Determination of the high-speed plasma jet injection parameters in the "Fluxus" experiments

2021 ◽  
Author(s):  
Tatiana Losseva ◽  
Anatoly Golub' ◽  
Igor Kosarev ◽  
Yury Poklad ◽  
Andrey Lyakhov
Keyword(s):  
High Speed ◽  
Plasma Jet ◽  
Jet Injection ◽  
Injection Parameters

Anode Boundary Layer Effects in Plasma Spray Torches

2000 ◽  
Author(s):  
Z. Duan ◽  
J. Heberlein
Keyword(s):  
Boundary Layer ◽  
Plasma Torch ◽  
High Speed ◽  
Plasma Jet ◽  
Coating Quality ◽  
Gas Entrainment ◽  
Framing Rate ◽  
Mass Flow Rates ◽  
Cold Gas

Abstract The control over coating quality in plasma spraying is partly dependent on the arc and jet instabilities of the plasma torch. Different forms of instabilities have been observed with different effects on the coating quality. We report on an investigation of these instabilities based on high-speed end-on observation of the arc. The framing rate of 40,500 frames per second has allowed the visualization of the anode attachment movement and the determination of the thickness of the cold gas boundary layer surrounding the arc. The images have been synchronized with voltage traces. Data have been obtained for a range of arc currents, mass flow rates, for different gas injectors and for anodes displaying different amounts of wear. The analysis of the data has led to quantitative correlations between the cold gas boundary layer thickness and the instability mode for the range of operating parameters. The arc instabilities can be seen to enhance the plasma jet instabilities and the cold gas entrainment. These results are particular useful for guiding plasma torch design and operation to minimize the influence of plasma jet instabilities on coating properties.

Sampling, Preservation and Counting of Samples II: Zooplankton

2017 ◽  
Author(s):  
Peter H. Wiebe ◽  
Ann Bucklin ◽  
Mark Benfield
Keyword(s):  
Genetic Analysis ◽  
High Speed ◽  
Morphological Analysis ◽  
Taxonomic Composition ◽  
Sampling Techniques ◽  
Sample Analysis ◽  
Sample Preservation ◽  
The Past ◽  
Plankton Collection

This chapter reviews traditional and new zooplankton sampling techniques, sample preservation, and sample analysis, and provides the sources where in-depth discussion of these topics is addressed. The net systems that have been developed over the past 100+ years, many of which are still in use today, can be categorized into eight groups: non-opening/closing nets, simple opening/closing nets, high-speed samplers, neuston samplers, planktobenthos plankton nets, closing cod-end samplers, multiple net systems, and moored plankton collection systems. Methods of sample preservation include preservation for sample enumeration and taxonomic morphological analysis, and preservation of samples for genetic analysis. Methods of analysis of zooplankton samples include determination of biomass, taxonomic composition, and size by traditional methods; and genetic analysis of zooplankton samples.

scholarly journals High-Speed Video Analysis of the Process Stability in Plasma Spraying

2021 ◽  
Author(s):  
K. Bobzin ◽  
M. Öte ◽  
M. A. Knoch ◽  
I. Alkhasli ◽  
H. Heinemann
Keyword(s):  
Plasma Spraying ◽  
High Speed ◽  
Plasma Jet ◽  
Plasma Jets ◽  
Time Dependent ◽  
Acquisition Time ◽  
Fast Fourier Transformation ◽  
Frequency Spectra ◽  
Dependent Signal ◽  
The Stability

AbstractIn plasma spraying, instabilities and fluctuations of the plasma jet have a significant influence on the particle in-flight temperatures and velocities, thus affecting the coating properties. This work introduces a new method to analyze the stability of plasma jets using high-speed videography. An approach is presented, which digitally examines the images to determine the size of the plasma jet core. By correlating this jet size with the acquisition time, a time-dependent signal of the plasma jet size is generated. In order to evaluate the stability of the plasma jet, this signal is analyzed by calculating its coefficient of variation cv. The method is validated by measuring the known difference in stability between a single-cathode and a cascaded multi-cathode plasma generator. For this purpose, a design of experiment, covering a variety of parameters, is conducted. To identify the cause of the plasma jet fluctuations, the frequency spectra are obtained and subsequently interpreted by means of the fast Fourier transformation. To quantify the significance of the fluctuations on the particle in-flight properties, a new single numerical parameter is introduced. This parameter is based on the fraction of the time-dependent signal of the plasma jet in the relevant frequency range.

