◽  
pp. 27-30 ◽  
Author(s):  
Chih Long Shen ◽  
Po Cheng Kuo ◽  
S.C. Chen ◽  
C.D. Chen ◽  
S.L. Hsu ◽  
...  

The Co3Pt magnetic layer with thickness of 7~28 nm was deposited onto the Pt underlayer. The as-deposited Co3Pt/Pt double-layered films with or without a 5 nm Pt capped layer were annealed at temperatures between 275 and 375 °C in vacuum of 1 mTorr. The influences of process parameters on perpendicular magnetic properties of Co3Pt thin films were investigated. The Co3Pt film with perpendicular coercivity (Hc⊥) value of 3620 Oe and the perpendicular squareness (S⊥) of 0.7 could be achieved from the Co3Pt(18 nm)/Pt(100 nm) double-layered films by annealing at 300°C. Further added Tb30Co70 film on the Co3Pt/Pt double-layered film could greatly enhance the perpendicular magnetic properties of the film. The Hc⊥ and S⊥ of the Tb30Co70/Co3Pt/Pt film were as high as 6560 Oe and 0.88, respectively, which has significant potential to be applied in perpendicular magnetic recording media.


2005 ◽  
Author(s):  
Zuoyi Li ◽  
Xiaomin Cheng ◽  
Fang Jin ◽  
Zhen Li ◽  
Gengqi Lin ◽  
...  

2008 ◽  
Author(s):  
J. B. Yan ◽  
Z. Y. Li ◽  
K. F. Dong ◽  
P. Li ◽  
G. Q. Lin ◽  
...  

2006 ◽  
Vol 505 (1-2) ◽  
pp. 77-80 ◽  
Author(s):  
Hao Wang ◽  
S.X. Xue ◽  
F.J. Yang ◽  
H.B. Wang ◽  
X. Cao ◽  
...  

2001 ◽  
Vol 90 (6) ◽  
pp. 3112-3114 ◽  
Author(s):  
V. Karanasos ◽  
I. Panagiotopoulos ◽  
D. Niarchos ◽  
H. Okumura ◽  
G. C. Hadjipanayis

2008 ◽  
Author(s):  
X. M. Cheng ◽  
X. S. Miao ◽  
X. F. Yang ◽  
Z. Li ◽  
G. Q. Lin ◽  
...  

2007 ◽  
Vol 7 (1) ◽  
pp. 206-224 ◽  
Author(s):  
Y. F. Xu ◽  
M. L. Yan ◽  
D. J. Sellmyer

High anisotropy L10 ordered FePt thin films are considered to have high potential for use as high areal density recording media, beyond 1 Tera bit/in2. In this paper, we review recent results on the synthesis and magnetic properties of L10 FePt nanocomposite films. Several fabrication methods have been developed to produce high-anisotropy FePt films: epitaxial and non-epitaxial growth of (001)-oriented FePt:X (X = Au, Ag, Cu, C, etc.) composite films that might be used for perpendicular media; monodispersed FePt nanocluster-assembled films grown with a gas-aggregation technique and having uniform cluster size and narrow size distribution; self-assembled FePt particles prepared with chemical synthesis by reduction/decomposition techniques, etc. The magnetic properties are controllable through variations in the nanocluster properties and nanostructure. FePt and related films show promise for development as heat-assisted magnetic recording media at extremely high areal densities. The self-assembled FePt arrays show potential for approaching the ultimate goal of single-grain-per-bit patterned media.


Author(s):  
M.A. Parker ◽  
K.E. Johnson ◽  
C. Hwang ◽  
A. Bermea

We have reported the dependence of the magnetic and recording properties of CoPtCr recording media on the thickness of the Cr underlayer. It was inferred from XRD data that grain-to-grain epitaxy of the Cr with the CoPtCr was responsible for the interaction observed between these layers. However, no cross-sectional TEM (XTEM) work was performed to confirm this inference. In this paper, we report the application of new techniques for preparing XTEM specimens from actual magnetic recording disks, and for layer-by-layer micro-diffraction with an electron probe elongated parallel to the surface of the deposited structure which elucidate the effect of the crystallographic structure of the Cr on that of the CoPtCr.XTEM specimens were prepared from magnetic recording disks by modifying a technique used to prepare semiconductor specimens. After 3mm disks were prepared per the standard XTEM procedure, these disks were then lapped using a tripod polishing device. A grid with a single 1mmx2mm hole was then glued with M-bond 610 to the polished side of the disk.


Sign in / Sign up

Export Citation Format

Share Document