Disbond detection in adhesively bonded structures using piezoelectric wafer active sensors

2004 ◽  
Author(s):  
Adrian Cuc ◽  
Victor Giurgiutiu
Keyword(s):  
Adhesively Bonded ◽  
Active Sensors ◽  
Piezoelectric Wafer Active Sensors ◽  
Piezoelectric Wafer ◽  
Disbond Detection ◽  
Adhesively Bonded Structures

Impact Localization on a Composite Plate With Unknown Material Properties Using PWAS Transducers and Wavelet Transform

2017 ◽  
Author(s):  
Asaad Migot ◽  
Victor Giurgiutiu
Keyword(s):  
Wavelet Transform ◽  
Nonlinear Equations ◽  
Material Properties ◽  
Composite Plate ◽  
Linear Equations ◽  
Active Sensors ◽  
Piezoelectric Wafer Active Sensors ◽  
Piezoelectric Wafer ◽  
The Impact ◽  
Impact Localization

In this work, an impact experiment on a composite plate with unknown material properties (its group velocity profile is unknown) is implemented to localize the impact points. A pencil lead break is used to generate acoustic emission (AE) signals which are acquired by six piezoelectric wafer active sensors (PWAS). These sensors are distributed with a particular configuration in two clusters on the plate. The time of flight (TOF) of acquired signals is estimated at the starting points of these signals. The continuous wavelet transform (CWT) of received signals are calculated with AGU Vallen wavelet program to get the accurate values of the TOF of these signals. Two methods are used for determining the coordinates of impact points (localization the impact point). The first method is the new technique (method 1) by Kundu. This technique has two linear equations with two unknowns (the coordinate of AE source point). The second method is the nonlinear algorithm (method 2). This algorithm has a set of six nonlinear equations with five unknowns. Two MATLAB codes are implemented separately to solve the linear and nonlinear equations. The results show good indications for the location of impact points in both methods. The location errors of calculated impact points are divided by constant distance to get independent percentage errors with the site of the coordinate.

Impact Detection Using an Array of Piezoelectric Wafer Active Sensors and a Microcontroller Unit

2010 ◽  
Author(s):  
Abraham Light-Marquez ◽  
Andrei Zagrai
Keyword(s):  
Structural Health Monitoring ◽  
Sensor Network ◽  
Health Monitoring ◽  
Detection System ◽  
Active Sensors ◽  
Structural Health ◽  
Impact Detection ◽  
Piezoelectric Wafer Active Sensors ◽  
Piezoelectric Wafer ◽  
The Impact

This report discusses the development of an embeddable impact detection system utilizing an array of piezoelectric wafer active sensors (PWAS) and a microcontroller. Embeddable systems are a critical component to successfully implement a complete and robust structural health monitoring system. System capabilities include impact detection, impact location determination and digitization of the impact waveform. A custom algorithm was developed to locate the site of the impact.. The embedded system has the potential for additional capabilities including advanced signal processing and the integration of wireless functionality. For structural health monitoring applications it is essential to determine the extent of damage done to the structure. In an attempt to determine these parameters a series of impact tests were conducted using a ball drop tower on a square aluminum plate. The response of the plate to the impact event was recorded using a piezoelectric wafer sensor network attached to the surface of the plate. From this testing it was determined that several of the impact parameters are directly correlated with the features recorded by the sensor network.

Sign in / Sign up

Export Citation Format

Share Document