Enhancement measurement of pulmonary nodules with multirow detector CT: precision assessment of a 3D algorithm compared to the standard procedure

2003 ◽  
Author(s):  
Dag Wormanns ◽  
Ernst Klotz ◽  
Gerhard Kohl ◽  
Uwe Dregger ◽  
Stefan Diederich ◽  
...  
2004 ◽  
Vol 15 (1) ◽  
pp. 14-22 ◽  
Author(s):  
Dag Wormanns ◽  
Karl Ludwig ◽  
Florian Beyer ◽  
Walter Heindel ◽  
Stefan Diederich

Author(s):  
J. Liu ◽  
N. D. Theodore ◽  
D. Adams ◽  
S. Russell ◽  
T. L. Alford ◽  
...  

Copper-based metallization has recently attracted extensive research because of its potential application in ultra-large-scale integration (ULSI) of semiconductor devices. The feasibility of copper metallization is, however, limited due to its thermal stability issues. In order to utilize copper in metallization systems diffusion barriers such as titanium nitride and other refractory materials, have been employed to enhance the thermal stability of copper. Titanium nitride layers can be formed by annealing Cu(Ti) alloy film evaporated on thermally grown SiO2 substrates in an ammonia ambient. We report here the microstructural evolution of Cu(Ti)/SiO2 layers during annealing in NH3 flowing ambient.The Cu(Ti) films used in this experiment were prepared by electron beam evaporation onto thermally grown SiO2 substrates. The nominal composition of the Cu(Ti) alloy was Cu73Ti27. Thermal treatments were conducted in NH3 flowing ambient for 30 minutes at temperatures ranging from 450°C to 650°C. Cross-section TEM specimens were prepared by the standard procedure.


Author(s):  
J. M. Zuo ◽  
A. L. Weickenmeier ◽  
R. Holmestad ◽  
J. C. H. Spence

The application of high order reflections in a weak diffraction condition off the zone axis center, including those in high order laue zones (HOLZ), holds great promise for structure determination using convergent beam electron diffraction (CBED). It is believed that in this case the intensities of high order reflections are kinematic or two-beam like. Hence, the measured intensity can be related to the structure factor amplitude. Then the standard procedure of structure determination in crystallography may be used for solving unknown structures. The dynamic effect on HOLZ line position and intensity in a strongly diffracting zone axis is well known. In a weak diffraction condition, the HOLZ line position may be approximated by the kinematic position, however, it is not clear whether this is also true for HOLZ intensities. The HOLZ lines, as they appear in CBED patterns, do show strong intensity variations along the line especially near the crossing of two lines, rather than constant intensity along the Bragg condition as predicted by kinematic or two beam theory.


Author(s):  
Avilash Carpenter ◽  
M.K. Gupta ◽  
Neetesh Kumar Jain ◽  
Urvashi Sharma ◽  
Rahul Sisodiya

Aim: The main of the study is to formulate and develop orally disintegrating fast dissolving tablet of Metoclopramide hydrochloride. Material & Methods: Before formulation and development of selected drug, the standard curve in buffer was prepared and absorbance at selected maxima was taken. Then two different disintegrating agents were selected and drug was mixed with disintegrating agents in different ratio. Various Preformulation parameters and evaluation of tablet i.e. disintegration time, dissolution time, friability, hardness, thickness were measured by standard procedure. Result & Discussion: The angle of repose for all the batches prepared. The values were found to be in the range of 30.46 to 36.45, which indicates good flow property for the powder blend according to the USP. The bulk density and tapped density for all the batches varied from 0.49 to 0.54 g/mL and 0.66 to 0.73, respectively. Carr’s index values were found to be in the range of 23.33 to 25.88, which is satisfactory for the powders as well as implies that the blends have good compressibility. Hausner ratio values obtained were in the range of 1.22 to 1.36, which shows a passable flow property for the powder blend based on the USP. The results for tablet thickness and height for all batches was found to range from 4.45 to 4.72 mm and 3.67 to 3.69 mm, respectively. Hardness or breaking force of tablets for all batches was found to range from 32.8 to 36.2 N. Tablet formulations must show good mechanical strength with sufficient hardness in order to handle shipping and transportation. Friability values for all the formulations were found to be in the range of 0.22 % to 0.30 %. Conclusion: Orally disintegrating tablets were compressed in order to have sufficient mechanical strength and integrity to withstand handling, shipping and transportation. The formulation was shown to have a rapid disintegration time that complied with the USP (less than one minute). The data obtained from the stability studies indicated that the orally disintegrating mini-tablets of MTH were stable under different environmental storage conditions. Keywords: Formulation & Development, Fast Dissolving Tablet, Metoclopramide, Anti-Emetic Drug, Oral Disintegrating Tablet


2020 ◽  
Vol 4 (2) ◽  
pp. 41-45
Author(s):  
Sadam Sulaiman Indabo ◽  
Rufai Zakari

Dermestes maculatus is a major pest of stored fish in Nigeria, fish is preserved with highly persistent synthetic chemicals. There have been an increasing effort at developing plant-based toxicants that are environmentally friendly. Therefore, this study was conducted to screen the leaf extract of Azadirachta indica for phytochemical constituents. The efficacy of the methanolic leaf extract of the plant against D. maculatus was also evaluated. The leaves of A. indica were obtained, processed and taken to laboratory for methanolic extraction. Phytochemical screening was carried out to identify saponins, flavonoids, alkaloids, tannins, steroids, cardiac glycosides, glycosides, triterpenes and carbohydrates using standard procedure.  Both clean and infested samples of smoke-dried Clarias gariepinus were purchased from Sabon Gari Market, Zaria. The infested samples were used as initial source of D. maculatus larvae. Range finding test was carried out prior to the bioassay. During the bioassay, clean un-infested fish samples were weighed and introduced into kilner jars and respective dosages of 0.2g, 0.4g, 0.6g and 0.8g of extract were added. Another set of fish samples without the extract were maintained as control. The experiment was arranged in Completely Randomized Design with three replicates. Fifteen larvae of D. maculatus were introduced into both treated and control containers and covered. Mortality was recorded after 24, 48, 72 and 96 hours. Data obtained revealed an increase in mortality with increasing dose and time. Mortality ranged from 1.67 to 11.00. Therefore, leaf extract of A. indica should be incorporated in the development of larvicide against D. maculatus.   


Author(s):  
Alper Alp ◽  
Hakan Akdam ◽  
Sabri Barutça ◽  
Nezih Meydan ◽  
Yavuz Yeniçerioğlu ◽  
...  

Author(s):  
Shanmugapriya K. ◽  
T. Murugan ◽  
Thayumanavan Tha

Medicinal plants plays a significant role in the pharmaceutical industry. In present scenario, the need is to explore, identify and utilize this new medicinal plant on one hand and, on the other, to help conserve the existing but threatened species of rare medicinal plant.This present research work was carry out for the first time in South India to analyse and estimate the biochemical profiles of various extracts of fresh parts of Gnaphalium polycaulon pers., plant. The biochemical composition such as total carbohydrates, total proteins, total lipids, total phenols, cholesterol, total chlorophylls and reducing sugar, sterols were estimated using the standard procedure in fresh plant material.The biochemical analysis of Gnaphalium polycaulon plant showed the presence of various phytochemicals. The results of the present study supplement the usage of the studied plant which possesses several bioactive compounds and used as food and also as medicine.The results of present studies demonstrated that Gnaphalium polycaulon plant could be a sourceof valuable information and a guideline for the scientists, researchers in India and also all over the world


Sign in / Sign up

Export Citation Format

Share Document