The contrast of femtosecond laser speckles in the image plane

2005 ◽  
Author(s):  
Wenjun Liu ◽  
Changhe Zhou
Keyword(s):  
Femtosecond Laser ◽  
Image Plane ◽  
Laser Speckles

Femtosecond laser speckles

2005 ◽  
Vol 44 (30) ◽  
pp. 6506 ◽  
Author(s):  
Wenjun Liu ◽  
Changhe Zhou
Keyword(s):  
Femtosecond Laser ◽  
Laser Speckles

scholarly journals Robustness of Laser Speckles as Unique Traceable Markers of Metal Components

Digital ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 54-63
Author(s):  
Mikael Sjödahl ◽  
Erik Olsson
Keyword(s):  
Image Plane ◽  
Cotton Cloth ◽  
Steel Pipes ◽  
Digital Service ◽  
Detection Systems ◽  
Digital Fingerprint ◽  
Metal Sheets ◽  
Correct Pattern ◽  
Surface Compression ◽  
Laser Speckles

The traceability of manufactured components is growing in importance with the greater use of digital service solutions offered and with an increased digitalization of manufacturing logistics. In this paper, we investigate the use of image-plane laser speckles as a tool to acquire a unique code from the surface of the component and the ability to use this pattern as a secure component-specific digital fingerprint. Intensity correlation is used as a numerical identifier. Metal sheets of different materials and steel pipes are considered. It is found that laser speckles are robust against surface alterations caused by surface compression and scratching and that the correct pattern reappears from a surface contaminated by oil after cleaning. In this investigation, the detectability is close to 100% for all surfaces considered, with zero false positives. The exception is a heavily oxidized surface wiped by a cotton cloth between recordings. It is further found that the main source for lost detectability is caused by misalignment between the registration and detection geometries where a positive match is lost by a change in angle in the order of 60 mrad. Therefore, as long as the registration and detection systems, respectively, use the same optical arrangement, laser speckles have the ability to serve as unique component identifiers without having to add extra markings or a dedicated sensor to the component.

Measurements in 3D images

1991 ◽  
Vol 49 ◽  
pp. 408-409
Author(s):  
John C. Russ
Keyword(s):  
Three Dimensional ◽  
Image Plane ◽  
X Rays ◽  
Traditional Use ◽  
3D Images ◽  
Confocal Scanning Laser Microscope ◽  
Hard Materials ◽  
Depth Direction ◽  
Confocal Scanning ◽  
Confocal Scanning Laser

Three-dimensional (3D) images consisting of arrays of voxels can now be routinely obtained from several different types of microscopes. These include both the transmission and emission modes of the confocal scanning laser microscope (but not its most common reflection mode), the secondary ion mass spectrometer, and computed tomography using electrons, X-rays or other signals. Compared to the traditional use of serial sectioning (which includes sequential polishing of hard materials), these newer techniques eliminate difficulties of alignment of slices, and maintain uniform resolution in the depth direction. However, the resolution in the z-direction may be different from that within each image plane, which makes the voxels non-cubic and creates some difficulties for subsequent analysis.

Comparison of Conventional and Electron Spectroscopic Imaging in the Fixed Beam Electron Microscope of Ordered Protein Arrays

1985 ◽  
Vol 43 ◽  
pp. 74-75
Author(s):  
E. L. Buhle ◽  
U. Aebi
Keyword(s):  
Image Processing ◽  
Electron Microscope ◽  
High Resolution ◽  
Image Plane ◽  
Electron Spectroscopic Imaging ◽  
Protein Arrays ◽  
Beam Electron ◽  
Average Unit ◽  
Fixed Beam ◽  
Energy Components

CTEM brightfield images are formed by a combination of relatively high resolution elastically scattered electrons and unscattered and inelastically scattered electrons. In the case of electron spectroscopic images (ESI), the inelastically scattered electrons cause a loss of both contrast and spatial resolution in the image. In the case of ESI imaging on the Zeiss EM902, the transmited electrons are dispersed into their various energy components by passing them through a magnetic prism spectrometer; a slit is then placed in the image plane of the prism to select the electrons of a given energy loss for image formation. The purpose of this study was to compare CTEM with ESI images recorded on a Zeiss EM902 of ordered protein arrays. Digital image processing was employed to analyze the average unit cell morphologies of the two types of images.

