scholarly journals X-ray zone plate fabrication using a focused ion beam

2001 ◽  
Author(s):  
Peter P. Ilinski ◽  
Barry P. Lai ◽  
Neil J. Bassom ◽  
Jason Donald ◽  
Gregory J. Athas
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Zone Plate ◽  
X Ray ◽  
Title X

3D Observation of Elemental Distribution of Si-Device using a Dedicated FIB/STEM System

2005 ◽  
Author(s):  
T. Yaguchi ◽  
M. Konno ◽  
T. Kamino ◽  
M. Ogasawara ◽  
K. Kaji ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Elemental Distribution ◽  
Multivariate Statistical ◽  
X Ray ◽  
Sample Rotation ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Elemental Maps

Abstract A technique for preparation of a pillar shaped sample and its multi-directional observation of the sample using a focused ion beam (FIB) / scanning transmission electron microscopy (STEM) system has been developed. The system employs an FIB/STEM compatible sample rotation holder with a specially designed rotation mechanism, which allows the sample to be rotated 360 degrees [1-3]. This technique was used for the three dimensional (3D) elemental mapping of a contact plug of a Si device in 90 nm technology. A specimen containing a contact plug was shaped to a pillar sample with a cross section of 200 nm x 200 nm and a 5 um length. Elemental analysis was performed with a 200 kV HD-2300 STEM equipped with the EDAX genesis Energy dispersive X-ray spectroscopy (EDX) system. Spectrum imaging combined with multivariate statistical analysis (MSA) [4, 5] was used to enhance the weak X-ray signals of the doped area, which contain a low concentration of As-K. The distributions of elements, especially the dopant As, were successfully enhanced by MSA. The elemental maps were .. reconstructed from the maps.

X-ray microfocusing by a Ti/Al multilayer zone plate and a Bragg-Fresnel lens

1998 ◽  
Author(s):  
Masaki Koike ◽  
Isao H. Suzuki ◽  
Satoshi Komiya
Keyword(s):  
Fresnel Lens ◽  
Zone Plate ◽  
X Ray ◽  
Title X

Oxidation of Alloy-X in Subcritical, Transition, and Supercritical Water

CORROSION ◽  
10.5006/3881 ◽  
2021 ◽  
Author(s):  
Zachary Karmiol ◽  
Dev Chidambaram
Keyword(s):  
Supercritical Water ◽  
Photoelectron Spectroscopy ◽  
Focused Ion Beam ◽  
Elevated Temperatures ◽  
Subcritical Water ◽  
Ion Beam ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Based Superalloy ◽  
Before And After

This work investigates the oxidation of a nickel based superalloy, namely Alloy X, in water at elevated temperatures: subcritical water at 261°C and 27 MPa, the transition between subcritical and supercritical water at 374°C and 27 MPa, and supercritical water at 380°C and 27 MPa for 100 hours. The morphology of the sample surfaces were studied using scanning electron microscopy coupled with focused ion beam milling, and the surface chemistry was investigated using X-ray diffraction, Raman spectroscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy before and after exposure studies. Surfaces of all samples were identified to comprise of a ferrite spinel containing aluminum.

High Conductivity FIB Deposited Metal

1995 ◽  
Vol 396 ◽  
Author(s):  
P.G. Blauner ◽  
A. Wagner
Keyword(s):  
Focused Ion Beam ◽  
High Efficiency ◽  
Ion Beam ◽  
Deposition Process ◽  
Gold Deposition ◽  
X Ray ◽  
Annealing Step ◽  
Deposited Metal ◽  
Major Application ◽  
Deposition Processes

AbstractThe ion beam induced metal deposition processes now employed by commercial focused ion beam (FIB) tools all demonstrate less than optimal characteristics for use in circuit repair, a major application of these tools. In particular, the processes have low efficiencies, the metals produced have poor conductivity, and some form of clean up is generally required to remove excess material surrounding the repair site. The gold deposition process developed for x-ray mask repair, in contrast, exhibits efficiencies 10-50 times higher with significantly less material deposited in unwanted areas. Unfortunately, the conductivity of the gold is even poorer than that of materials now used for FIB circuit repair.In this paper, an annealing step which improves the conductivity of FIB deposited Au is described. Results are presented demonstrating resistivities of 5-15 μΩ-cm while maintaining the high efficiency of the gold deposition process. The suitability of the process for use in FIB circuit repair is discussed.

Imaging of retina cellular and subcellular structures using ptychographic hard X-ray tomography

2021 ◽  
Vol 134 (19) ◽  
Author(s):  
Valerie Panneels ◽  
Ana Diaz ◽  
Cornelia Imsand ◽  
Manuel Guizar-Sicairos ◽  
Elisabeth Müller ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Plexiform Layer ◽  
Wild Type Mouse ◽  
Small Region ◽  
Mouse Retina ◽  
Imaging Method ◽  
Scanning Method ◽  
X Ray ◽  
Correlative Imaging

