Research on intelligent spectrum monitoring based on power transformer

2021 ◽  
Author(s):  
Haiping Zhang ◽  
Minghua Jiang ◽  
Jianwei Xu ◽  
Jing Wang ◽  
Ke Liu
Keyword(s):  
Power Transformer ◽  
Spectrum Monitoring

Effect of No-load and Load Condition on Transformer Sound

2018 ◽  
pp. 11-15
Author(s):  
Dr. Hitesh Paghadar
Keyword(s):  
Experimental Study ◽  
Power Transformer ◽  
Load Condition ◽  
Noise Pollution ◽  
Sound Level ◽  
Measurement Scale ◽  
Dominant Factor ◽  
Public Attention ◽  
Level Measurement ◽  
Human Ear

Increasing environment noise pollution is a matter of great concern and of late has been attracting public attention. Sound produces the minute oscillatory changes in air pressure and is audible to the human ear when in the frequency range of 20Hz to 20 kHz. The chief sources of audible sound are the magnetic circuit of transformer which produces sound due to magnetostriction phenomenon, vibration of windings, tank and other structural parts, and the noise produced by cooling equipments. This paper presents the validation for sound level measurement scale, why A-weighted scale is accepted for sound level measurement, experimental study carried out on 10MVA Power Transformer. Also presents the outcomes of comparison between No-Load sound & Load sound level measurement, experimental study carried out on different transformer like - 10MVA, 50MVA, 100MVA Power Transformer, to define the dominant factor of transformer sound generation.

Determination of parameters of short circuit of power transformer by means of mathematical modeling

2017 ◽  
Vol 26 (102) ◽  
pp. 110-119
Author(s):  
D. S. Yarymbash, ◽  
◽  
S. T. Yarymbash, ◽  
T. E. Divchuk, ◽  
D. A. Litvinov
Keyword(s):  
Mathematical Modeling ◽  
Power Transformer ◽  
Short Circuit ◽  
Determination Of Parameters

A Solid-State On-Load Tap Changer for the Power Transformers of 10—0.4 kV Distribution Networks

Vestnik MEI ◽  
2020 ◽  
Vol 6 (6) ◽  
pp. 82-90
Author(s):  
Dmitriy I. Panfilov ◽  
◽  
Mikhail G. Astashev ◽  
Aleksandr V. Gorchakov ◽  
◽  
...  
Keyword(s):  
Solid State ◽  
Physical Model ◽  
High Speed ◽  
Power Transformer ◽  
Voltage Control ◽  
Power Transformers ◽  
Control Algorithms ◽  
Load Voltage ◽  
Tap Changer ◽  
Load Tap Changer

The specific features relating to voltage control of power transformers at distribution network transformer substations are considered. An approach to implementing high-speed on-load voltage control of serially produced 10/0.4 kV power transformers by using a solid-state on-load tap changer (SOLTC) is presented. An example of the SOLTC circuit solution on the basis of thyristor switches is given. On-load voltage control algorithms for power transformers equipped with SOLTC that ensure high reliability and high-speed operation are proposed. The SOLTC performance and the operability of the suggested voltage control algorithms were studied by simulation in the Matlab/Simulink environment and by experiments on the SOLTC physical model. The structure and peculiarities of the used simulation Matlab model are described. The SOLTC physical model design and its parameters are presented. The results obtained from the simulating the SOLTC operation on the Matlab model and from the experiments on the SOLTS physical model jointly with a power transformer under different loads and with using different control algorithms are given. An analysis of the experimental study results has shown the soundness of the adopted technical solutions. It has been demonstrated that the use of an SOLTC ensures high-speed voltage control, high efficiency and reliability of its operation, and arcless switching of the power transformer regulating taps without load voltage and current interruption. By using the SOLTC operation algorithms it is possible to perform individual phase voltage regulation in a three-phase 0.4 kV distribution network. The possibility of integrating SOLTC control and diagnostic facilities into the structure of modern digital substations based on the digital interface according to the IEC 61850 standard is noted.

Evaluation of the Power Transformer Magnetizing Inrush Currents

2020 ◽  
Vol 10 (10) ◽  
pp. 20-32
Author(s):  
Aleksey A. KUVSHINOV ◽  
◽  
Vera V. VAKHNINA ◽  
Aleksey N. CHERNENKO ◽  
◽  
...  
Keyword(s):  
Power Transformer ◽  
Geomagnetic Disturbance ◽  
Inrush Current ◽  
Geomagnetic Disturbances ◽  
Disturbance Intensity ◽  
Magnetizing Inrush Current ◽  
Inrush Currents ◽  
Instantaneous Values ◽  
The Mathematical Model ◽  
Analytical Expressions

The mathematical model of a shell-core power transformer’s magnetization branch is substantiated. By using the model, analytical expressions for the magnetizing current instantaneous values under the conditions of geomagnetic disturbances can be obtained. Quantitative assessments of the magnetizing inrush current amplitudes and durations versus the geomagnetic disturbance intensity are obtained. The dynamics of the power transformer magnetic system saturation transient and changes in the magnetization inrush current amplitudes and durations after a sudden occurrence of geomagnetic disturbances are shown. The error of estimating the magnetizing inrush current amplitudes under geomagnetic disturbances is determined based on comparison with experimental data.

The influence of ultrasound signal parameters on sonoluminescence light intensity

2013 ◽  
Vol 62 (4) ◽  
pp. 605-612
Author(s):  
Marek Szmechta ◽  
Tomasz Boczar ◽  
Dariusz Zmarzły
Keyword(s):  
Acoustic Emission ◽  
Acoustic Waves ◽  
Power Transformer ◽  
Electrical Power ◽  
Partial Discharges ◽  
Research Project ◽  
Insulation Systems ◽  
Secondary Phenomenon ◽  
New Research ◽  
The Relationship

Abstract Topics of this article concern the study of the fundamental nature of the sonoluminescence phenomenon occurring in liquids. At the Institute of Electrical Power Engineering at Opole University of Technology the interest in that phenomenon known as secondary phenomenon of cavitation caused by ultrasound became the genesis of a research project concerning acoustic cavitation in mineral insulation oils in which a number of additional experiments performed in the laboratory aimed to determine the influence of a number of acoustic parameters on the process of the studied phenomenona. The main purpose of scientific research subject undertaken was to determine the relationship between the generation of partial discharges in high-voltage power transformer insulation systems, the issue of gas bubbles in transformer oils and the generated acoustic emission signals. It should be noted that currently in the standard approach, the phenomenon of generation of acoustic waves accompanying the occurrence of partial discharges is generally treated as a secondary phenomenon, but it can also be a source of many other related phenomena. Based on our review of the literature data on those referred subjects taken, it must be noted, that this problem has not been clearly resolved, and the description of the relationship between these phenomena is still an open question. This study doesn’t prove all in line with the objective of the study, but can be an inspiration for new research project in the future in this topic. Solution of this problem could be a step forward in the diagnostics of insulation systems for electrical power devices based on non-invasive acoustic emission method.

Sign in / Sign up

Export Citation Format

Share Document