Experiments and numerical simulation of thermal effect of the xenon lamp on the cotton-padded jacket

2021 ◽  
Author(s):  
Wei Jin ◽  
Tao HUANG ◽  
Yun-song FENG ◽  
You-cai CHEN
Keyword(s):  
Numerical Simulation ◽  
Thermal Effect ◽  
Xenon Lamp

Numerical Simulation of the Thermal Effect in the Cavitating Venturi Flow

2013 ◽  
Author(s):  
Donggang Cao ◽  
Guo-qiang He ◽  
Hong-liang Pan ◽  
Fei Qin
Keyword(s):  
Numerical Simulation ◽  
Thermal Effect

The Thermal Elastohydrodynamic Lubrication Analysis of Seawater-Lubricated Thordon Bearing

2011 ◽  
Vol 396-398 ◽  
pp. 2507-2510 ◽  
Author(s):  
Li Jing Zhang ◽  
You Qiang Wang
Keyword(s):  
Numerical Simulation ◽  
Film Thickness ◽  
Thermal Effect ◽  
Thermal Condition ◽  
Reynolds Equation ◽  
Elastohydrodynamic Lubrication ◽  
Shaft Diameter ◽  
Pressure Peak

Based on Reynolds equation, the numerical simulation of thermal elstohydronamic lubrication for seawater-lubricated thordon bearing was carried out, the effects of the load, the speed and the shaft diameter on the pressure and the film thickness were discussed. The results show that thermal effect has little effect on the pressure, but the film thickness under the thermal condition is smaller than isothermal. The pressure peak is increased and the film thickness is decreased greatly with the increase of load. The pressure peak is decreased and the film thickness is increased greatly with the increase of speed.

scholarly journals Three-dimensional inhomogeneous thermal fields of the “Photon-Amur 2.0” payload electronic board developed for nanosatellites

2021 ◽  
Vol 20 (2) ◽  
pp. 74-82
Author(s):  
D. V. Fomin ◽  
M. A. Barulinа ◽  
A. V. Golikov ◽  
D. O. Strukov ◽  
A. S. German ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Thermal Effect ◽  
Outer Space ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Control Board ◽  
Electronic Components ◽  
Thermal Fields ◽  
Electronic Board ◽  
High Orbit

The thermal fields of the Photon-Amur 2.0 payload electronic board developed for nanosatellites were studied. The Photon-Amur 2.0 payload consists of an electronic control board with a casing mounted in a nanosatellite and a remote panel with experimental photovoltaic converters. A modified heat balance method was used for numerical simulation of the thermal fields of the control board and the casing. The constructed model and the obtained results of the numerical simulation were verified by comparison with the thermal diagrams obtained for the Photon-Amur 2.0 electronic board under normal operating conditions. For modeling the outer space operating conditions, it was assumed that there is a vacuum outside and inside the Photon-Amur 2.0 casing, and the thermal effect is transmitted from the nanosatellite racks to the payload electronic board through the fastenings. The thermal effect is of a periodic nature with amplitude of 45 to +80○C and a period of 96 min, which approximately corresponds to the motion of a nanosatellite in a 575 km-high orbit. It was demonstrated that with such composition of the payload module, its casing can work as a passive thermoregulator of thermal fields on the electronic board of Photon-Amur 2.0. The simulation showed that the casing helps to keep the temperature on the control board in the interval of 15C to +85C, which is acceptable for the electronic components used on the payload control board.

Numerical simulation of thermal effect on metal irradiated by high-power laser beam in different airflow

2010 ◽  
Vol 22 (11) ◽  
pp. 2531-2534 ◽  
Author(s):  
郑艳丽 Zheng Yanli ◽  
杜太焦 Du Taijiao ◽  
束庆邦 Shu Qingbang ◽  
王建国 Wang Jianguo
Keyword(s):  
Numerical Simulation ◽  
Laser Beam ◽  
Thermal Effect ◽  
High Power ◽  
High Power Laser ◽  
Power Laser

Parameter Design and Thermal Effect Numerical Simulation of 10 kW Fiber Connector

2021 ◽  
Vol 58 (1) ◽  
pp. 0114009
Author(s):  
章曦 Zhang Xi ◽  
李平雪 Li Pingxue ◽  
董雪岩 Dong Xueyan ◽  
杨卫鑫 Yang Weixin
Keyword(s):  
Numerical Simulation ◽  
Thermal Effect ◽  
Parameter Design

scholarly journals Calculation Model of Photochemical Reactor with a Pulse Xenon Lamp for Water Treatment

2016 ◽  
Vol 5 (4) ◽  
pp. 51-57
Author(s):  
Ивашкин ◽  
A. Ivashkin ◽  
Новиков ◽  
D. Novikov ◽  
Камруков ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Energy Efficiency ◽  
Water Treatment ◽  
Calculation Model ◽  
Model Verification ◽  
Xenon Lamp ◽  
Physical Processes ◽  
Chemical Pollutants ◽  
Calculation Module ◽  
Particles Trajectories

A calculation model of the photochemical reactor based on a pulse xenon lamp and intended for water treatment from microbiological or chemical pollutants has been developed and realized. The model includes several calculation modules, each one describes the basic physical processes ongoing in the photochemical reactor: current’s form calculation module, pollutant’s particles trajectories calculation module, pulse lamp’s radiating characteristics calculation module, module for photometric calculation, determining an energy radiation dose of pollutant particles. Calculation of lamp’s radiating characteristics is based on ideas of gas discharge physics and on a number of empirical dependences, for calculation of other parameters has been used the numerical simulation. Model verification has been carried out by comparison of calculated and experimental efficiencies for two types of photochemical reactors’ designs with use of the known pollutant. The developed calculation model allows perform multi-parameter optimization for designs and regime parameters of pulse photochemical reactors for the purpose of increase their energy efficiency, and level of water treatment from various chemical and biological pollutants.

Sign in / Sign up

Export Citation Format

Share Document