Computation of the ensemble channelized Hotelling observer signal-to-noise ratio for ordered-subset image reconstruction using noisy data

2003 ◽  
Author(s):  
Edward J. Soares ◽  
Howard C. Gifford ◽  
Stephen J. Glick
Keyword(s):  
Image Reconstruction ◽  
Signal To Noise Ratio ◽  
Noisy Data ◽  
Signal To Noise ◽  
Hotelling Observer ◽  
Noise Ratio ◽  
Channelized Hotelling Observer

MULTI-OBJECTIVE GA-OPTIMIZED INTERPOLATION KERNELS FOR RECONSTRUCTION OF HIGH RESOLUTION EMR IMAGES FROM LOW-SAMPLED K-SPACE DATA

2009 ◽  
Vol 08 (02) ◽  
pp. 127-140 ◽  
Author(s):  
D. BALASUBRAMANIAN ◽  
MURALI C. KRISHNA ◽  
R. MURUGESAN
Keyword(s):  
Image Reconstruction ◽  
Signal To Noise Ratio ◽  
Fitness Function ◽  
Computing Time ◽  
Reference Image ◽  
Signal To Noise ◽  
Multi Objective ◽  
Conflicting Objectives ◽  
Noise Ratio ◽  
Space Data

The low-frequency instrumentation and imaging capabilities facilitate electron magnetic resonance imaging (EMRI) as an emerging non-invasive imaging technology for mapping free radicals in biological systems. Unlike MRI, EMRI is implemented as a pure phase–phase encoding technique. The fast bio-clearance of the imaging agent and the requirement to reduce radio frequency power deposition dictate collection of reduced k-space samples, compromising the quality and resolution of the EMR images. The present work evaluates various interpolation kernels to generate larger k-space samples for image reconstruction, from the acquired reduced k-space samples. Using k-space EMR data sets, acquired for phantom as well as live mice, the proposed technique is critically evaluated by computing quality metrics viz. signal-to-noise ratio (SNR), standard deviation error (SDE), root mean square error (RMSE), peak signal-to-noise ratio (PSNR), contrast-to-noise ratio (CNR) and Lui's error function (F(I)). The quantitative evaluation of 24 different interpolation functions (including piecewise polynomial functions and many windowed sinc functions) to upsample the k-space data for the Fourier EMR image reconstruction shows that at the expense of a slight increase in computing time, the reconstructed images from upsampled data, produced using Spline-sinc, Welch-sinc, and Gaussian-sinc kernels, are closer to reference image with minimal distortion. Support of the interpolating kernel is a characteristic parameter deciding the quality of the reconstructed image and the time complexity. In this paper, a method to optimize the kernel support using genetic algorithm (GA) is also explored. Maximization of the fitness function has two conflicting objectives and it is approached as a multi-objective optimization problem.

scholarly journals High-Resolution Ultrasound Imaging Enabled by Random Interference and Joint Image Reconstruction

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6434
Author(s):  
Pavel Ni ◽  
Heung-No Lee
Keyword(s):  
High Resolution ◽  
Image Reconstruction ◽  
Ultrasound Imaging ◽  
Signal To Noise Ratio ◽  
Reconstruction Method ◽  
Signal To Noise ◽  
Joint Reconstruction ◽  
Reconstruction Scheme ◽  
Reconstruction Methods ◽  
Noise Ratio

In ultrasound, wave interference is an undesirable effect that degrades the resolution of the images. We have recently shown that a wavefront of random interference can be used to reconstruct high-resolution ultrasound images. In this study, we further improve the resolution of interference-based ultrasound imaging by proposing a joint image reconstruction scheme. The proposed reconstruction scheme utilizes radio frequency (RF) signals from all elements of the sensor array in a joint optimization problem to directly reconstruct the final high-resolution image. By jointly processing array signals, we significantly improved the resolution of interference-based imaging. We compare the proposed joint reconstruction method with popular beamforming techniques and the previously proposed interference-based compound method. The simulation study suggests that, among the different reconstruction methods, the joint reconstruction method has the lowest mean-squared error (MSE), the best peak signal-to-noise ratio (PSNR), and the best signal-to-noise ratio (SNR). Similarly, the joint reconstruction method has an exceptional structural similarity index (SSIM) of 0.998. Experimental studies showed that the quality of images significantly improved when compared to other image reconstruction methods. Furthermore, we share our simulation codes as an open-source repository in support of reproducible research.