The restoration of blurred electron micrographs

1986 ◽  
Vol 44 ◽  
pp. 180-181
Author(s):  
Bridget Carragher ◽  
David A. Bluemke ◽  
Michael J. Potel ◽  
Robert Josephs
Keyword(s):  
Cross Section ◽  
Electron Micrographs ◽  
Relative Motion ◽  
Finite Thickness ◽  
Image Plane ◽  
Helical Axis ◽  
Thin Sections ◽  
Structural Details

We have investigated the feasibility of restoring blurred electron micrographs. Two related problems have been considered; the restoration of images blurred as a result of relative motion between the specimen and the image plane, and the restoration of images which are rotationally blurred about an axis. Micrographs taken while the specimen is drifting result in images which are blurred in the direction of motion. An example of rotational blurring arises in micrographs of thin sections of helical particles viewed in cross section. The twist of the particle within the finite thickness of the section causes the image to appear rotationally blurred about the helical axis. As a result, structural details, particularly at large distances from the helical axis, will be obscured.

Electron holography of p-n junctions

1996 ◽  
Vol 54 ◽  
pp. 974-975
Author(s):  
B.G. Frost ◽  
D.C. Joy ◽  
L.F. Allard ◽  
E. Voelkl
Keyword(s):  
Electron Beam ◽  
Electron Microscope ◽  
Field Emission ◽  
Ccd Camera ◽  
Image Plane ◽  
Reference Wave ◽  
Field Of View ◽  
Control Mode ◽  
Objective Lens ◽  
Electron Holography

A wide holographic field of view (up to 15 μm in the Hitachi-HF2000) is achieved in a TEM by switching off the objective lens and imaging the sample by the first intermediate lens. Fig.1 shows the corresponding ray diagram for low magnification image plane off-axis holography. A coherent electron beam modulated by the sample in its amplitude and its phase is superimposed on a plane reference wave by a negatively biased Möllenstedt-type biprism.Our holograms are acquired utilizing a Hitachi HF-2000 field emission electron microscope at 200 kV. Essential for holography are a field emission gun and an electron biprism. At low magnification, the excitation of each lens must be appropriately adjusted by the free lens control mode of the microscope. The holograms are acquired by a 1024 by 1024 slow-scan CCD-camera and processed by the “Holoworks” software. The hologram fringes indicate positively and negatively charged areas in a sample by the direction of the fringe bending (Fig.2).

Five-Dimensional Microscopy using Widefield-Deconvolution: Practical Considerations and Biological Applications

1996 ◽  
Vol 54 ◽  
pp. 268-269
Author(s):  
W.F. Marshall ◽  
K. Oegema ◽  
J. Nunnari ◽  
A.F. Straight ◽  
D.A. Agard ◽  
...  
Keyword(s):  
Confocal Microscopy ◽  
High Speed ◽  
Laser Scanning ◽  
Ccd Camera ◽  
Image Plane ◽  
Time Lapse ◽  
Laser Scanning Confocal Microscopy ◽  
Three Dimensions ◽  
Excitation Light ◽  
Cooled Ccd

The ability to image cells in three dimensions has brought about a revolution in biological microscopy, enabling many questions to be asked which would be inaccessible without this capability. There are currently two major methods of three dimensional microscopy: laser-scanning confocal microscopy and widefield-deconvolution microscopy. The method of widefield-deconvolution uses a cooled CCD to acquire images from a standard widefield microscope, and then computationally removes out of focus blur. Using such a scheme, it is easy to acquire time-lapse 3D images of living cells without killing them, and to do so for multiple wavelengths (using computer-controlled filter wheels). Thus, it is now not only feasible, but routine, to perform five dimensional microscopy (three spatial dimensions, plus time, plus wavelength).Widefield-deconvolution has several advantages over confocal microscopy. The two main advantages are high speed of acquisition (because there is no scanning, a single optical section is acquired at a time by using a cooled CCD camera) and the use of low excitation light levels Excitation intensity can be much lower than in a confocal microscope for three reasons: 1) longer exposures can be taken since the entire 512x512 image plane is acquired in parallel, so that dwell time is not an issue, 2) the higher quantum efficiently of a CCD detect over those typically used in confocal microscopy (although this is expected to change due to advances in confocal detector technology), and 3) because no pinhole is used to reject light, a much larger fraction of the emitted light is collected. Thus we can typically acquire images with thousands of photons per pixel using a mercury lamp, instead of a laser, for illumination. The use of low excitation light is critical for living samples, and also reduces bleaching. The high speed of widefield microscopy is also essential for time-lapse 3D microscopy, since one must acquire images quickly enough to resolve interesting events.

