Effect of photoacid generator additives on the dissolution behavior of bis-trifluoromethyl carbinol substituted polynorbornene

2004 ◽  
Author(s):  
Trevor Hoskins ◽  
Cody M. Berger ◽  
Peter J. Ludovice ◽  
Clifford L. Henderson ◽  
Larry D. Seger ◽  
...  
Keyword(s):  
Dissolution Behavior ◽  
Photoacid Generator

Solving the Problem of Silicon Dioxide Melting Based on Deviation Model

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Yuhan Sun
Keyword(s):  
Silicon Dioxide ◽  
Blast Furnace Slag ◽  
Melting Process ◽  
Melting Rate ◽  
Dissolution Behavior ◽  
Characteristic Parameters ◽  
Contour Feature ◽  
Time Periods ◽  
Main Component ◽  
Furnace Slag

Abstract: In order to reveal the dissolution behavior of iron tailings in blast furnace slag, we studied the main component of silica in iron tailings. First, edge contour features need to be established to represent the melting process of silica. We choose shape, perimeter, area and generalized radius as objects. By independently analyzing the influence of these four indexes on the melting rate, the area and shape were selected as the characteristic parameters of the edge contour of the silica particles. Then, the actual melting rate of the silica is estimated by the edge contour feature index. Finally, we can calculate the melting rate of the first second of three time periods of 0.00010312mm3/s，0.0002399mm3/s，0.0000538mm3/s.

Dissolution behavior of 2-ethylanthraquinone in various neat solvents: Solubility, correlation and thermodynamic analysis

2019 ◽  
Vol 289 ◽  
pp. 111122
Author(s):  
Hongxin Bai ◽  
Xiangchen Fang ◽  
Chong Peng ◽  
Quanjie Liu ◽  
Weibin Xie ◽  
...  
Keyword(s):  
Thermodynamic Analysis ◽  
Dissolution Behavior

scholarly journals Synthesis of KAlSiO4 by Hydrothermal Processing on Biotite Syenite and Dissolution Reaction Kinetics

Minerals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 36
Author(s):  
Jiangyan Yuan ◽  
Hongwen Ma ◽  
Zheng Luo ◽  
Xi Ma ◽  
Qian Guo
Keyword(s):  
Reaction Rate ◽  
Reaction Order ◽  
Dissolution Behavior ◽  
Precipitation Process ◽  
Hydrothermal Processing ◽  
Hydrothermal Conditions ◽  
Effective Utilization ◽  
Comprehensive Utilization ◽  
Dissolution Reaction ◽  
Significant Process

To make potassium from K-bearing rocks accessible to agriculture, processing on biotite syenite powder under mild alkaline hydrothermal conditions was carried out, in which two types of KAlSiO4 were obtained successfully. The dissolution-precipitation process of silicate rocks is a significant process in lithospheric evolution. Its effective utilization will be of importance for realizing the comprehensiveness of aluminosilicate minerals in nature. Two kinds of KAlSiO4 were precipitated in sequence during the dissolution process of biotite syenite. The crystal structures of two kinds of KAlSiO4 were compared by Rietveld structure refinements. The kinetics model derived from geochemical research was adopted to describe the dissolution behavior. The reaction order and apparent activation energy at the temperature range of 240–300 °C were 2.992 and 97.41 kJ/mol, respectively. The higher dissolution reaction rate of K-feldspar mainly relies on the alkaline solution, which gives rise to higher reaction order. During the dissolution-precipitation process of K-feldspar, two types of KAlSiO4 with different crystal structure were precipitated. This study provides novel green chemical routes for the comprehensive utilization of potassium-rich silicates.

scholarly journals Long-Acting Risperidone Dual Control System: Preparation, Characterization and Evaluation In Vitro and In Vivo

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1210
Author(s):  
Xieguo Yan ◽  
Shiqiang Wang ◽  
Kaoxiang Sun
Keyword(s):  
Drug Loading ◽  
Entrapment Efficiency ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
In Vivo Evaluation ◽  
Long Term Treatment ◽  
Long Acting

Schizophrenia, a psychiatric disorder, requires long-term treatment; however, large fluctuations in blood drug concentration increase the risk of adverse reactions. We prepared a long-term risperidone (RIS) implantation system that can stabilize RIS release and established in-vitro and in-vivo evaluation systems. Cumulative release, drug loading, and entrapment efficiency were used as evaluation indicators to evaluate the effects of different pore formers, polymer ratios, porogen concentrations, and oil–water ratios on a RIS implant (RIS-IM). We also built a mathematical model to identify the optimized formulation by stepwise regression. We also assessed the crystalline changes, residual solvents, solubility and stability after sterilization, in-vivo polymer degradation, pharmacokinetics, and tissue inflammation in the case of the optimized formulation. The surface of the optimized RIS microspheres was small and hollow with 134.4 ± 3.5 µm particle size, 1.60 SPAN, 46.7% ± 2.3% implant drug loading, and 93.4% entrapment efficiency. The in-vitro dissolution behavior of RIS-IM had zero-order kinetics and stable blood concentration; no lag time was released for over three months. Furthermore, the RIS-IM was not only non-irritating to tissues but also had good biocompatibility and product stability. Long-acting RIS-IMs with microspheres and film coatings can provide a new avenue for treating schizophrenia.

scholarly journals Onium Salt Type Photoacid Generator Containing Tetrakis(pentafluorophenyl)borate.

2000 ◽  
Vol 13 (5) ◽  
pp. 711-714 ◽  
Author(s):  
Jong Soo Lee ◽  
Nobukazu Miyagawa ◽  
Shigeru Takahara ◽  
Tsuguo Yamaoka
Keyword(s):  
Onium Salt ◽  
Photoacid Generator
Sign in / Sign up

Export Citation Format

Share Document