ABSTRACT Ptychographic hard X-ray computed tomography (PXCT) is a recent method allowing imaging with quantitative electron-density contrast. Here, we imaged, at cryogenic temperature and without sectioning, cellular and subcellular structures of a chemically fixed and stained wild-type mouse retina, including axons and synapses, with complete isotropic 3D information over tens of microns. Comparison with tomograms of degenerative retina from a mouse model of retinitis pigmentosa illustrates the potential of this method for analyzing disease processes like neurodegeneration at sub-200 nm resolution. As a non-destructive imaging method, PXCT is very suitable for correlative imaging. Within the outer plexiform layer containing the photoreceptor synapses, we identified somatic synapses. We used a small region inside the X-ray-imaged sample for further high-resolution focused ion beam/scanning electron microscope tomography. The subcellular structures of synapses obtained with the X-ray technique matched the electron microscopy data, demonstrating that PXCT is a powerful scanning method for tissue volumes of more than 60 cells and sensitive enough for identification of regions as small as 200 nm, which remain available for further structural and biochemical investigations.

scholarly journals Artifacts from manganese reduction in rock samples prepared by focused ion beam (FIB) slicing for X-ray microspectroscopy

2019 ◽  
Vol 8 (1) ◽  
pp. 97-111
Author(s):  
Dorothea S. Macholdt ◽  
Jan-David Förster ◽  
Maren Müller ◽  
Bettina Weber ◽  
Michael Kappl ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Oxidation States ◽  
X Ray ◽  
Scientific Debate ◽  
Rock Samples ◽  
Valence States ◽  
Scanning Transmission ◽  
Visualization Techniques

Abstract. The spatial distribution of transition metal valence states is of broad interest in the microanalysis of geological and environmental samples. An example is rock varnish, a natural manganese (Mn)-rich rock coating, whose genesis mechanism remains a subject of scientific debate. We conducted scanning transmission X-ray microscopy with near-edge X-ray absorption fine-structure spectroscopy (STXM-NEXAFS) measurements of the abundance and spatial distribution of different Mn oxidation states within the nano- to micrometer thick varnish crusts. Such microanalytical measurements of thin and hard rock crusts require sample preparation with minimal contamination risk. Focused ion beam (FIB) slicing was used to obtain ∼100–1000 nm thin wedge-shaped slices of the samples for STXM, using standard parameters. However, while this preparation is suitable for investigating element distributions and structures in rock samples, we observed artifactual modifications of the Mn oxidation states at the surfaces of the FIB slices. Our results suggest that the preparation causes a reduction of Mn4+ to Mn2+. We draw attention to this issue, since FIB slicing, scanning electron microscopy (SEM) imaging, and other preparation and visualization techniques operating in the kilo-electron-volt range are well-established in geosciences, but researchers are often unaware of the potential for the reduction of Mn and possibly other elements in the samples.

scholarly journals Fiducial marker application method for position alignment of in situ multimodal X-ray experiments and reconstructions

2016 ◽  
Vol 49 (2) ◽  
pp. 700-704 ◽  
Author(s):  
Paul A. Shade ◽  
David B. Menasche ◽  
Joel V. Bernier ◽  
Peter Kenesei ◽  
Jun-Sang Park ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Tensile Specimen ◽  
Material Behavior ◽  
Validation Data ◽  
Great Opportunity ◽  
Characterization Methods ◽  
X Ray ◽  
Multiple Data Sets

An evolving suite of X-ray characterization methods are presently available to the materials community, providing a great opportunity to gain new insight into material behavior and provide critical validation data for materials models. Two critical and related issues are sample repositioning during an in situ experiment and registration of multiple data sets after the experiment. To address these issues, a method is described which utilizes a focused ion-beam scanning electron microscope equipped with a micromanipulator to apply gold fiducial markers to samples for X-ray measurements. The method is demonstrated with a synchrotron X-ray experiment involving in situ loading of a titanium alloy tensile specimen.

Analysis of the Intermetallic Compound Formed in Hot Dip Aluminized Steel

2006 ◽  
Vol 15-17 ◽  
pp. 159-163 ◽  
Author(s):  
Kee Hyun Kim ◽  
Benny van Daele ◽  
Gustaaf Van Tendeloo ◽  
Yong Sug Chung ◽  
Jong Kyu Yoon
Keyword(s):  
Intermetallic Compound ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Liquid Aluminium ◽  
Thin Specimen ◽  
Tem Analysis ◽  
X Ray ◽  
Cell Parameters ◽  
Transmission Electron ◽  
Aluminized Steel

A hot dip aluminising process was carried out with a 1mm steel sheet dipped into the Al-10at.% Si melt in an automatic hot-dip simulator. When steel and liquid aluminium are in contact with each other, a thin intermetallic compound (IMC) is formed between the steel and the aluminium. The analysis and identification of the formation mechanism of the IMC is needed to manufacture the application products. Energy dispersive X-ray spectroscopy (EDX) and electron probe microanalysis (EPMA) are normally used to identify the phases of IMC. In the Al-Fe-Si system, numerous compounds with only slight differences in composition are formed. Consequently, EDX and EPMA are insufficient to confirm exactly the thin IMC with multiphases. In this study, transmission electron microscopy (TEM) analysis combined with EDX was used. The TEM sample was prepared with focused ion beam (FIB) sampling. The FIB lift-out technology is used to slice a very thin specimen with minimum contamination for TEM analysis. It is clearly shown that the IMC consists of Al-27 at. % Fe-10 at. % Si and is identified as Al8Fe2Si with a hexagonal unit cell (space group P63/mmc). The cell parameters are a= 1.2404nm and c= 2.6234nm.

Sign in / Sign up

Export Citation Format

Share Document