Quantitative analysis by reconstruction of HREM focal series

1994 ◽  
Vol 52 ◽  
pp. 740-741
Author(s):  
W. Coene ◽  
A. Thust ◽  
M. Op de Beeck ◽  
D. Van Dyck
Keyword(s):  
Phase Retrieval ◽  
Image Plane ◽  
Initial Guess ◽  
Recursive Least Squares ◽  
Objective Lens ◽  
Electron Wave ◽  
Electron Sources ◽  
Original Algorithm ◽  
Coherent Field ◽  
Direct Interpretation

Compared to conventional electron sources, the use of a highly coherent field-emission gun (FEG) in TEM improves the information resolution considerably. A direct interpretation of this extra information, however, is hampered since amplitude and phase of the electron wave are scrambled in a complicated way upon transfer from the specimen exit plane through the objective lens towards the image plane. In order to make the additional high-resolution information interpretable, a phase retrieval procedure is applied, which yields the aberration-corrected electron wave from a focal series of HRTEM images (Coene et al, 1992).Kirkland (1984) tackled non-linear image reconstruction using a recursive least-squares formalism in which the electron wave is modified stepwise towards the solution which optimally matches the contrast features in the experimental through-focus series. The original algorithm suffers from two major drawbacks : first, the result depends strongly on the quality of the initial guess of the first step, second, the processing time is impractically high.

Tandem scanning confocal light microscopy as compared with x-ray diffraction for characterizing the behavior of clays in fluid-saturated petroleum reservoir rock

1989 ◽  
Vol 47 ◽  
pp. 148-149
Author(s):  
C.J. Stuart ◽  
B.E. Viani ◽  
J. Walker ◽  
T.H. Levesque
Keyword(s):  
Light Microscopy ◽  
Image Plane ◽  
Reservoir Rock ◽  
Depth Of Field ◽  
Objective Lens ◽  
Scanning System ◽  
Light Sources ◽  
Petroleum Reservoir ◽  
Image Recording ◽  
Scan Speed

Many techniques of imaging used to characterize petroleum reservoir rocks are applied to dehydrated specimens. In order to directly study behavior of fines in reservoir rock at conditions similar to those found in-situ these materials need to be characterized in a fluid saturated state.Standard light microscopy can be used on wet specimens but depth of field and focus cannot be obtained; by using the Tandem Scanning Confocal Microscope (TSM) images can be produced from thin focused layers with high contrast and resolution. Optical sectioning and extended focus images are then produced with the microscope. The TSM uses reflected light, bulk specimens, and wet samples as opposed to thin section analysis used in standard light microscopy. The TSM also has additional advantages: the high scan speed, the ability to use a variety of light sources to produce real color images, and the simple, small size scanning system. The TSM has frame rates in excess of normal TV rates with many more lines of resolution. This is accomplished by incorporating a method of parallel image scanning and detection. The parallel scanning in the TSM is accomplished by means of multiple apertures in a disk which is positioned in the intermediate image plane of the objective lens. Thousands of apertures are distributed in an annulus, so that as the disk is spun, the specimen is illuminated simultaneously by a large number of scanning beams with uniform illumination. The high frame speeds greatly simplify the task of image recording since any of the normally used devices such as photographic cameras, normal or low light TV cameras, VCR or optical disks can be used without modification. Any frame store device compatible with a standard TV camera may be used to digitize TSM images.

Sign in / Sign up

Export Citation Format

Share Document