Image resolution limits resulting from mechanical vibrations

Abstract Limited spatial resolution and low signal to noise ratio are some of the main challenges in optical signal observation, especially for photon emission microscopy. As dynamic emission signals are generated in a 3D space, the use of the time dimension in addition to space enables a better localization of switching events. It can actually be used to infer information with a precision above the resolution limits of the acquired signals. Taking advantage of this property, we report on a post-acquisition processing scheme to generate emission images with a better image resolution than the initial acquisition.

Download Full-text

The Resolution and Contrast in Biological Sections Determined by Inelastic and Elastic Scattering

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071569 ◽

1973 ◽

Vol 31 ◽

pp. 224-225

Author(s):

D. L. Misell

Keyword(s):

Electron Microscopy ◽

Adverse Effect ◽

Elastic Scattering ◽

Inelastic Scattering ◽

Amorphous Carbon ◽

Polymeric Materials ◽

Chromatic Aberration ◽

Image Resolution ◽

Quantitative Estimates ◽

Elastic Ratio

In the electron microscopy of biological sections the adverse effect of chromatic aberration on image resolution is well known. In this paper calculations are presented for the inelastic and elastic image intensities using a wave-optical formulation. Quantitative estimates of the deterioration in image resolution as a result of chromatic aberration are presented as an alternative to geometric calculations. The predominance of inelastic scattering in the unstained biological and polymeric materials is shown by the inelastic to elastic ratio, I/E, within an objective aperture of 0.005 rad for amorphous carbon of a thickness, t=50nm, typical of biological sections; E=200keV, I/E=16.

Download Full-text

In situ REM imaging of surface processes on ceramic bulk crystals from 300 to 1670 K in a conventional TEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100087616 ◽

1991 ◽

Vol 49 ◽

pp. 660-661

Author(s):

Z. L. Wang ◽

J. Bentley

Keyword(s):

High Temperatures ◽

Image Resolution ◽

Atomic Processes ◽

Crystal Surfaces ◽

Beam Radiation ◽

Surface Areas ◽

Transmission Electron ◽

Reflection Electron Microscopy ◽

Gas Reactions

Studying the behavior of surfaces at high temperatures is of great importance for understanding the properties of ceramics and associated surface-gas reactions. Atomic processes occurring on bulk crystal surfaces at high temperatures can be recorded by reflection electron microscopy (REM) in a conventional transmission electron microscope (TEM) with relatively high resolution, because REM is especially sensitive to atomic-height steps.Improved REM image resolution with a FEG: Cleaved surfaces of a-alumina (012) exhibit atomic flatness with steps of height about 5 Å, determined by reference to a screw (or near screw) dislocation with a presumed Burgers vector of b = (1/3)<012> (see Fig. 1). Steps of heights less than about 0.8 Å can be clearly resolved only with a field emission gun (FEG) (Fig. 2). The small steps are formed by the surface oscillating between the closely packed O and Al stacking layers. The bands of dark contrast (Fig. 2b) are the result of beam radiation damage to surface areas initially terminated with O ions.

Download Full-text

Magnetic Domain Observation of an Amorphous Fe-Si-B Ribbon by Means of a High Voltage Scanning Electron Microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100098113 ◽

1981 ◽

Vol 39 ◽

pp. 320-321

Author(s):

K. Tsuno ◽

Y. Harada ◽

T. Sato

Keyword(s):

Electron Microscope ◽

Scanning Electron Microscope ◽

High Voltage ◽

Amorphous Ribbon ◽

Image Resolution ◽

Objective Lens ◽

Magnetic Domains ◽

Scattered Electron ◽

Voltage Scanning ◽

Scanning Electron

Magnetic domains of ferromagnetic amorphous ribbon have been observed using Bitter powder method. However, the domains of amorphous ribbon are very complicated and the surface of ribbon is not flat, so that clear domain image has not been obtained. It has been desired to observe more clear image in order to analyze the domain structure of this zero magnetocrystalline anisotropy material. So, we tried to observe magnetic domains by means of a back-scattered electron mode of high voltage scanning electron microscope (HVSEM).HVSEM method has several advantages compared with the ordinary methods for observing domains: (1) high contrast (0.9, 1.5 and 5% at 50, 100 and 200 kV) (2) high penetration depth of electrons (0.2, 1.5 and 8 μm at 50, 100 and 200 kV). However, image resolution of previous HVSEM was quite low (maximum magnification was less than 100x), because the objective lens cannot be excited for avoiding the application of magnetic field on the specimen.

Download Full-text

Low-voltage, high-resolution scanning electron microscopy of polymers

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100127037 ◽

1987 ◽

Vol 45 ◽

pp. 466-467 ◽

Cited By ~ 1

Author(s):

S. J. Krause ◽

W.W. Adams ◽

S. Kumar ◽

T. Reilly ◽

T. Suziki

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

Low Voltage ◽

Chromatic Aberration ◽

Image Resolution ◽

Resolution Limit ◽

Crossover Point ◽

New Generation ◽

Beam Damage ◽

Scanning Electron

Scanning electron microscopy (SEM) of polymers at routine operating voltages of 15 to 25 keV can lead to beam damage and sample image distortion due to charging. Imaging polymer samples with low accelerating voltages (0.1 to 2.0 keV), at or near the “crossover point”, can reduce beam damage, eliminate charging, and improve contrast of surface detail. However, at low voltage, beam brightness is reduced and image resolution is degraded due to chromatic aberration. A new generation of instruments has improved brightness at low voltages, but a typical SEM with a tungsten hairpin filament will have a resolution limit of about 100nm at 1keV. Recently, a new field emission gun (FEG) SEM, the Hitachi S900, was introduced with a reported resolution of 0.8nm at 30keV and 5nm at 1keV. In this research we are reporting the results of imaging coated and uncoated polymer samples at accelerating voltages between 1keV and 30keV in a tungsten hairpin SEM and in the Hitachi S900 FEG SEM.

Download Full-text

The use of an energy-filtering electron microscope to reduce chromatic aberration in images of thick biological specimens

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100142116 ◽

1986 ◽

Vol 44 ◽

pp. 88-91

Author(s):

L. D. Peachey ◽

J. P. Heath ◽

G. Lamprecht

Keyword(s):

Electron Microscopy ◽

Transmission Electron Microscopy ◽

Electron Beam ◽

Cross Section ◽

Electron Scattering ◽

Chromatic Aberration ◽

Image Resolution ◽

Incident Electron Energy ◽

Energy Filtering ◽

Transmission Electron

Biological specimens of cells and tissues generally are considerably thicker than ideal for high resolution transmission electron microscopy. Actual image resolution achieved is limited by chromatic aberration in the image forming electron lenses combined with significant energy loss in the electron beam due to inelastic scattering in the specimen. Increased accelerating voltages (HVEM, IVEM) have been used to reduce the adverse effects of chromatic aberration by decreasing the electron scattering cross-section of the elements in the specimen and by increasing the incident electron energy.

Download Full-text