Analysis of the influence of channel parameters of seven channel road Rzeppa constant velocity universal joint on the stress of steel ball

2021 ◽  
Author(s):  
Kun Xie ◽  
Zhengyu Liu ◽  
Xin Ding ◽  
Baoshu Shi
Keyword(s):  
Constant Velocity ◽  
Steel Ball ◽  
Universal Joint ◽  
Channel Parameters

The Scope for a Compliant Homokinetic Coupling Based on Review of Compliant Joints and Rigid-Body Constant Velocity Universal Joints

2012 ◽  
Author(s):  
Davood Farhadi Machekposhti ◽  
N. Tolou ◽  
J. L. Herder
Keyword(s):  
Rigid Body ◽  
Constant Velocity ◽  
Compliant Mechanism ◽  
Analytical Data ◽  
Graph Representation ◽  
Universal Joint ◽  
Compliant Joints ◽  
Cylindrical Joint ◽  
Body Joints ◽  
Universal Joints

Many applications require a compliant mechanism to transmit rotation from one direct to another direct with constant velocity. This paper presents a literature survey towards the design of compliant constant velocity universal joints. The traditional constant velocity universal joints available from the literature were studied, classified and their mechanical efficiencies were compared. Also the graph representation of them was studied. In the same manner, literature review for different kind of compliant joints suitable for the Rigid-Body-Replacement of constant velocity universal joints was also performed. For the first time a comparison with analytical data of compliant joints was performed. All of compliant universal joints are non-constant velocity and designed based on rigid Hooke’s universal joint. Also we show there are no equivalent compliant joints for some rigid-body joints such as cylindrical joint, planar joint, spherical fork joint and spherical parallelogram quadrilateral joint. However, we may achieve them by combining numbers of available compliant joints. The universal joints found are non-compliant non-constant velocity universal joint, non-compliant constant velocity universal joint or compliant non-constant velocity universal joint. A compliant constant velocity universal joint has a great horizon for developments, for instance in medical or rehabilitation devices.

Study on Comprehensive Performance Testing Table and Intelligent Measuring Technology of Constant Velocity Universal Joint Assembly

2012 ◽  
Vol 591-593 ◽  
pp. 1539-1542
Author(s):  
Lun Shi ◽  
Xu Qi Qin ◽  
Xiao Jun Liu
Keyword(s):  
Constant Velocity ◽  
Performance Testing ◽  
Fuzzy Reasoning ◽  
Measuring Method ◽  
Measurement Precision ◽  
Universal Joint ◽  
Fuzzy Method ◽  
Comprehensive Performance ◽  
And Control ◽  
Joint Assembly

A comprehensive performance testing table, on which 9 testing items can be done, of the constant velocity joint drive shaft assembly is developed. The principle of the system is introduced and the mechanical structure and the computer measuring and control system of it are discussed particularly. Some intelligent measuring methods, such as fuzzy method, are used in the system and an example of testing the slip curve characteristic of the joint assembly by fuzzy measuring method is presented in detail, including its membership function and fuzzy rules of fuzzy reasoning. The slip curve measured by traditional method compared with that by fuzzy method. The experimental results show that the measurement precision by fuzzy method is more accurate than that by the traditional one.

A Fully Compliant Constant Velocity Universal Joint

2015 ◽  
Author(s):  
D. Farhadi Machekposhti ◽  
N. Tolou ◽  
J. L. Herder
Keyword(s):  
Rigid Body ◽  
Rotational Motion ◽  
Constant Velocity ◽  
Large Deflection ◽  
Experimental Results ◽  
Universal Joint ◽  
Compliant Structure ◽  
Body Model ◽  
Rigid Body Model ◽  
Kinematic Properties

This paper presents the concept and fabrication of a large deflection compliant Constant Velocity universal joint (CV joint). A novel compliant structure is proposed based on the 6R Hybrid spatial overconstrained linkage. Due to symmetry, its kinematic properties are such that can transfer rotational motion between two angled shafts with true constant velocity. The kinematic of the mechanism and the Pseudo-Rigid-Body model of its compliant configuration are studied and analyzed. A prototype was manufactured and experimentally evaluated. It was verified that the experimental results are consistent with the theoretical expectations.

The Evolution of a Constant Velocity Universal Joint

1965 ◽  
Author(s):  
Sidney Oldberg ◽  
Robert Stuemky
Keyword(s):  
Constant Velocity ◽  
Universal Joint

The Displacement Analysis of the Generalized Tracta Coupling

1970 ◽  
Vol 37 (3) ◽  
pp. 713-719 ◽  
Author(s):  
D. M. Wallace ◽  
F. Freudenstein
Keyword(s):  
Constant Velocity ◽  
General Mechanism ◽  
Universal Joint ◽  
Displacement Analysis ◽  
Spatial Mechanism ◽  
Input And Output ◽  
Previous Solution ◽  
The Subject ◽  
Algebraic Solutions ◽  
Special Case

The displacement analysis of spatial linkages has been the subject of a number of recent investigations, using a variety of mathematical approaches. Algebraic solutions have been developed principally, in cases in which the number of links, n, is less than or equal to 4. When n > 4, the complexity of the displacement analysis appears to increase by one or more orders of magnitude. In this paper we describe a method, which we call the geometric-configuration method, which we have used when n > 4. The method is illustrated with respect to the algebraic displacement analysis of a five-link spatial mechanism, which includes the Tracta joint as a special case. The Tracta joint is a spatial linkage of symmetrical proportions functioning as a constant-velocity universal joint for nonparallel, intersecting shafts (Myard, 1933). It has four turning or revolute pairs (R) and one plane pair (E), which is located symmetrically with respect to the input and output shafts. The generalization of this linkage, which we call the generalized Tracta coupling, is the R-R-E-R-R spatial linkage with general proportions. The displacement analysis of the general mechanism, for which we know of no previous solution, has been derived. An analysis of the effect of tolerances in the Tracta joint has been included.

Sign in / Sign up

Export Citation Format

Share Document