Reynolds-averaged Navier–Stokes simulation of hydrofoil effects on hydrodynamic coefficients of a catamaran in forced oscillation

2016 ◽  
Vol 231 (2) ◽  
pp. 364-383
Author(s):  
Amin Najafi ◽  
Mohammad Saeed Seif
Keyword(s):  
High Speed ◽  
Experimental Approach ◽  
Navier Stokes ◽  
Hydrodynamic Coefficients ◽  
Laboratory Equipment ◽  
Factors Affecting ◽  
High Frequencies ◽  
Frequency Independent ◽  
Reynolds Averaged Navier Stokes

Determination of high-speed crafts’ hydrodynamic coefficients will help to analyze the dynamics of these kinds of vessels and the factors affecting their dynamic stabilities. Also, it can be useful and effective in controlling the vessel instabilities. The main purpose of this study is to determine the coefficients of longitudinal motions of a planing catamaran with and without a hydrofoil using Reynolds-averaged Navier–Stokes method to evaluate the foil effects on them. Determination of hydrodynamic coefficients by experimental approach is costly and requires meticulous laboratory equipment; therefore, utilizing the numerical methods and developing a virtual laboratory seem highly efficient. In this study, the numerical results for hydrodynamic coefficients of a high-speed craft are verified against Troesch’s experimental results. In the following, after determination of hydrodynamic coefficients of a planing catamaran with and without foil, the foil effects on its hydrodynamic coefficients are evaluated. The results indicate that most of the coefficients are frequency-independent especially at high frequencies.

THE DETERMINATION OF DIGITAL WIENER FILTERS BY MEANS OF GRADIENT METHODS

Geophysics ◽  
1973 ◽  
Vol 38 (2) ◽  
pp. 310-326 ◽  
Author(s):  
R. J. Wang ◽  
S. Treitel
Keyword(s):  
Seismic Data ◽  
High Speed ◽  
Gradient Methods ◽  
Wiener Filter ◽  
Gradient Algorithm ◽  
Rapid Convergence ◽  
True Solution ◽  
Peripheral Device ◽  
Wiener Filters

The normal equations for the discrete Wiener filter are conventionally solved with Levinson’s algorithm. The resultant solutions are exact except for numerical roundoff. In many instances, approximate rather than exact solutions satisfy seismologists’ requirements. The so‐called “gradient” or “steepest descent” iteration techniques can be used to produce approximate filters at computing speeds significantly higher than those achievable with Levinson’s method. Moreover, gradient schemes are well suited for implementation on a digital computer provided with a floating‐point array processor (i.e., a high‐speed peripheral device designed to carry out a specific set of multiply‐and‐add operations). Levinson’s method (1947) cannot be programmed efficiently for such special‐purpose hardware, and this consideration renders the use of gradient schemes even more attractive. It is, of course, advisable to utilize a gradient algorithm which generally provides rapid convergence to the true solution. The “conjugate‐gradient” method of Hestenes (1956) is one of a family of algorithms having this property. Experimental calculations performed with real seismic data indicate that adequate filter approximations are obtainable at a fraction of the computer cost required for use of Levinson’s algorithm.

Reducing Engine-Out Emissions for Medium High Speed Diesel Engines: Influence of Injection Parameters

2009 ◽  
Author(s):  
Pieter Roels ◽  
Yves Sledsens ◽  
Sebastian Verhelst ◽  
Roger Sierens ◽  
Lieven Vervaeke
Keyword(s):  
Diesel Engines ◽  
High Speed ◽  
Injection Parameters ◽  
High Speed Diesel
Sign in / Sign up

Export Citation Format

Share Document