Determination of the Best Emulsion for the Microscopy of Crystals

1981 ◽  
Vol 39 ◽  
pp. 32-33
Author(s):  
David A. Grano ◽  
Kenneth H. Downing
Keyword(s):  
Spatial Frequency ◽  
Information Transfer ◽  
Signal To Noise Ratio ◽  
Experimental Situation ◽  
Photographic Emulsion ◽  
Modulation Transfer ◽  
Signal To Noise ◽  
Frequency Space ◽  
Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

1981 ◽  
Vol 39 ◽  
pp. 226-227
Author(s):  
W. Kunath ◽  
K. Weiss ◽  
E. Zeitler
Keyword(s):  
Signal To Noise Ratio ◽  
Carbon Support ◽  
Electronic System ◽  
Optic Axis ◽  
Hollow Cone ◽  
Signal To Noise ◽  
Bright Field ◽  
Noise Ratio ◽  
Single Field ◽  
Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Speech Reception in the Presence of Classroom Noise

1979 ◽  
Vol 10 (4) ◽  
pp. 221-230 ◽  
Author(s):  
Veronica Smyth
Keyword(s):  
Signal To Noise Ratio ◽  
Learning Processes ◽  
Speech Discrimination ◽  
Signal To Noise ◽  
Speech Reception ◽  
Monosyllabic Words ◽  
Noise Ratio

Three hundred children from five to 12 years of age were required to discriminate simple, familiar, monosyllabic words under two conditions: 1) quiet, and 2) in the presence of background classroom noise. Of the sample, 45.3% made errors in speech discrimination in the presence of background classroom noise. The effect was most marked in children younger than seven years six months. The results are discussed considering the signal-to-noise ratio and the possible effects of unwanted classroom noise on learning processes.

Quantifying the Effects of Background Speech Babble on Preschool Children's Novel Word Learning in a Multisession Paradigm: A Preliminary Study

2020 ◽  
Vol 63 (1) ◽  
pp. 345-356
Author(s):  
Meital Avivi-Reich ◽  
Megan Y. Roberts ◽  
Tina M. Grieco-Calub
Keyword(s):  
Word Learning ◽  
Signal To Noise Ratio ◽  
Preschool Age ◽  
Exposure Condition ◽  
Signal To Noise ◽  
Verbal Recall ◽  
Referent Selection ◽  
Main Effect ◽  
Noise Ratio ◽  
Novel Word Learning

Purpose This study tested the effects of background speech babble on novel word learning in preschool children with a multisession paradigm. Method Eight 3-year-old children were exposed to a total of 8 novel word–object pairs across 2 story books presented digitally. Each story contained 4 novel consonant–vowel–consonant nonwords. Children were exposed to both stories, one in quiet and one in the presence of 4-talker babble presented at 0-dB signal-to-noise ratio. After each story, children's learning was tested with a referent selection task and a verbal recall (naming) task. Children were exposed to and tested on the novel word–object pairs on 5 separate days within a 2-week span. Results A significant main effect of session was found for both referent selection and verbal recall. There was also a significant main effect of exposure condition on referent selection performance, with more referents correctly selected for word–object pairs that were presented in quiet compared to pairs presented in speech babble. Finally, children's verbal recall of novel words was statistically better than baseline performance (i.e., 0%) on Sessions 3–5 for words exposed in quiet, but only on Session 5 for words exposed in speech babble. Conclusions These findings suggest that background speech babble at 0-dB signal-to-noise ratio disrupts novel word learning in preschool-age children. As a result, children may need more time and more exposures of a novel word before they can recognize or verbally recall it.

Sign in / Sign up

Export Citation Format

Share Document