Measurement method for spectral responsivity of digital cameras with tone characteristics compensation per pixel

1999 ◽  
Author(s):  
Hiroaki Sugiura ◽  
Tetsuya Kuno ◽  
Narihiro Matoba ◽  
Hiroaki Ikeda
Keyword(s):  
Measurement Method ◽  
Digital Cameras ◽  
Spectral Responsivity

Outreach Opportunities Using the Instructional SEM at Iowa State University

1996 ◽  
Vol 54 ◽  
pp. 412-413
Author(s):  
L. S. Chumbley ◽  
M. Meyer ◽  
K. Fredrickson ◽  
F.C. Laabs
Keyword(s):  
Materials Science ◽  
State University ◽  
Digital Cameras ◽  
Audio Signals ◽  
Iowa State University ◽  
Cornell University ◽  
Sem Image ◽  
Local Schools ◽  
Materials Science And Engineering ◽  
Video And Audio

The development of a scanning electron microscope (SEM) suitable for instructional purposes has created a large number of outreach opportunities for the Materials Science and Engineering (MSE) Department at Iowa State University. Several collaborative efforts are presently underway with local schools and the Department of Curriculum and Instruction (C&I) at ISU to bring SEM technology into the classroom in a near live-time, interactive manner. The SEM laboratory is shown in Figure 1.Interactions between the laboratory and the classroom use inexpensive digital cameras and shareware called CU-SeeMe, Figure 2. Developed by Cornell University and available over the internet, CUSeeMe provides inexpensive video conferencing capabilities. The software allows video and audio signals from Quikcam™ cameras to be sent and received between computers. A reflector site has been established in the MSE department that allows eight different computers to be interconnected simultaneously. This arrangement allows us to demonstrate SEM principles in the classroom. An Apple Macintosh has been configured to allow the SEM image to be seen using CU-SeeMe.

Analysis of significant measures for thermal conductivity

2020 ◽  
pp. 35-42
Author(s):  
Yuri P. Zarichnyak ◽  
Vyacheslav P. Khodunkov
Keyword(s):  
Thermal Conductivity ◽  
Heat Flux ◽  
Surface Heat Flux ◽  
Heat Flux Density ◽  
Measurement Method ◽  
Conductivity Measurement ◽  
Surface Heat ◽  
Measuring Instrument ◽  
New Class ◽  
Achievable Accuracy

The analysis of a new class of measuring instrument for heat quantities based on the use of multi-valued measures of heat conductivity of solids. For example, measuring thermal conductivity of solids shown the fallacy of the proposed approach and the illegality of the use of the principle of ambiguity to intensive thermal quantities. As a proof of the error of the approach, the relations for the thermal conductivities of the component elements of a heat pump that implements a multi-valued measure of thermal conductivity are given, and the limiting cases are considered. In two ways, it is established that the thermal conductivity of the specified measure does not depend on the value of the supplied heat flow. It is shown that the declared accuracy of the thermal conductivity measurement method does not correspond to the actual achievable accuracy values and the standard for the unit of surface heat flux density GET 172-2016. The estimation of the currently achievable accuracy of measuring the thermal conductivity of solids is given. The directions of further research and possible solutions to the problem are given.

Supercontinuum laser-based monochromatic radiant source for detector spectral responsivity characterization in the range 0.9–1.6 μm using absolute cryogenic radiometer

2020 ◽  
pp. 28-33
Author(s):  
A. Yu. Dunaev ◽  
A. S. Baturin ◽  
V. N. Krutikov ◽  
S. P. Morozova
Keyword(s):  
Power Distribution ◽  
Spectral Power ◽  
Feedback System ◽  
Operating Mode ◽  
Spectral Responsivity ◽  
Spectral Power Distribution ◽  
Cryogenic Radiometer ◽  
Supercontinuum Laser ◽  
Radiant Power ◽  
Double Monochromator

An improved monochromatic radiant source with spectral bandwidth of 4 nm based on supercontinuum laser and a double monochromator was included in absolute cryogenic radiometer-based facility to improve the accuracy of spectral responsivity measurement in the range 0.9–1.6 μm. The developed feedback system ensures stabilization of monochromatic radiant power with standard deviation up to 0.025 %. Radiant power that proceeds detector under test or absolute cryogenic radiometer varies from 0.1 to 1.5 mW in dependence of wavelength. The spectral power distribution of its monochromatic source for various operating mode is presented.

Acoustic Distance Measurement Method Using 2ch Microphones Measurable from 0m Based on Phase Interference and Removal of DC Component

2015 ◽  
Vol 135 (11) ◽  
pp. 1349-1350
Author(s):  
Kazuhiro Suzuki ◽  
Noboru Nakasako ◽  
Masato Nakayama ◽  
Toshihiro Shinohara ◽  
Tetsuji Uebo
Keyword(s):  
Measurement Method ◽  
Distance Measurement ◽  
Phase Interference ◽  
Dc Component
Sign in / Sign up

Export Citation Format

Share Document